II14251: TWS Z/OS 8.3 INSTALL - E37 ABEND (OUT OF SPACE) FOR HWSZ300.F3 RELFILE, ALSO NO DDDEF FOUND FOR SEQQ0023

APAR status

• Closed as canceled.

Error description

• There are several problems that cause the RECEIVE and APPLY jobs
  for TWSz 8.3.0 to fail. These can be corrected as follows:
  (1) For an E37 abend on HWSZ300.F3 file, increase the DSSPACE
  parameter from the value recommended in the PROGRAM DIRECTORY
  to a larger value (500,500,400).  The F3 RELFILE for HWSZ300 is
  about 6800 tracks and the largest file that can be allocated
  with a primary and secondary allocation of 400 tracks is 6400
  tracks.  DSSPACE is in the OPTIONs specifications.  The major
  portion of the additional space is occupied by SEQQMISC/AEQQMISC
  member EQQTEP, which is part of the new TWSz 8.3 TEP integration
  To change the value the following needs to be run:
  //SMPCNTL DD *
  SET BOUNDARY(GLOBAL)
  .
  UCLIN
  .
  REP OPTIONS(XXXXXX) /* CHANGE TO YOUR OPTIONS ENTRY NAME */
  DSSPACE(500,500,400) /* 400,400,400 TOO SMALL */
  DSPREFIX(XXXX.XXXX.V8R3M0) /*CHANGE to your DSPREFIX */
  NOPURGE
  NOREJECT
  SAVEMTS
  SAVESTS
  NUCID(1)
  PAGELEN(60)
  PEMAX(9999)
  RETRYDDN(ALL)
  .
  ENDUCL
  .
  After making this change the RECEIVE job EQQRECVE should run OK.
  
  (2) Some of the target and DLIB zone libraries are larger for
  8.3.0 than for 8.2.0. If the EQQALLOC member that is supplied
  with the 8.3 install is used, some libraries will have
  insufficient directory blocks and/or insufficient primary or
  secondary allocations. This will result in messages similar
  to the following one during the APPLY job (EQQAPPLE) or
  ACCEPT job (EQQACPTE):
  GIM40901E ** COPY PROCESSING TO THE SEQQCLIB LIBRARY FAILED FOR
  CLIST EQQATERM IN SYSMOD HWSZ300. THE RETURN CODE (08) EXCEEDED
  THE ALLOWABLE VALUE.
  To prevent these problems, use the following JCL for job
  EQQALLOC.
  The only changes are to the SPACE parameter for 18 of the files.
  NOTE: This JCL can also be downloaded from the following URL:
  http://www-1.ibm.com/support/docview.wss?uid=swg21252774
  as attached file eqqalloc.txt
  
