HD88289: COMPO DESIGN :ERROR WHEN CREATE BUTT SPLICE .

APAR status

• Closed as program error.

Error description

• Compo Design :Error when create Butt Splice
  .
  Scenario.
  .
  1) Open the CATPart, Workbench Composite Design
  2) Edit 3D MultiSplice5 , Click OK
  3) Error occurs Butt Splice not possible ( Failure at Ply10)
  Expected Result.
  Butt splice creation is possible.
  .
  

Local fix

Problem summary

• Compo Design :Error when create Butt Splice
  .
  Scenario.
  .
  1)
  Open the CATPart, Workbench Composite Design
  2) Edit 3D
  MultiSplice5 , Click OK
  3) Error occurs Butt Splice not
  possible ( Failure at Ply10)
  Expected Result.
  Butt splice
  creation is possible.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON   VERSION V5R20 GA level.
  NOTE
  THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R19 SP6.
  Additional
  Closure Information:
  Incident Diagnosis:
  Ply material in the
  butt-splice zone is taken from overlapped ply.
  .
  Correction
  Explanation :
  This is corrected by creating a overlapped
  butt-splice parallel.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51906

     UP09/10/27 I 1000