HD88921: COMPO DSG : COPY/PASTE OF COMPOSITE PARAMETERS GIVES WRONG NAMI NG

APAR status

• Closed as unreproducible in next release.

Error description

• Scenario
  1) Open Composite part with the "composite
  parameters" feature
  2) Create a new part
  3) Select the
  "composite parameters" feature in the composite part and
  copy.
  4) Activate the new part and paste the "composite
  parameters" feature.
  5) Currently it shows Knowledgeware
  parameter path.
  Expected Results:
  The composite parameters
  feature should be created and orientation names should be correc
  correct
  

Local fix

Problem summary

• Scenario
  1) Open Composite part with the "composite
  parameters" feature
  2) Create a new part
  3) Select the
  "composite parameters" feature in the composite part and
  copy.
  4) Activate the new part and paste the "composite
  parameters" feature.
  5) Currently it shows Knowledgeware
  parameter path.
  Expected Results:
  The composite parameters
  feature should be created and orientation names should be correc
  correct
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON  VERSION V5R19.
  THIS PROBLEM IS
  NOT REPRODUCIBLE ON VERSION V5R20 GA level
  Additional Closure
  Information:
  The problem was reproduced on V5R19SP05, but no
  more reproduced on V5R20 level
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN

     UP