PI93547: Attribute DB2_System_States.Bytes_written_to_log has incorrect label. MB/S is incorrect. Should be just MB

APAR status

Closed as program error.

Error description

RKANDATV(KDPATR) Attribute
DB2_System_States.Bytes_written_to_log is written with the
caption 'Bytes written\to log (MB/s)'. The caption displays as
Bytes written
to log (MB/S)

The caption should read 'Bytes written\to log (MB)' and display
as
Bytes written
to log (MB)

This value is not a rate but the count of MB log data written.
It is based on DB2 IFCID field QJSTCIWR which is the number of
CI written to the log(s).

Local fix

Apply PTF when available. You may make the following changes
In RKANDATV(KDPDOC) for attribute 'Bytes written to log'
Change caption from
*CAPTION:  Bytes written\to log (MB/s)
to
*CAPTION:  Bytes written\to log (MB)

Replace the information on the *TEST lines with the following
Please maintain the spacing as it exists in the member.

The megabytes of data written to the active log data
set. It was calculated by multiplying QJSTCIWR
(label LOG CI WRITTEN (LOG1&2)) by 4096,
then dividing the result by (1024 * 1024 * 2).
This figure is valid for dual logging, if single logging
is used, multiply the value shown by 2.

Problem summary

****************************************************************
* USERS AFFECTED: OMEGAMON XE for DB2 PE/DB2 PM users of       *
*                 component                                    *
*                 TEP                                          *
*                 Enhanced 3270 UI                             *
****************************************************************
* PROBLEM DESCRIPTION: PI74895 -                               *
*                      KDPPZPRM PANEL IS NOT ACCESSIBLE VIA    *
*                      TAB NAVIGATION.                         *
*                                                              *
*                      PI93547 -                               *
*                      Wrong label for                         *
*                      DB2_System_States.Bytes_written_to_log. *
*                                                              *
*                      PI93936 -                               *
*                      Query UDQ-110.06.24-16.18.09-00001      *
*                      for workspace "testing with idname"     *
*                      (kdp) was not exported during tacmd     *
*                      exportworkspaces                        *
****************************************************************
* RECOMMENDATION: Apply the provided PTF.                      *
****************************************************************
PI74895 - KDPPZPRM PANEL IS NOT ACCESSIBLE VIA TAB NAVIGATION.
  Problem Summary:
          Tab -ALL- was ignored in DSG DSNZPARM navigation.

PI93547 - Wrong label for DB2_System_States.Bytes_written_to_log
  Problem Summary:
          Attribute "Bytes written to log" in attribute group
          "DB2_System_States" was mislabeled to
          "Bytes written to log (MB/s)"

PI93936 - Query UDQ-110.06.24-16.18.09-00001 for workspace
          "testing with idname" (kdp) was not exported during
          tacmd exportworkspaces

  Problem Summary:
          During tacmd exportWorkspaces for DB2 application
          support queries, customers may encounter
          "KUICEW021W One or more queries required by
          an exported workspace could not be exported."
          In &TEPS_HOME\logs\TepImportExportCLI_0.log, customer
          might see "SEVERE: --> RequestException caught, error
          code =-109" for the following workspaces:

          Query UDQ-110.06.24-16.18.09-00001 for workspace
             "testing with idname" (kdp)
          Query zDB2_040_GSTQXST for workspace
             "DSG QXST V520" (kdp)
          Query zDB2_040_GSTQXST:520 for workspace
             "DSG QXST V520" (kdp)
          Query zDB2_040_STATQXST:520 for workspace
             "QXST V520" (kdp)
          Query zDB2_040_STATQXST for workspace
             "QXST V520"

          These queries were obsolete resulting in -109 in
          exportWorkspaces.

Problem conclusion

PI74895 - KDPPZPRM PANEL IS NOT ACCESSIBLE VIA TAB NAVIGATION.
  Conclusion:
          Added tab -ALL- back to DSG DSNZPARM navigation.

PI93547 - Wrong label for DB2_System_States.Bytes_written_to_log
  Conclusion:
          Changed label "Bytes written to log (MB/s)" to
          "Bytes written to log" and changed the corresponding
          help to:
          The megabytes of data written to the active log data
          set. It was calculated by multiplying QJSTCIWR
          (label LOG CI WRITTEN (LOG1&2)) by 4096,
          then dividing the result by (1024 * 1024 * 2).
          This figure is valid for dual logging, if single
          logging is used, multiply the value shown by 2.

PI93936 - Query UDQ-110.06.24-16.18.09-00001 for workspace "
          testing with idname" (kdp) was not exported during
          tacmd exportworkspaces
  Conclusion:
          The obsolete queries and workspaces are removed from
          the workspaces presentation file.

Search Keywords:
< KDPPZPRM ALL QUERY UDQ GSTQXST STATQXST EXPORTWORKSPACES -109
BYTES WRITTEN TO LOG>

Temporary fix

Comments

APAR Information

APAR number
PI93547
Reported component name
OM XE DB2PE/PM
Reported component ID
5655OPE00
Reported release
530
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2018-02-08
Closed date
2018-04-26
Last modified date
2018-05-01

APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:

UI55476

Modules/Macros

   KDPATR   KDPBAR   KDPCAT   KDPDOC   KDPH0025
KDPJSTMS KDPJSTPS KDPJSTPW KDPMAP   KDPMSMAN KDPPZOTH KDPPZPRM
KDPPZTB2 KDPPZTB3 KDPVRTMS KO25KPI

Fix information

Fixed component name
OM XE DB2PE/PM
Fixed component ID
5655OPE00

Applicable component levels

R530 PSY UI55476
UP18/04/28 P F804

Fix is available

Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SSZJXP","label":"DB2 Tools for z\/OS"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"5.3.0","Line of Business":{"code":"LOB10","label":"Data and AI"}}]

Document Information

Modified date:
19 October 2022

Tips

PI93547: Attribute DB2_System_States.Bytes_written_to_log has incorrect label. MB/S is incorrect. Should be just MB

Direct links to fixes

Subscribe

APAR status

Closed as program error.

Error description

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

APAR Information

APAR number

Reported component name

Reported component ID

Reported release

Status

PE

HIPER

Special Attention

Submitted date

Closed date

Last modified date

APAR is sysrouted FROM one or more of the following:

APAR is sysrouted TO one or more of the following:

Modules/Macros

Fix information

Fixed component name

Fixed component ID

Applicable component levels

R530 PSY UI55476

Fix is available

Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.

Document Information

Share your feedback

Need support?