HD88756: MACHINING (NCMACSIMU) / NOT POSSIBLE TO LOAD THE SIMULATION RE SULT FOR COLLISION CHECK

APAR status

• Closed as unreproducible in next release.

Error description

• Machining (NCMacSimu)/ Not possible to load the simulation
  result for collision check
  .
  Scenario:
  1- Open CATIA
  2- Open the Process file
  3- RMB on Spiral Milling.2 in the 1st MFG program
  4- Click on Load Simulation Result
  .
  Problem:CATIA Abends
  .
  Expected result:CATIA should not ABEND
  .
  

Local fix

Problem summary

• Machining (NCMacSimu)/ Not possible to load the simulation
  result for collision check
  .
  Scenario:
  1- Open CATIA
  2- Open
  the Process file
  3- RMB on Spiral Milling.2 in the 1st MFG
  program
  4- Click on Load Simulation Result
  .
  Problem:CATIA
  Abends
  .
  Expected result:CATIA should not ABEND
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  VERSION V5R19.
  THIS
  PROBLEM IS NOT REPRODUCIBLE ON :
  VERSION V5R20 GA level
  VERSION V5R19 SP6.
  Additional Closure Information:
  Incident
  Diagonosis
  .
  Machining (NCMacSimu) /  Not possible to load the
  simulation result for collision check
  .
  Reason
  .
  The scenario
  is UR
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R519 PSN SP51906

     UP09/10/27 I 1000