  //EQQALLOC JOB (ACCT#),'TWS ALLOCATION'
  //* THIS JOB ALLOCATES TIVOLI WORKLOAD SCHEDULER FOR z/OS
  //* DISTRIBUTION AND TARGET LIBRARIES FOR BASE AND NLS FEATURES.
  //* BEFORE USING THIS JOB STEP, YOU WILL HAVE TO MAKE THE
  //* FOLLOWING MODIFICATIONS:
  //* 1) CHANGE "twsz" TO THE FIRST QUALIFIER TO BE USED FOR THE
  //*       DISTRIBUTION AND TARGET LIBRARIES.
  //* 2) CHANGE "v8r3m0" TO THE SECOND QUALIFIER TO BE USED FOR
  //*    DISTRIBUTION AND TARGET LIBRARIES.
  //* 3) CHANGE "tttt" TO THE VOLSER FOR THE TARGET LIBRARIES.
  //* 4) CHANGE "dddd" TO THE VOLSER FOR THE DISTRIBUTION
  //*    LIBRARIES.
  //*
  //*    IF YOU SPECIFY A VOLUME FOR ANY DATASET IN THIS JOB, YOU
  //*    MUST ALSO SPECIFY THE SAME VOLUME IN THE CORRESPONDING
  //*    DDDEF ENTRY IN THE DDDEF JOB, EQQDDDEF.
  //*
  //* 5) BY DEFAULT THIS JOB ALLOCATES LIBRARIES FOR THE
  //*    BASE AND THE ENGLISH FEATURE.
  //*    IF YOU WANT TO ALLOCATE LIBRARIES FOR AN NLS FEATURES
  //*    "UN-COMMENT" THE  ALLNLS STEP AND MODIFY THE "LAN=lan"
  //*    STATEMENT SETTING  lan  TO ONE OF THE FOLLOWING VALUES:
  //*    - ESP  FOR SPANISH  LANGUAGE
  //*    - JPN  FOR JAPANESE LANGUAGE
  //*    - DEU  FOR GERMAN   LANGUAGE
  //*    YOU NEED TO RUN THIS STEP FOR EACH LANGUAGE YOU WANT TO
  //*    INSTALL
  //*
  //* NOTES:
  //* ======
  //* THE JOB CONSIST OF 3 PROCS. THE STEPS ARE:
  //*
  //* 1) STEP ALLBASE: ALLOCATES DISTRIBUTION AND TARGET
  //*    LIBRARIES FOR THE BASE FEATURE
  //* 2) STEP ALLENG : ALLOCATES DISTRIBUTION AND TARGET
  //*    LIBRARIES FOR THE ENGLISH FEATURE
  //*
  //* 3) STEP ALLNLS : ALLOCATES DISTRIBUTION AND TARGET
  //* LIBRARIES FOR AN NLS FEATURE. THIS STEP "IS COMMENTED OUT"
  //* AT THE END OF THE JOB. IF YOU WANT TO ALLOCATE NLS LIBRARIES
  //*  REMOVE THE COMMENT FOR ALLNLS STEP AND SET THE "lan"
  //*  VARIABLE TO ONE OF THE FOLLOWING VALUES:
  //*    - ESP  FOR SPANISH  LANGUAGE
  //*    - JPN  FOR JAPANESE LANGUAGE
  //*    - DEU  FOR GERMAN   LANGUAGE
  //*
  //* THIS JOB WILL COMPLETE WITH A RETURN CODE 0.  YOU MUST
  //* CHECK ALLOCATION MESSAGES TO VERIFY THE DATA SETS ARE
  //* ALLOCATED AND CATALOGED AS EXPECTED.
  //*
  //ALLBASE  PROC  UNIT='SYSALLDA',
  //         DVOL=,IX1=,IX2=,TVOL=
  //*************************************************************
  //* ALLBASE ALLOCATES ALL LIBRARIES FOR THE BASE FEATURE
  //*************************************************************
  //BR14     EXEC  PGM=IEFBR14
  //AEQQMOD0 DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=U,LRECL=0,BLKSIZE=32760,
  //         DSNAME=&IX1..&IX2..AEQQMOD0,
  //         SPACE=(32760,(625,75,470))
  //AEQQHFS0 DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=VB,LRECL=30000,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..AEQQHFS0,
  //         SPACE=(TRK,(1110,47,60))
  //AEQQPNL0 DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..AEQQPNL0,
  //         SPACE=(32760,(40,200,10))
  //AEQQMSG0 DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..AEQQMSG0,
  //         SPACE=(32760,(500,60,110))
  //AEQQSKL0 DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..AEQQSKL0,
  //         SPACE=(32760,(8,5,12))
  //AEQQSAMP DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..AEQQSAMP,
  //         SPACE=(32760,(450,61,30))
  //AEQQMISC DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..AEQQMISC,
  //         SPACE=(32760,(26000,600,6))
  //AEQQDATA DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=VB,LRECL=6156,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..AEQQDATA,
  //         SPACE=(32760,(25,6,3))
  //AEQQTBL0 DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..AEQQTBL0,
  //         SPACE=(32760,(3,1,3))
  //AEQQMAC0 DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..AEQQMAC0,
  //         SPACE=(32760,(70,5,4))
  //AEQQCLIB DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..AEQQCLIB,
  //         SPACE=(32760,(100,7,5))
  //SEQQPNL0 DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&TVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..SEQQPNL0,
  //         SPACE=(32760,(40,200,10))
  //SEQQMSG0 DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&TVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..SEQQMSG0,
  //         SPACE=(32760,(500,60,110))
  //SEQQMAC0 DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&TVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..SEQQMAC0,
  //         SPACE=(32760,(70,5,4))
  //SEQQSKL0 DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&TVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..SEQQSKL0,
  //         SPACE=(32760,(8,5,12))
  //SEQQSAMP DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&TVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..SEQQSAMP,
  //         SPACE=(32760,(450,61,30))
  //SEQQMISC DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&TVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..SEQQMISC,
  //         SPACE=(32760,(26000,600,6))
  //SEQQDATA DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&TVOL,
  //         RECFM=VB,LRECL=6156,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..SEQQDATA,
  //         SPACE=(32760,(25,6,3))
  //SEQQTBL0 DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&TVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..SEQQTBL0,
  //         SPACE=(32760,(3,3,3))
  //SEQQCLIB DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&TVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..SEQQCLIB,
  //         SPACE=(32760,(100,7,5))
  //SEQQLMD0 DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&TVOL,
  //         RECFM=U,LRECL=0,BLKSIZE=32760,
  //         DSNAME=&IX1..&IX2..SEQQLMD0,
  //         SPACE=(32760,(1110,100,120))
  //END      PEND
  //*
  //ALLENG   PROC  UNIT='SYSALLDA',
  //         DVOL=,IX1=,IX2=,TVOL=
  //**************************************************************
  //* ALLENG ALLOCATES ALL LIBRARIES FOR THE ENGLISH FEATURE
  //**************************************************************
  //BR14     EXEC  PGM=IEFBR14
  //AEQQPENU DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..AEQQPENU,
  //         SPACE=(32760,(1400,60,61))
  //SEQQPENU DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&TVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..SEQQPENU,
  //         SPACE=(32760,(1400,60,61))
  //END      PEND
  //*
  //ALLNLS   PROC  UNIT='SYSALLDA',
  //         DVOL=,IX1=,IX2=,TVOL=,LAN=
  //**************************************************************
  //* ALLNLS ALLOCATES ALL LIBRARIES FOR THE NLS FEATURES
  //**************************************************************
  //BR14     EXEC  PGM=IEFBR14
  //AEQQPLAN DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..AEQQP&LAN,
  //         SPACE=(32760,(205,18,61)) )
  //AEQQMLAN DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&DVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..AEQQM&LAN,
  //         SPACE=(32760,(64,6,40))
  //SEQQPLAN DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&TVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..SEQQP&LAN,
  //         SPACE=(32760,(205,60,61)) )
  //SEQQMLAN DD    DISP=(,CATLG),UNIT=&UNIT,VOL=SER=&TVOL,
  //         RECFM=FB,LRECL=80,BLKSIZE=0,
  //         DSNAME=&IX1..&IX2..SEQQM&LAN,
  //         SPACE=(32760,(64,60,40))
  //END      PEND
  //**************************************************************
  //* END OF INSTREAM PROCEDURES. START OF REAL JOB JCL. REMOVE
  //* OR COMMENT THE STATEMENT BELOW ACCORDING TO YOUR NEEDS
  //* CUSTOMIZE lower case variables ACCORDING TO YOU INSTALLATION
  //* NEEDS
  //**************************************************************
  //ALLBASE  EXEC  ALLBASE,DVOL=dddd,TVOL=tttt,IX1=twsz,IX2=v8r3m0
  //ALLENG   EXEC  ALLENG,DVOL=dddd,TVOL=tttt,IX1=twsz,IX2=v8r3m0
  //*ALLNLS  EXEC  ALLNLS,DVOL=dddd,TVOL=tttt,IX1=twsz,IX2=v8r3m0,
  //*           LAN=lan
  
  (3) If you attempt to install TWS z/OS 8.3.0 into an SMP/E zone
  where an older version of TWS z/OS or OPC was installed, you may
  get the following error on the APPLY job:
  
  GIM54502E ** ALLOCATION FAILED FOR SEQQ0023 BECAUSE THERE IS NO
  DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN TARGET ZONE
  MVSTZN.
  GIM28303E ** ALLOCATION FAILED FOR SEQQ0023, WHICH IS REQUIRED
  IN ORDER TO PROCESS SYSMOD HWSZ300.
  GIM22601I APPLY PROCESSING FAILED FOR SYSMOD HWSZ300.
  This is caused because SEQQ0023 is not used in the 8.3.0 release
  but was used in earlier releases of TWS.
  To avoid this problem, prior to running the EQQDDDEF job
  provided with the TWS z/OS 8.3 installation
  (step 6.1.8 Create DDDEF Entries in the Program Directory),
  the old version of TWS or OPC should be removed, using a
  USERMOD similar to the following (which removes TWS z/OS 8.2):
  //SMPPTFIN DD *
  ++ FUNCTION(DELFUNC).
  ++ VER(Z038) DELETE(HWSZ200 JWSZ2A4 JWSZ2C0 JWSZ201 JWSZ202
  JWSZ203).
  /*
  //SMPCNTL DD *
  SET BDY(GLOBAL).
  RECEIVE S(DELFUNC).
  SET BDY(MVSTZN).
  APPLY CHECK S(DELFUNC).
  APPLY S(DELFUNC).
  SET BDY(MVSDZN).
  ACCEPT CHECK S(DELFUNC).
  ACCEPT S(DELFUNC).
  UCLIN.
  DEL SYSMOD(DELFUNC).
  DEL SYSMOD(HWSZ200).
  DEL SYSMOD(JWSZ2A4).
  DEL SYSMOD(JWSZ2C0).
  DEL SYSMOD(JWSZ201).
  DEL SYSMOD(JWSZ202).
  DEL SYSMOD(JWSZ203).
  ENDUCL.
  SET BDY(MVSTZN).
  UCLIN.
  DEL SYSMOD(DELFUNC).
  DEL SYSMOD(HWSZ200).
  DEL SYSMOD(JWSZ2A4).
  DEL SYSMOD(JWSZ2C0).
  DEL SYSMOD(JWSZ201).
  DEL SYSMOD(JWSZ202).
  DEL SYSMOD(JWSZ203).
  ENDUCL.
  /*
  After running this USERMOD, the 8.3 EQQDDDEF job may be run,
  followed by the APPLY (step 6.1.9 Perform SMP/E APPLY in the
  Program Directory).
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

• INFOAPAR TWSZOS830 install
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels