IT03846: NETWORK VLAN CONFIGURATION FAILS DUE TO A "MISMATCHED PORT SETTINGS" ERROR.

IBM PureApplication System Version 1.1.0.5

APAR status

• Closed as program error.

Error description

• An error can be encountered when performing network
  configuration activities on the PureApplication System.  This
  can also be seen when completing the network setup activities
  for the system when it is first setup at the customer site.
  Below is an example of errors that might be seen during the SGEN
  process.   Error code 403
  
  -----
  pooljvm.1405430196748.113 [01-01-14 14:38:49] 39879
  global_config.cgen | value of exception:
  VGENUtilities.GenesisException: RackXXXX-XXX 1000000: Errors
  were found while verifying the top-of-rack switches.
  pooljvm.1405430196748.113 [01-01-14 14:38:49] 39879
  global_config.cgen | RackXXXX-XXX 1000000: Errors were found
  while verifying the top-of-rack switches.
  pooljvm.1405430196748.113 [001-01-14 14:38:49] 39879
  global_config.cgen | RackXXXX-XXX 1000000 TOR 1 (bottom, Rack
  Unit 41): Errors were found during verification.
  pooljvm.1405430196748.113 [01-01-14 14:38:49] 39879
  global_config.cgen | RackXXXX-XXX 1000000 TOR 1 (bottom, Rack
  Unit 41): The current configuration does not match the
  predefined configuration. Contact IBM Service.
  pooljvm.1405430196748.113 [01-01-14 14:38:49] 39879
  global_config.cgen | Mismatched Configuration Entry: Interface
  port settings (interface port 64): There are entries for this
  command in the current configuration file. However, none of them
  have settings which match the expected file settings:
  [description "Port 64", switchport mode trunk, switchport trunk
  native vlan 999, switchport trunk allowed vlan 1,2867,999,
  exit].
  -----
  

Local fix

Problem summary

• The network configuration verification process was raising false
  switch configuration error events and then exiting the
  verification stage.
  

Problem conclusion

• A fix is being provided to log the "switch mismatched
  configuration" error and continue the system verification
  process.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  PAPP SYS 8382 I

• Fixed component ID

  5725G3200

Applicable component levels

• R110 PSY

     UP

• R200 PSY

     UP

• R100 PSN

     UP

• RESP PSN

     UP