II02170: CSP/AD AND CSP/AE COMMON PROBLEMS AND USER ERRORS

APAR status

• Closed as canceled.

Error description

• THIS APAR HAS BEEN CREATED TO INFORM CUSTOMERS OF COMMON
  PROBLEMS AND USER ERRORS USING CSP.
  
      COMPID       RELEASE       OPERATING SYSTEM     FMID/CLC
    566882401     R429  RD29          VSE               D29
                  R212                 VM
                  R104                MVS             HFY2104
    566882501     R428  RD28          VSE               D28
                  R212                 VM
                  R104                MVS             HFZ2104
    566881301     R339  RC39          VSE               C39
                  R311                 VM
                  R104                MVS             HFY3104
                  R362  RC62          VSE               C62
                  R320                 VM
                  R202                MVS             HFY3202
                  R462  RD62          VSE               D62
                  R324                 VM
                  R205                MVS             HFY3205
                  R464  RD40          VSE               D40
                  R325                 VM
                  R207                MVS             HFY3207
                  R466  RD66          VSE               D66
                  R326                 VM
                  R212                MVS             HFY3212
    566881401     R340  RC40          VSE               C40
                  R311                 VM
                  R104                MVS             HFZ3104
                  R363  RC63          VSE               C63
                  R320                 VM
                  R202                MVS             HFZ3202
                  R463  RD63          VSE               D63
                  R324                 VM
                  R205                MVS             HFZ3205
                  RD65  D65           VSE               D65
                  R325                 VM
                  R207                MVS             HFZ3207
                  RD67  D67           VSE               D67
                  R326                 VM
                  R212                MVS             HFZ3212
  ****************************************************************
  MSGEZE00519P RC800 (EZE00519P) OR MSGEZE00513P RC216 (EZE00513P)
  WHILE GENERATING CSP/AD MEMBER UNDER CICS.
  THIS ERROR WILL OCCUR IF THE FCT ENTRY FOR THE ALF DOES
  NOT HAVE DELETE SPECIFIED IN THE SERVREQ PARAMETER.
  ****************************************************************
  MSGEZE00892A EZE00892A OR MSGEZE00888A EZE00888A OR MSGEZE00479A
  EZE00479A DURING IMPORT OF CSP DATA SET CONTAINING ESF MEMBERS.
  THIS ERROR WILL OCCUR IF THE DATA SET IS NOT DEFINED AS A
  FIXED LENGTH SERIAL FILE WITH 80-BYTE RECORDS.
  ****************************************************************
      SQLCODE302   SQLCODE -302
  THE ABOVE SQL CODE IS ISSUED WHEN USING A JCL TO PREPARE
  STATIC MODULES WHERE THE 'NOALIGN' PARAMETER HAS BEEN REMOVED
  FROM VARIOUS ASSEMBLER STEPS.  ALSO, THE 'LET', 'RENT', AND
  'REUS' PARAMETERS WERE DELETED FROM THE LINKEDIT STEP.  WHEN
  THE CUSTOMER USED THE SAMPLE JCL PROVIDED WITH CSP, IN THIS
  CASE, DCBPREP , THE ERROR WAS RESOLVED.
  ****************************************************************
  MSGMSL0001I RC102 WHEN RUNNING THE MSLCONV UTILITY IN CSP 3.3.
  THE RC102 IN THE OUTPUT FILE IS NORMAL. IT MEANS THAT THE END OF
  THE INPUT FILE WAS REACHED.  THE BATCH JOB ITSELF WILL HAVE A
  0 RETURN CODE (JOB COMPLETED SUCCESSFULLY) WHEN THE 102 RETURN
  CODE IS SEEN IN THE MSLCONV OUTPUT LOG.
  ****************************************************************
  MSDMSITP141T OPERATION EXCEPTION AT '02296C' IN ROUTINE LKED
  WHEN RUNNING THE $ADV3COR EXEC TO APPLY CSP/AD MAINTENANCE.
  THIS MESSAGE CAN OCCUR FOR VM/SP5 CUSTOMERS AT PUT8904, SERVICE
  LEVEL 519.  THE CUSTOMER NEEDS TO APPLY VM APAR VM41041.
  ADDITIONAL SEARCH TERMS: MSGITP141T ITP141T
  ****************************************************************
  AN ABEND0C4, ABENDASRA IN MODULE HECPMS80 UNDER TSO MAY OCCUR
  IF CSP/AD AND CSP/AE ARE NOT LINKED IN THE SAME MODE.
  MAY ALSO SEE A MSGFZE10021S THAT POINTS TO DCBPMS00
  TO CORRECT, USER SHOULD RESUBMIT JOBS DCAIJXA AND DCBIJXA,
  AND VERIFY THAT THE SAME AMODE IS SPECIFIED IN BOTH JOBS AND
  THE UPDATES ARE MADE TO THE CORRECT LIBRARIES.
  ****************************************************************
  MSGFZE10009S INSUFFICIENT STORAGE AVAILABLE ISSUED WHEN
  EXECUTING CSP/AE UNDER VM.  THIS PROBLEM CAN OCCUR IF THE
  LEVELS OF CMS AND CP DO NOT MATCH.  TO FIND OUT IF THIS IS
  THE CASE ISSUE THE COMMANDS Q CMSLEVEL AND Q CPLEVEL.  THE
  LEVELS MUST MATCH TO EXECUTE CSP V3R3 BECAUSE OF THE SUPPORT
  ADDED FOR VM/XA.
  ADDITIONAL SYMPTOMS: MSDMSLIO029E INVALID OPTION IN
                       ORGIN FIELD WHEN CALLING NON-CSP
                       PROGRAM.
  ****************************************************************
  A RC81A INDICATES THAT THE ALF IS NOT OPENED,ENABLED AND
  INITIALIZED.
  ****************************************************************
  MSGALFU0005P UNABLE TO CONNECT TO SECONDARY ALF
  4288I FILE SECNALF OPEN ERROR X'94' (148)
  THESE ERROR MESSAGES ARE ISSUED WHEN USING THE TRANSFER
  FACILITY OF ALFUTIL WHEN THE PRIMARY AND SECONDARY ALFS ARE
  NOT IN THE SAME CATALOGS.  UNDER VM, THE PRIMARY AND SECONDARY
  ALFS MUST RESIDE IN THE SAME VSAM CATALOG.
  IF THE VSAM CATALOG SPANS MULTIPLE MINI-DISKS, THEN AN
  OPEN ERROR WITH A RETURN CODE OF X'22' WILL OCCUR ON
  SECNALF.  THIS ERROR CANNOT BE RESOLVED UNTIL THE
  VM APAR VM32490 IS RESOVLED.  THUS THE PRIMARY AND
  SECONDARY ALFS MUST RESIDE IN THE SAME CATALOG ON THE
  SAME MINI-DISK.
  ****************************************************************
  MSGEZE00512P RC102 ISSUED WHILE GENERATING UNDER CSP/AD.
  MESSAGE WILL BE ISSUED IF THE DCAWORK FILE IS NOT DEFINED
  WITH THE CORRECT KEY LENGTH.  REFER TO SYSTEM ADMINISTRATION
  MANUAL TO SEE HOW THIS FILE SHOULD BE DEFINED.  IF THE OBJECT
  OF THE GENERATE IS AN APPLICATION, THE $A FILE WILL BE LISTED
  AS THE DATASET THE EOF CONDITION OCCURED ON.
  ****************************************************************
  VM/IS CUSTOMERS UPGRADING TO A NEWER VERSION OF CSP MAY
  EXPERIENCE THE FOLLOWING PROBLEM WHEN RUNNING THE L5668814 EXEC.
  MSGIDC3009I RC240 RESON CODE IGGOCLFF-8.
  IF THE CUSTOMER IS GOING TO (RE)FORMAT THE VSAM DISKS 502 & 503,
  THEN THEY MUST CHANGE THE DISK SIZES FOR THESE DISKS TO MATCH
  THE SIZES SPECIFIED IN THE PROGRAM DIRECTORY.  IF THE CUSTOMER
  IS NOT GOING TO (RE)FORMAT THE VSAM DISKS, THEY MAY LEAVE THE
  DISK SIZES AS THEY ARE CURRENTLY DEFINED AND WILL NOT HAVE THIS
  PROBLEM.
  ****************************************************************
  IN TSO THE DCAWORK FILE SHOULD BE DEFINED WITH SHR(3,3) OR ONLY
  ONE TSO USER CAN OPERATE AT A TIME.
  IN TSO  THE EZEPRINT TO FILE DATA SET SHOULD BE DEFINED AS
  DISP=MOD OR YOU WILL NOT BE ABLE TO PRINT TO EZEPRINT
  ****************************************************************
  ABENDS23E OR RC804 OR MSGDZG00022P IS THE RESULT OF GETTING A
  NEW COPY OF FZEIPL IN THE SYSTEM AND ATTEMPTING TO USE ANY
  USER LINKED TRANSACTION THAT HAS NOT BEEN RELINKED.  IF A NEW
  COPY OF FZEIPL IS USED ALL USER LINKED TRANSACTIONS MUST BE
  RELINKED.
  ****************************************************************
  VARIOUS ERRORS UNDER OS. THIS IS BECAUSE WHEN USING CONCATENATED
  DATASETS THE CUSTOMER DID NOT CONCATINATE THEM IN SIZE ORDER.
  THE LARGEST MUST BE FIRST AND THEN THE NEXT LARGEST AND SO ON.
  ****************************************************************
  COMMON CSP USER ERRORS
  07/27/87
  NOTE THAT FZEDAOC IS NOT LINKED CORRECTLY.  IT SHOULD BE
  LINKED AMODE(31) RMODE(24)
  ****************************************************************
  IF YOU HAVE AN ISQL TRANSACTION THAT HANGS, REVIEW
  SQL/DS APAR PP24137.
  ****************************************************************
  IF CICS HANGS ON A CSP PRINT, REVIEW CICS DOCUMENTATION
  APAR PP54335.
  ****************************************************************
  VM USERS ONLY
  MSG4228I FILE TRGTALF OPEN ERROR X'B4'
  THESE ERROR MESSAGES WILL BE ISSUED WHEN A CSP USER TRIES TO
  LIST THE CONTENTS OF AN ALF AND THE FOLLOWING CONDITIONS
  EXIST:
    1)  VM APAR VM30882 IS NOT APPLIED
    2)  THE ALF IS NOT ON THE FIRST R/W DOS DISK IN THE SEARCH
        ORDER.
  IN ORDER TO PREVENT THE ABOVE ERROR SITUATION, THE CSP USER
  SHOULD VERIFY THAT VM30882 IS APPLIED TO THEIR VM SYSTEM AND
  THAT THE ALF IS ON THE FIRST R/W DOS DISK.
  ****************************************************************
  PLEASE NOTE THAT CSP IS NOW PART OF THE FORMAL PTF PROCESS.
  MAINTENANCE SHOULD NOW BE ORDERED IN ACCORDANCE WITH PSP
  BUCKETS FOR YOUR CSP OPERATING SYSTEM.  EG, CHOOSE UPGRADE
  'CSP', 'CSP320', OR 'CSPNNN' AND APPROPRIATE SUBSET.
  PREVENTIVE MAINTENANCE SHOULD NO LONGER BE ORDERED FROM
  LEVEL 2.
  ****************************************************************
  WHEN INSTALLING CSP ON VSE, USER MAY EXPERIENCE ABENDASCF AND
  ABENDASRA IN DCBINIT WHEN TRYING TO RUN IVP, EXECUTING ALFUTIL.
  MSGFZE10021S RC803 MAY ALSO ACCOMPANY THE ABEND.  IN THIS CASE
  THERE WAS NOT ENOUGH STORAGE ALLOCATED FOR CSP.  TO DETERMINE
  STORAGE REQUIREMENTS, USERS SHOULD REFER TO THE SYSTEM
  ADMINISTRATION MANUAL (SH23-0503-2) PAGES 70 TO 75.  ALSO
  CSP PROGRAM DIRECTORY SUGGESTS INCREASING THE STORAGE BY 800 K.
  ****************************************************************
  MSGDFH0506 ( DFH0506 , MSDFH0506 , SHORT ON STORAGE , SOS ,
  CICS UNDER STRESS ) OCCURS WHEN TRYING TO USE CSP/AD ( CSP AD )
  TEST OR DEBUG FACILITY.  THIS SYMPTOM CAN BE CAUSED BY SEVERAL
  DIFFERENT SETUP PROBLEMS:
  1. THE OVERALL REGION SIZE WHERE THE TEST FACILITY IS BEING RUN
  MAY NEED TO BE INCREASED.  THE CSP TEST FACILITY IS A MAJOR
  CORE USER COMPARED TO OTHER CSP FACILITIES.  SEE PAGE 70 OF THE
  'CSP/AD AND CSP/AE SYSTEM ADMINISTRATION' GUIDE FOR THE
  FORMULA USED TO ESTIMATE THE VIRTUAL STORAGE REQUIREMENT FOR
  THE TEST FACILITY.
  2. THE SYSTEM MAY ALSO NEED TO BE TUNED WITH THE ASSISTANCE
  OF AN OPSE OR SE.  SOME THINGS TO CHECK ARE: THE MINIMUM SETTING
   FOR THE SCS OPERANDSHOULD BE 6 TIMES THE CICS PGSIZE (FROM THE
  DFHSIT),  THE DSA SIZE MAY NEED TO BE INCREASED, THE DSA COULD
  BE FRAGMENTED.
  ****************************************************************
  SHORT ON STORAGE CONDITION CAN ALSO OCCUR WHEN THE DFHPPT
  ENTRIES FOR CSP MODULES OTHER THAN THE DCBKIXNN AND ALFUTIL
  PROGRAMS CONTAIN THE RELOAD=YES PARAMETER.  THIS PARAMETER
  SHOULD ONLY BE INCLUDED WITH THE DCBKIXNN AND ALFUTIL
  PROGRAMS.
  ****************************************************************
  MSGEZE00494P RC00000217 OCCURS WHEN PRINTING, IE. WHEN TRYING
  TO PRINT A MEMBER.  ADDITIONAL KEYWORDS: RC000217 , RC0000217 ,
  MSEZE00494P , EZE494P , RC217 , RC0217 , RC00217 , RC000000217
  THIS RETURN CODE, 217, IS USUALLY ISSUED WHEN THE DATA THAT
  THE APPLICATION IS TRYING TO PRINT HAS A LENGTH WHICH IS
  LONGER THAN THE LENGTH THAT THE VIRTUAL PRINTER SUPPORTS. IF
  THE VIRTUAL PRINTER DOES NOT SUPPORT A LINE LENGTH OF 204,
  WHICH IS THE CSP FILE OR LINE LENGTH, THEN IT CAN BE RE-
  DEFINED AS A D/T3800 PRINTER WHICH DOES.  IF THE PRINTER IS NOT
  REALLY A D/T3800, THIS SHOULD STILL WORK BECAUSE VM AND/OR RSCS
  HANDLE THE CONVERSION OF THE PRINT OUTPUT FOR THE CORRECT DEVICE
  PLEASE SEE PAGE 112 OF CP COMMAND REFERENCE (SC19-6211-4) FOR
  THE SYNTAX OF THE DEFINE PRINTER COMMAND.  PLEASE ALSO BE SURE
  TO DETACH THE VIRTUAL PRINTER BEFORE REDEFINING IT.
  ****************************************************************
  ADDITIONAL KEYWORDS : 566881301 , 566881401 & CSP .
  ****************************************************************
  MSGDZG00011P WHEN EXECUTING A CSP/AE APPLICATION THAT IS USING
  A DB2 STATIC MODULE.  THIS MESSAGE IS USUALLY ISSUED WHEN THE
  USER FAILS TO INCLUDE THE STATIC MODULE ENTRY IN THE CICS PPT.
  THE USER SHOULD VERIFY THAT ALL OF THE STEPS IN THE CSP SYSTEM
  ADMINISTRATION MANUAL, SH23-0503-1, UNDER STATIC EXECUTION MODE
  ON CICS/OS/VS HAVE BEEN PERFORMED.
  THE RC803, USUALLY INDCATES THE MISSING PPT ENTRY.
  IF RC802 IS ISSUED, THIS INDICATES THE CICS REGION
  IS TOO SMALL.  THE MODULE EZGSQL80 MAY BE ASSOCIATED
  WITH THIS ERROR MESSAGE.
  IF A NEGATIVE GETMAIN VALUE CAN BE SEEN UNDER EDF, THEN
  THE MSGDZG00011P IS ISSUED BECAUSE THE FIRST CSECT IN THE
  STATIC MODULE IS NOT THE ONE BUILT DURING THE LINK EDIT.
  MAKE SURE THERE IS AN ORDER CARD NAMING THE MEMBER BEING
  BUILT IN THE LINK EDIT STEP THAT MAKES IT THE FIRST CSECT.
  MSGDZG00078A MAY BE ISSUED INSTEAD.
  ****************************************************************
  MSG4228I 'FILE XXXX OPEN ERROR X'6E' (110)' AND MESSAGES
  MSGDZG00019P 'ERROR ON CONNECT FOR XXXX RC=000005A0 ,
  MSGDZG00021P 'ERROR OCCURED IN ALFULN/LMSCAN' ,
  MSGDZG00021P 'ERROR OCCURED IN ALFULN/ALLIST' ,
  MSGDZG00031P 'CALL TO ALFULN FAILED' , ARE ISSUED WHEN TRYING
  TO LIST THE CONTENTS OF AN EMPTY ALF.  THIS OCCURS BECAUSE CSP
  ATTEMPTS TO OPEN A VSAM DATASET FOR INPUT, BUT THE DATASET IS
  EMPTY.  THE CSP APPLICATION IS NO LONGER IN CONTROL, SO AN
  ALFUXXXX MESSAGE IS NOT ISSUED.  IF THESE MESSAGES ARE RECEIVED,
   THE ALF IS EMPTY.  THERE IS NOT A CSP PROBLEM.
  ****************************************************************
  MSDMSITP143T ON RETURN TO CSP FROM PROFS OR OTHER PRODUCTS WHEN
  INVOKING CSP AND THE OTHER PRODUCT FROM THE SAME EXEC UNDER VM.
  IN PROF FOR EXAMPLE: INVOKING PROFS AFTER RUNNING CSP, THEN
  RECEIVE AN OPERATION EXCEPTION AFTER LEAVING PROFS.  TO RESOLVE
  THE PROBLEM, ADD AN EXCOS TO THE LINE IN THE EXEC THAT ISSUES
  THE CALL TO CSP (EX: EXECOS EXEC XSPE).  THE EXECOS CAUSES A
  CLEANUP OF THE OS OR VSAM ENVIRONMENT AFTER CSP IS FINISHED
  RUNNING AND BEFORE PROFS BEGINS.  THIS IS ONLY NEEDED WHEN 2 OR
  MORE PROGRAMS ARE INVOKED FROM THE SAME EXEC, BECAUSE THIS CLEAN
  UP HAPPENS AUTOMATICALLY AFTER YOU ENTER A COMMAND AT THE
  TERMINAL.
  ****************************************************************
  MSGIEC130I DCATEJD DD STATEMENT MISSING AND
  MSGIEC130I DCATEJU DD STATEMENT MISSING MAY BE ENCOUNTERED WHEN
  USING THE SAMPLE XSPD CLIST SUPPLIED WITH CSP/320. IN TUTORIAL
  SECTION OF THE XSPD CLIST SHOULD BE CODED AS FOLLOWS:
  /* TUTORIALS   */
  IF &NLS=C | &NLS=J | &NSL=K | &NLS=U THEN +
     DO
       /* ALLOCATE TUTORIALS FOR DBCS LANGUAGES */
       ALLOC FI(DCATEJ&NLS) DA('&CSPNAME..FZETUTOR.&NLS') SHR
       ALLOC FI(DCATES&NLS) DA('&CSPNAME..FZATUTOR.U') SHR
     END
  ELSE +
     ALLOC FI(DCATES&NLS) DA('CSPNAME..FZETUTOR.&NLS') SHR
  *********************************************************
  APAR PL26357 - DB2 MSGDSNH104I IS RECEIVED DURING PRECOMPILE
  OF A DB2 STATIC ACCESS MODULE BECAUSE AN "IN PREDICATE OF A
  WHERE" CLAUSE CONTAINS NULL INDICATORS.  THIS DOES NOT OCCUR
  UNDER CSP/AD BECAUSE CSP/AD RUNS IN DYNAMIC MODE.
  THIS APAR, CLOSED PRS (PERMANENT RESTRICTION), IS IN
  CONJUNCTION WITH DB2 APAR PL25355 WHICH IS CLOSED SUG, AS
  DB2 WILL CONSIDER SUPPORT OF THE NULL INDICATOR IN A
  POSSIBLE FUTURE RELEASE.
  IT IS SUGGESTED THAT RATHER THAN USE THE 'IN' PREDICATE,
  (I.E. A IN(V1, V2, V3)), THAT THE "OR" FUNCTION BE USED
  (I.E. A=V1 OR A=V2 OR A=V3).                    89/06/08 RES
  ****************************************************************
  VM USERS ONLY.  SQLCODE551 RECEIVED WHEN RUNNING A CSP
  APPLICATION FROM CMS LOAD FILES ( ALF=C ) AND USING EXTENDED
  DYNAMIC ACCESS TO SQL.  THE ACCESS MODULE MUST HAVE BEEN
  CREATED (EITHER AT APPLICATION GENERATION TIME OR WITH ALFUTIL)
  PRIOR TO CREATING THE CMS LOAD FILES WITH ALFUTIL.  IF THE
  ACCESS MODULE HAS NOT BEEN CREATED, THERE WILL BE NO $B FILE IN
  
  THE ALF.  IF THE $B FILE IS NOT IN THE ALF WHEN THE CMS LOAD
  FILES ARE CREATED, THE APPLICATION WILL ASSUME THAT IT IS TO
  RUN WITH DYNAMIC ACCESS TO SQL.  THIS IS DOCUMENTED IN THE
  CSP SYSTEM ADMINISTRATION MANUAL.
  ****************************************************************
  MSDMSREX475E ERROR 40 RUNNING $ADV3COR EXEC LINE 400,
  INCORRECT CALL TO ROUTINE.  THIS MESSAGE IS CAUSED BECAUSE
  THE CSPSERV EXEC IS SHIPPED IN THE CSP/AE PTF.  THIS PTF
  MUST BE INSTALLED FIRST THE FIRST TIME MAINTENANCE IS
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

• WILL UPDATE AS NEEDED
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels