IV19831: UNABLE TO PUSH VERSIONED DEVICE CONFGIURATION TO JUNIPER EX WHEN INTERFACE FAMILY IS SET TO ETHERNET-SWITCHING

APAR status

• Closed as program error.

Error description

• Error in UOW log:
  <xnm:error xmlns="http://xml.juniper.net/xnm/1.1/xnm"
  xmlns:xnm="http://xml.juniper.net/xnm/1.1/xnm">
  <source-daemon>eswd</source-daemon>
  <edit-path>[edit interfaces ge-0/1/0 unit 0]</edit-path>
  <statement>family</statement>
  <message>When ethernet-switching family is configured on an
  interface, no other family type can be configured on the same
  interface.</message>
  </xnm:error>
  
  
  
  This was configured on the Current configuration:
  
  <interface>
              <name junos:key="key">ge-0/1/0</name>
              <description>CSR LTE upgrade to ixia 12/7,
  RI</description>
              <unit>
                  <name junos:key="key">0</name>
                  <family>
                      <ethernet-switching>
                      </ethernet-switching>
                  </family>
              </unit>
          </interface>
  
  
  Then we try to add family inet to push the version config and
  the device does not allow that
  
  The application will need to remove the family
  ethernet-switching prior to adding family inet.
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED:                                              *
  * ITNCM customers using the juniper_switch_ex_10.0 SmartModel  *
  * Driver                                                       *
  ****************************************************************
  * PROBLEM DESCRIPTION:                                         *
  * Pushing a versioned config fails with the error "When        *
  * ethernet-switching family is configured on an interface, no  *
  * other family type can be configured on the same interface"   *
  * The ITNCM driver does not properly remove the family         *
  * ethernet-switching prior to adding family inet.              *
  ****************************************************************
  * RECOMMENDATION:                                              *
  * Upgrade to Drivers 16 when available                         *
  ****************************************************************
  

Problem conclusion

• Prevented the junoscript 'replace' markup from being used in
  restore versioned config operations, instead using regular
  markup as used in config changes.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  N/C CONFIG MGR(

• Fixed component ID

  5724Z3100

Applicable component levels

• R620 PSY

     UP

• R630 PSY

     UP