PM33760: SOME MESSAGES ARE NOT DEFINED IN THE MESSAGE MANUAL

APAR status

• Closed as documentation error.

Error description

• 1) Message KO2O1964I is not in the message manual. The message
  text and explanation is listed in the manual under message
  KO2O1963I. Message KO2O1963I in the manual should be changed to
  KO2O1964I.
  
  2) Messages KO2O1963E, KO2I0553E and KO2I0554E are not
  documented in the messages manual
  

Local fix

• Note Updated message(s) below:
  
  Message:
     KO2O1964I Backlevel Near-Term History data set(s)
     detected. Resetting.
  Explanation:
     Near-term history VSAM data sets from a previous
     version of Near-Term History Data Collector were
     found. These data sets are not compatible with
     the current Near-Term History Data Collector.
  System action:
     The near-term history VSAM data sets are cleared
     and the Near-Term History Data Collector will start.
  User response:
     None.
  
  
  Message:
     KO2O1963E OMEGAMON Server subtask PESERVER not active.
  Explanation:
     PESERVER subtask is not active. It may have been
     stopped with the command   /F <STC_Name>,P PESERVER
     or during initialization, the START PESERVER command
     was not executed or failed.
  System Action:
     Monitoring is not available
  Programmer or Operator Response:
     Start the PESERVER subtask using the command
     /F <STC_Name>,S PESERVER   Insure that message
     FPEV0000I appears during initialization.
  
  
  
  Message:
     KO2I0553E OINT Jobstep Program: pppppppp. OMPE Subsystem
     required
  Explanation:
     Program name 'pppppppp' is the name specified on
     EXEC statement of the STC JCL. OMPE Releases V420 and
     higher require that PGM=KO2ZTOBP is specified on the
     EXEC statement of the STC JCL statement.
  System Action:
     Started Task terminates.
  User Response:
     Specify PGM=KO2ZTOPB on the EXEC statement of the
     STC JCL statement
  
  
  Message:
     KO2I0554E HINT Jobstep Program: pppppppp. OMPE Subsystem
     required.
  Explanation:
     Program name 'pppppppp' is the name specified on
     EXEC statement of the STC JCL. OMPE Releases V420 and
     higher require that PGM=KO2ZTOBP is specified on the
     EXEC statement of the STC JCL statement.
  System Action:
     Started Task terminates.
  User Response:
     Specify PGM=KO2ZTOPB on the EXEC statement of the
     STC JCL statement
  

Problem summary

• Messages Manual updated:
  https://www-304.ibm.com/support/docview.wss?uid=swg27020983
  

Problem conclusion

• Messages Manual updated:
  https://www-304.ibm.com/support/docview.wss?uid=swg27020983
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels