PTF Cover Letter
PTF ( Program Temporary Fixes ) Cover letter
MQM400 CUMULATIVE #60212 FIX PACK (WMQ v6.0 COMMANDS & OPS)
Pre/Co-Requisite PTF / Fix List
REQ LICENSED PTF/FIX LEVEL
TYPE PROGRAM REL NUMBER MIN/MAX OPTION
---- -------- --- ------- ------- ------
PRE 5724H72 600 SI47907 NONE 0000
CO 5724H72 600 SI47899 NONE 0000
DIST 5724L26 600 SI47908 NONE 0000
NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels. This PTF may be a prerequisite
for future PTFs. By applying this PTF you authorize and agree to the
foregoing.
This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF. You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.
SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.
The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.
APAR Error Description / Circumvention
-----------------------------------------------
Collective service MDV 6.0.2.12 for WebSphere MQ v6.0
CORRECTION FOR APAR SE53206 :
-----------------------------
Collective service MDV 6.0.2.12 for WebSphere MQ v6.0
- which contains fixes for all the problems listed below: .
. .
SE50050 - WMQ COMMANDS LEAK HEAPSPACE .
SE48404 - WRKMQMMSG DOES NOT SHOW THE CORRECT LOCAL TIME .
SE47804 - MQM400 QM.INI HAS CONNECTION: DEFAULTBINDTYPE=ISOLATED
AND THE W RKMQMCHST IS GETTING AMQ9522 545284114 .
XECL_E_INVALID_PARAM .
SE46973 - DSPMQMQ SYSTEM.AUTH.DATA.QUEUE FAILS WITH AMQ8135 .
SE39267 - FASTPATH CHANNELS FAIL IN JOB AMQRCMLA AMQ5520 AMQZIF
SE38523.1 - IN CERTAIN ENVIRONMENTS, AMQZXMA0 CAN TAKE LARGE
.
AMOUNTS OF CPU WHEN STARTING THE QUEUE MANAGER VIA AN.
AUTOSTART JOB .
SE38195 - WMQ V6 & V7 USING TRIGGERED TEMPORARY DYNAMIC QUEUES .
RESULTS IN AN INCORRECT QUEUE NAME BEING RETURNED TO .
THE TRIGGERED APPL. .
IZ97372 - THE WEBSPHERE MQ QUEUE MANAGER PARAMETER CLWLMRUC DOES
NOT RESTRICT THE NUMBER OF OUTBOUND CHANNELS .
CORRECTLY. .
IZ95735 - THE QUEUE MANAGER STOPS PROCESSING TRANSACTIONS. .
APPLICATIONS APPEAR TO HANG. AN FDC RECORD WITH PROBE.
ID AT071015 IS WRITTEN. .
IZ95182 - THE API EXIT'S USERID FIELD IN THE MQAXC CONTEXT IS .
BLANK OR INCORRECT WHEN THE WEBSPHERE MQ CLIENT SENDS.
AN EMPTY USERNAME .
IZ89701.1 - POTENTIAL LOOP WHEN A QUEUE MANAGER IS BEING ADDED
TO.
A CLUSTER WHILE TRACING IS ACTIVE. .
IV28699 - WEBSPHERE MQ MESSAGES DELIVERED OUT OF SEQUENCE .
IV27926 - CORRECTION TO WEBSPHERE MQ DOCUMENTATION: QUEUE STATS.
ARE ONLY RECORDED FOR MQI OBJECT HANDLES OPENED WHILE.
STATS ARE ENABLED .
IV27148 - ERRONEOUS AMQ7469, "TRANSACTION ROLLED BACK MESSAGE" .
WRITTEN TO WEBSPHERE MQ V6 QUEUE MANAGER ERROR LOGS. .
IV25768 - REFRESH SECURITY TYPE(SSL) PRODUCES PROBE CO258001 AND
RM499200 FDCS BOTH WITH MAJOR ERROR CODE .
RRCE_CHANNEL_IN_USE .
IV25693 - FAILURE TO DELIVER COD/COA REPORT TO AN ALIASED QUEUE.
MANAGER RC=2189 MQRC_CLUSTER_RESOLUTION_ERROR .
IV25645 - PROBE AT120030 FDC WHEN TRANSACTION EXPIRY IS .
CONFIGURED AND WEBSPHERE MQ IS ACTING AS A TRANSACTION
MANAGER .
IV25030 - WEBSPHERE MQ CLUSTER FAILS, POSSIBLY GENERATING FDC .
FILES WITH PROBE IDS RM296000 OR OTHER .
RRCE_REPOSITORY_ERROR .
IV24197 - QUEUE MANAGER JUST STARTED ENDS WITH ERRORS AMQ9508 .
AND AMQ8004 .
IV23149 - QUEUE MANAGER UNRESPONSIVE FDCS WITH PROBE A0218001 .
PRODUCED. ALSO MAY BE PROBE AO175001 .
IV22349 - THE DLTMQM COMMAND RUNS OUT OF FILE DESCRIPTORS, E.G..
A PROBE XC076010 FDC FROM DLTMQM. .
IV22043 - FOLLOWING RESTART OF A CRASHED QUEUE MANAGER, A QUEUE.
MAY BE REPORTED AS DAMAGED. .
IV20526 - NEW MESSAGE FOR ERROR LOG WHEN A VALID CLUSRCVR .
CHANNEL UPDATE HAS NOT BEEN RECEIVED .
IV18138 - IF MACHINE IS BUSY, MQOPEN OR MQPUT1 OF CLUSTER QUEUE.
CAN FAIL WITH 2085 MQRC_UNKNOWN_OBJECT_NAME .
IV17960 - MESSAGE BUILDUP ON SYSTEM.CHANNEL.SYNC.QUEUE RESULTING
IN SLOW PERFORMANCE FOR WEBSPHERE MQ VERSION 6. .
IV15374 - WEBSPHERE MQ CLUSTER QUEUES BECOME INVISIBLE TO OTHER.
QUEUE MANAGERS WHERE MULTIPLE CLUSTERS ARE IN USE .
IV14110 - STATUS AND MONITORING "TIME" ATTRIBUTES, SUCH AS .
XQTIME, MAY SHOW INCORRECT OR EVEN NEGATIVE VALUES .
IV12713 - HIGH CPU IN THE WEBSPHERE MQ AMQRRMFA PROCESS WHEN .
ADDING A QUEUE MANAGER TO A CLUSTER WHILE TRACING IS .
ACTIVE .
IV11979 - WEBSPHERE MQ SEGMENTED MESSAGES IGNORED INTERMITTENTLY
DURING MQGET CALL .
IV11671 - JAVA.LANG.NULLPOINTEREXCEPTION THROWN IN WEBSPHERE MQ.
V6 CLASSES FOR JMS WHEN CALLING THE METHOD .
SETTARGETCLIENT .
IV09923 - WEBSPHERE MQ CHANNEL NOT RESTARTED AFTER REMOTE QUEUE.
MANAGER RESTARTED. FDC CREATED WITH PROBE ID RM409000.
IV09400 - IN A CLUSTER WITH MORE THAN TWO FULL REPOSITORIES THE.
SYSTEM.CLUSTER.COMMAND.QUEUE CAN FILL UP. .
IV09149 - A CORRUPT CHANNEL SYNCHRONIZATION FILE MAY CAUSE .
CHANNEL CODE TO ENTER AN INFINITE LOOP WITHOUT AN .
OBVIOUS ERROR REPORT .
IV05727 - ACTIVATING A BACKUP QUEUE MANAGER USING "STRMQM -A" .
MAY FAIL WITH ERROR AMQ7017: LOG NOT AVAILABLE .
IV03956 - AMQ9511 ERROR MESSAGE APPEARED, BUT THIS DID NOT .
ACCURATELY DESCRIBE THE PROBLEM. .
IV01112 - QUEUE MANAGER ATTRIBUTE DEFXMITQ INCORRECTLY ALLOWS .
THE VALUE "SYSTEM.CLUSTER.TRANSMIT.QUEUE" TO BE SET .
IV00816 - WEBSPHERE MQ V6 MEMORY LEAK FROM PROCESS AMQZMUR0 .
IC83386 - DMPMQLOG COMMAND FAILS DUE TO MISSING LOGS .
IC81583 - WEBSPHERE MQ CLUSTER QUEUES BECOME INVISIBLE TO OTHER.
QUEUE MANAGERS WHERE MULTIPLE CLUSTERS ARE IN USE .
IC81525 - WEBSPHERE MQ PING CHANNEL COMMAND FAILS WITH ERROR .
AMQ9640 IF SSLPEER IS SPECIFIED ON CHANNEL .
CIRCUMVENTION FOR APAR SE53206 :
--------------------------------
None.
Activation Instructions
None.
Special Instructions
Whether or not you have experienced this problem, it is recommended
that
you apply this PTF, following the instructions given below.
This PTF, for WebSphere MQ for iSeries (5724H7206) Version 6 Release 0,
Modification 0 is of type *IMMED.
***********************************************************************
*
*** IMPORTANT
***
*** ---------
***
*** Before applying this PTF, you MUST stop ALL Queue Manager
***
*** activity and FULLY quiesce WebSphere MQ, by following the steps
***
*** shown below. Please note, if you do not clear up shared memory
***
*** (see step (10)) then your Queue Manager may not restart.
***
***********************************************************************
*
1. Use F12 (Cancel) to return to your initial MENU.
Note: If you have WebSphere MQ Commands (CMDMQM) as your initial
menu, change the initial menu in your user profile, sign off
and sign on again.
2. Warn all users that you are going to shut down WebSphere MQ,
and that they should not restart their Queue Managers or their MQI
applications until all PTFs have been loaded and applied.
3. Quiesce all queue managers in a controlled manner:
... ENDMQM MQMNAME(*ALL) OPTION(*CNTRLD) ENDCCTJOB(*YES)
... RCDMQMIMG(*YES) TIMEOUT(15)
NB: Using RCDMQMIMG(*YES) may cause the shut down of some queue
managers
to take a very long time. If this is the case then do step 3a.
3a. From a different sign-on session, issue command:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*CNTRLD)
ENDCCTJOB(*NO)
followed by:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*IMMED)
ENDCCTJOB(*YES)
4. If step 3 does NOT log AMQ7A60 ("All queue managers have been
quiesced") then repeat the shut down WebSphere MQ using command:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(15)
5. Shut down the default WebSphere MQ subsystem (QMQM) and also any
user-defined WebSphere MQ subsystems:
... ENDSBS SBS(QMQM) OPTION(*IMMED)
6. Sign off, then sign on again.
7. If you have any testfix PTFs which have been applied on top of your
current Fix Pack (CSD) PTFs, then use RMVPTF to remove these
testfixes.
8. Load and apply this PTF - using the OS/400 menu of PTF commands.
9. Load and apply all other WebSphere MQ PTFs which are requisites for
this PTF. A full list of the PTFs which comprise a Fix Pack can be
seen at http:
//www-306.ibm.com/software/integration/mqfamily/support/summary/
10. If steps 3 or 4 did NOT log AMQ7A60 ("All queue managers have been
quiesced"), you MUST clear WebSphere MQ shared memory by repeating:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(05)
11. Restart the WebSphere MQ subsystem:
... STRSBS SBSD(QMQM/QMQM)
12. Restart one or more Queue Managers, using either the STRMQM command
or option 14 from the WRKMQM panel.
All users who were actively using WebSphere MQ before it was quiesced
should sign off and sign on again before restarting their Queue
Managers or restarting their MQI applications.
********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI40641 :
=================================================
Whether or not you have experienced this problem, it is recommended
that
you apply this PTF, following the instructions given below.
This PTF, for WebSphere MQ for iSeries (5724H7206) Version 6 Release 0,
is of type *IMMED.
***********************************************************************
*
*** IMPORTANT
***
*** ---------
***
*** Before applying this PTF, you MUST stop ALL Queue Manager
***
*** activity and FULLY quiesce WebSphere MQ, by following the steps
***
*** shown below. Please note, if you do not clear up shared memory
***
*** (see step (10)) then your Queue Manager may not restart.
***
***********************************************************************
*
1. Use F12 (Cancel) to return to your initial MENU.
Note: If you have WebSphere MQ Commands (CMDMQM) as your initial
menu, change the initial menu in your user profile, sign off
and sign on again.
2. Warn all users that you are going to shut down WebSphere MQ,
and that they should not restart their Queue Managers or their MQI
applications until all PTFs have been loaded and applied.
3. Quiesce all queue managers in a controlled manner:
... ENDMQM MQMNAME(*ALL) OPTION(*CNTRLD) ENDCCTJOB(*YES)
... RCDMQMIMG(*YES) TIMEOUT(15)
NB: Using RCDMQMIMG(*YES) may cause the shut down of some queue
managers
to take a very long time. If this is the case then do step 3a.
3a. From a different sign-on session, issue command:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*CNTRLD)
ENDCCTJOB(*NO)
followed by:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*IMMED)
ENDCCTJOB(*YES)
4. If step 3 does NOT log AMQ7A60 ("All queue managers have been
quiesced") then repeat the shut down WebSphere MQ using command:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(15)
5. Shut down the default WebSphere MQ subsystem (QMQM) and also any
user-defined WebSphere MQ subsystems:
... ENDSBS SBS(QMQM) OPTION(*IMMED)
6. Sign off, then sign on again.
7. If you have any testfix PTFs which have been applied on top of your
current Fix Pack (CSD) PTFs, then use RMVPTF to remove these
testfixes.
8. Load and apply this PTF - using the OS/400 menu of PTF commands.
9. Load and apply all other WebSphere MQ PTFs which are requisites for
this PTF. A full list of the PTFs which comprise a Fix Pack can be
seen at http:
//www-306.ibm.com/software/integration/mqfamily/support/summary/
10. If steps 3 or 4 did NOT log AMQ7A60 ("All queue managers have been
quiesced"), you MUST clear WebSphere MQ shared memory by repeating:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(05)
11. Restart the WebSphere MQ subsystem:
... STRSBS SBSD(QMQM/QMQM)
12. Restart one or more Queue Managers, using either the STRMQM command
or option 14 from the WRKMQM panel.
All users who were actively using WebSphere MQ before it was quiesced
should sign off and sign on again before restarting their Queue
Managers or restarting their MQI applications.
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI31813 :
=================================================
Whether or not you have experienced this problem, it is recommended
that
you apply this PTF, following the instructions given below.
This PTF, for WebSphere MQ for iSeries (5724H7206) Version 6 Release 0,
is of type *IMMED.
***********************************************************************
*
*** IMPORTANT
***
*** ---------
***
*** Before applying this PTF, you MUST stop ALL Queue Manager
***
*** activity and FULLY quiesce WebSphere MQ, by following the steps
***
*** shown below. Please note, if you do not clear up shared memory
***
*** (see step (10)) then your Queue Manager may not restart.
***
***********************************************************************
*
1. Use F12 (Cancel) to return to your initial MENU.
Note: If you have WebSphere MQ Commands (CMDMQM) as your initial
menu, change the initial menu in your user profile, sign off
and sign on again.
2. Warn all users that you are going to shut down WebSphere MQ,
and that they should not restart their Queue Managers or their MQI
applications until all PTFs have been loaded and applied.
3. Quiesce all queue managers in a controlled manner:
... ENDMQM MQMNAME(*ALL) OPTION(*CNTRLD) ENDCCTJOB(*YES)
... RCDMQMIMG(*YES) TIMEOUT(15)
NB: Using RCDMQMIMG(*YES) may cause the shut down of some queue
managers
to take a very long time. If this is the case then do step 3a.
3a. From a different sign-on session, issue command:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*CNTRLD)
ENDCCTJOB(*NO)
followed by:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*IMMED)
ENDCCTJOB(*YES)
4. If step 3 does NOT log AMQ7A60 ("All queue managers have been
quiesced") then repeat the shut down WebSphere MQ using command:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(15)
5. Shut down the default WebSphere MQ subsystem (QMQM) and also any
user-defined WebSphere MQ subsystems:
... ENDSBS SBS(QMQM) OPTION(*IMMED)
6. Sign off, then sign on again.
7. If you have any testfix PTFs which have been applied on top of your
current Fix Pack (CSD) PTFs, then use RMVPTF to remove these
testfixes.
8. Load and apply this PTF - using the OS/400 menu of PTF commands.
9. Load and apply all other WebSphere MQ PTFs which are requisites for
this PTF. A full list of the PTFs which comprise a Fix Pack can be
seen at http:
//www-306.ibm.com/software/integration/mqfamily/support/summary/
10. If steps 3 or 4 did NOT log AMQ7A60 ("All queue managers have been
quiesced"), you MUST clear WebSphere MQ shared memory by repeating:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(05)
11. Restart the WebSphere MQ subsystem:
... STRSBS SBSD(QMQM/QMQM)
12. Restart one or more Queue Managers, using either the STRMQM command
or option 14 from the WRKMQM panel.
All users who were actively using WebSphere MQ before it was quiesced
should sign off and sign on again before restarting their Queue
Managers or restarting their MQI applications.
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI28694 :
=================================================
you apply this PTF, following the instructions given below.
is of type *IMMED.
1. Use F12 (Cancel) to return to your initial MENU.
Note: If you have WebSphere MQ Commands (CMDMQM) as your initial
and sign on again.
2. Warn all users that you are going to shut down WebSphere MQ,
applications until all PTFs have been loaded and applied.
3. Quiesce all queue managers in a controlled manner:
... ENDMQM MQMNAME(*ALL) OPTION(*CNTRLD) ENDCCTJOB(*YES)
... RCDMQMIMG(*YES) TIMEOUT(15)
to take a very long time. If this is the case then do step 3a.
3a. From a different sign-on session, issue command:
followed by:
4. If step 3 does NOT log AMQ7A60 ("All queue managers have been
quiesced") then repeat the shut down WebSphere MQ using command:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(15)
5. Shut down the default WebSphere MQ subsystem (QMQM) and also any
user-defined WebSphere MQ subsystems:
... ENDSBS SBS(QMQM) OPTION(*IMMED)
6. Sign off, then sign on again.
current Fix Pack (CSD) PTFs, then use RMVPTF to remove these
testfixes.
8. Load and apply this PTF - using the OS/400 menu of PTF commands.
seen at http:
//www-306.ibm.com/software/integration/mqfamily/support/summary/
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(05)
11. Restart the WebSphere MQ subsystem:
... STRSBS SBSD(QMQM/QMQM)
or option 14 from the WRKMQM panel.
should sign off and sign on again before restarting their Queue
Managers or restarting their MQI applications.
Default Instructions
THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.
Supersedes
PTF/FIX NO(S). APAR TITLE LINE
-------------- ------------------------------------------------------------
SI43321 MQM400 CUMULATIVE #60211 FIX PACK (WMQ v6.0 COMMANDS & OPS)
SI40641 MQM400 CUMULATIVE #60210 FIX PACK (WMQ v6.0 COMMANDS & OPS)
SI38635 MQM400 CUMULATIVE #60209 FIX PACK (WMQ v6.0 COMMANDS & OPS)
SI36108 MQM400 CUMULATIVE #60208 FIX PACK (WMQ v6.0 COMMANDS & OPS)
SI35511 MQM400 CUMULATIVE #60207 FIX PACK (WMQ v6.0 COMMANDS & OPS)
SI33840 MQM400 CUMULATIVE #60206 FIX PACK (WMQ v6.0 COMMANDS & OPS)
SI33840 MQM400 MDV V6.0.2.5 (MQRC) TESTFIX FOR IZ35844.
SI33840 MQM400 3506(ELOCKED) ENDS QUEUE MANAGER ABRUPTLY
SI33840 AMQ7460,7462 LOGGED MORE FREQUENTLY THAN USUAL TO AMQALMPX
SI33840 MQM400 RCDMQMIMG DSPJRNDTA(*YES) DOES NOT RETURN AMQ7460/AMQ
SI33840 MQM400-MSGAMQ9915 IF QMGR STARTED BEFORE TCP ACTIVE FOR CLU
SI33840 MSGAMQ8210-HLIC-94XXMISC CHANNEL PUTAUT *CTX FAILS
SI33840 MQM400 STRMQM FAILS WITH RM185002 IN RRMINITREPOS
SI33280 MQM400 MDV V6.0.2.4 TESTFIX FOR SE34580
SI33280 MQM400 MDV V6.0.2.4 TESTFIX FOR SE34587 AND SE34588 for mqq
SI33280 MQM400 MDV V6.0.2.4 TESTFIX FOR SE34587 AND SE34588 for mqq
SI33280 MQM400 FIX PACK 6024 TESTFIX FOR SE33722
SI33280 MQM400 FIX PACK 6024 TESTFIX FOR SE33722
SI33280 MQM400 CUMULATIVE MDV 60205 (WMQ v6.0 COMMANDS & OPS)
SI33280 MQM400 VALIDATEAUTH=NO DOES NOT MAINTAIN ERROR LOG PERMISSIO
SI33280 MQM400 MQOA CRTMQMPRC/CHGMQMPRC FAILS TO SAVE VALUES WITH *
SI33280 OSP-PERFM MQM400-DELAY WHEN USING SSL WITH MQ V6
SI33280 MQM400 CANNOT SUCCESSFULLY REMOVE A QUEUE MANAGER FROM A CLU
SI33280 MQM400 IT IS NOT POSSIBLE TO CREATE TERASPACE ENABLED C++ PR
SI33280 MQM400 *PUBLIC AUTHORITY CHANGE FOR CONTENT IN DIRECTORY /QI
SI33280 MQM400-INCORROUT MQ 6.0.2.3 MAY FAIL TO START
SI33280 MQM400-INCORROUT MQM400 56-BIT EXPORT CIPHERSPECS DO NOT WOR
SI33280 MQM400 STRMQM FAILS WITH PROBE AL008000 ON OS400 WITH OS VER
SI33280 MQM400 DSPMQMSTS AND AMQ7460, AMQ7462 IN THE QUEUE MANAGER E
SI31813 MQM400 CUMULATIVE MDV 60204 (WMQ v6.0 COMMANDS & OPS)
SI31813 MQM400 MDV V6.0.2.2 (MQRC) TESTFIX FOR IZ08829
SI31813 MQM400 MDV V6.0.2.2 (MQCS) TESTFIX FOR IZ07206
SI31813 MQM400 MDV V6.0.2.2 (MQRC) TESTFIX FOR SE30754
SI31813 MQM400 MDV V6.0.2.3 (MQRC) TESTFIX FOR IZ08829
SI31813 MQM400 MDV V6.0.2.3 (MQRC) TESTFIX FOR SE30754, IZ08829, SE
SI31813 MQM400 MDV V6.0.2.3 (MQCS) TESTFIX FOR IZ07206
SI31813 MQM400- MSGMCH3402 AMQRRMFA ABEND DURING QUEUE MANAGER START
SI31813 MQM400 DSPMQMLSR OUTPUT(*PRINT) DOES NOT OUTPUT SPOOLFILE
SI31813 MQM400 RUNMQCHL JOBLOG DO NOT CONTAIN ANY USEFUL ERROR MESSA
SI31813 MQM400-INCORROUT WRKMQMQ - FILTERING THE TYPE OF QUEUE - F11
SI31813 MQM400 - V6 INSTALLATION GRANTS OWNERSHIP OF OBJECTS TO QDFT
SI31813 MQM400 WMQ CHANNEL PROBLEMS WITH HRTBTINT > 999999
SI31813 OSP-MSGAMQ9507 MQM400-AMQ9507 FOR *SDR CHANNEL AFTER V6
SI31813 MQM400 UNABLE TO USE CLRMQMQ COMMAND WITHOUT ALTUSR AUTHORIT
SI31813 MQM400 Inconsistencies noticed for the SSLPEER attribute of
SI31813 MQM400 - WMQ LISTENER JOBS STARTED BEFORE QUEUE MANAGER STAR
SI31813 MQM400-RC545284153-MSGAMQ5011 WMQ V6 STRMQM FAILS TO START Q
SI31813 MQM400 ILE RPG COPY BOOK CONTAINS DUPLICATE ENTRIES
SI27288 MQM400 CUMULATIVE MDV 60203 (WMQ v6.0 COMMANDS & OPS)
SI27288 MQM400 TESTFIX FOR APAR IZ01402 on MQv60201
SI27288 MQM400 TESTFIX FOR APAR IZ01402 on MQv60201
SI27288 MQM400 MDV V6.0.2.2 TESTFIX FOR IY99050 AND SE28955
SI27288 MQM400 MDV V6.0.2.2 TESTFIX FOR IY99050 AND SE28955
SI27288 MQM400 MDV V6.0.2.2r TESTFIX FOR SE30262
SI27288 MQM400 MDV V6.0.2.2 (MQRC) TESTFIX FOR SE30262
SI27288 MQM400 MCAUSER *PUBLIC NOT RECOGNIZED FULLY EVEN AFTER
SI27288 MQM400-QUEUE MANAGER WITH PENDING TRANSACTION FAILS TO
SI27288 MQM400 LODPTF OF FIXPACK 6.0.2.2 FAILS WITH AMQ6903
SI27288 MQM400 : Queue manager migration failed with MCH0601 and
SI27288 MQM400 : RCDMQMIMG DOES NOT LOG MESSAGES AMQ7460 AND AMQ7462
SI27288 MQM400- COMMAND SERVER FOR A CLUSTERED QUEUE MANAGER FAILING
SI27288 MQM400 AMQCRSTA JOB DOES NOT RUN UNDER USER-DEFINED
SI27288 MQM400 STRMQM FAILS WITH AMQ7432 ARCE_LOG_RECD_NOT_FOUND
SI27288 MQM400 CHGMQMPRC OR CRTMQMPRC FAILS TO RECORD VALUES OF
SI27288 MQM400 AMQ6903 RECEIVED ON INSTALL OF FP 6.0.2.1
SI27288 MQM400 STRMQM HANGS WITH X '00000D49'
SI27288 MQM400 WRKMQM OPTION 22 RECEIVES MSG CPF3C53
SI28694 MQM400 CUMULATIVE MDV 60202 (WMQ v6.0 COMMANDS & OPS)
SI28694 MQM400 PERFORMANCE DEGRADATION AFTER APPLYING WMQ FIX PACK
SI27286 MQM400 TESTFIX FOR APAR SE28113 on RefreshPack 6.0.2.0
SI27286 MQM400 CUMULATIVE MDV 60202 (WMQ v6.0 COMMANDS & OPS)
SI27286 MQM400 TESTFIX FOR APAR SE28113 on RefreshPack 6.0.2.1
SI27286 MQM400 RSTLICPGM HALTS WITH AMQ6233
SI27286 MQM400 -RUNMQBRK CAN SUFFER MCH3601 AS SEEN IN FDC XY353001
SI27286 MQM400 ENDMQM *ALL GENERATES FDC WITH PROBE ID XY043007
SI27286 OSP JOBS NOT ENDED AFTER SHUTDOWN OF MQ V6 QUEUE MANAGER
SI27286 MQM400 - MSGAMQ5522 AND MSGCPF1151 GENERATED ON STRMQM FOR Q
SI27286 MQM400 CRTMQM AND STRMQM OF QUEUE MANAGER RECEIVES AF089070
SI27286 MQM400 MCAUSER *PUBLIC NOT RECOGNIZED IN CHGMQMCHL OR CRTMQM
SI27286 MQM400 DEAD LETTER QUEUE HANDLER FAILS WITH CPF0001 AMQ8750
SI27286 MQM400 AMQ9207 CO052000 CCITCPRECEIVE RRCE_BAD_DATA_RECEIVED
SI27286 MQM400 PNGMQMCHL FAILS WITH MSGMCH3601, IF USER PROFILE LOCA
SI27286 MQM400 TESTFIX FOR APAR IZ01272 ON WMQv60201
SI25716 MQM400 CLUSTER CHANNELS WOULD NOT START AFTER AN UPGRADE TO
SI25716 MQM400 CUMULATIVE MDV 60201 (WMQ v6.0 COMMANDS & OPS)
SI25716 MQM400 SHIP NEW PTF EXIT PROGRAM AMQIPTFX
SI25716 MQM400 CHECKING WMQ IS ACTIVE DURING UNINSTALL HAS BEEN
SI25716 MQM400 RCRMQMOBJ FAILS TO RECOVER THE DAMAGED OBJECTS ON RCR
SI25716 MQM400-WRKMQM REMAINS INPUT INHIBITED WHEN ENDUSER HAS PRIMA
SI25716 OSP-F/AMQALMRX-MSGMCH0601-T/AMQALMRX STRMQM OF A V6 QUEUE
SI25716 MQM400-OWNERSHIP OF ERROR LOGS INCORRECT AFTER THE BATCH
SI25716 MQM400 - STRMQMLSR WITH IP ADDRESS SPECIFIED FAILES AMQ9248
SI25716 MQM400 WRKMQM OPTION 22 RESULTS IN CPF3C53
SI25716 MQM400 DUPLICATE SSWC ENTRIES IN CMQCFG RPGLE COPY FILE. THE
SI25716 OSP-MSGAMQ8135-PAR AMQ8135 NOT AUTHORIZED WHEN USING *ALLOBJ
SI25716 MQM400-ENDMQM MQMNAME(*ALL) FAILS WITH ERROR NUNBER 3027
SI25716 MQM400 TESTFIX FOR APAR SE28140 on RefreshPack 6.0.2.0
SI25716 MQM400-EXCEPTION IN FUNCTION RFXADDCLQMGR DURING QUEUE
SI24238 MQM400-AMQ8059 RC2292 (UNKNOWN ENTITY) ON CRTMQM
SI24238 MQM400 ABNORMAL END OF MQ APPLICATION PROGRAM MAY HANG QUEUE
SI24238 MQM400 MCH0601 AFTER MULTIPLE STRMQMCHL
SI24238 MQM400 TESTFIX FOR APAR IY84934 on FixPack 6.0.1.1
SI24238 MQM400 RFRMQMAUT REMOVES GROUP MEMBERS AUTHORITIES
SI24238 MQM400 TESTFIX FOR APAR IY81945 on FixPack 6.0.1.1
SI24238 MQM400 TESTFIX FOR APAR IY81945 on FixPack 6.0.1.1
SI24238 MQM400 CUMULATIVE MDV 60200 (WMQ v6.0 COMMANDS & OPS)
SI21854 MQM400 UNABLE TO RESTART QUEUE MANAGER. AMQ8041 ON STRMQM
SI21854 MQM400-MSGAMQ9620 UNEXPECTED SSL ERRORON CALL TO
SI21854 MQM400 CUMULATIVE #60101 FIX PACK (WMQ v6.0 COMMANDS & OPS)
SI21854 MQM400-Queue manager unexpectedly abends
SI21854 MQM400-Queue manager unexpectedly abends
SI21854 MQM400 CRTMQM OR STRMQM RECIEVES MSGAMQ7155 MSGAMQ7128
SI21854 OSP MQ V6.0 - INTERNAL WEBSPHERE MQ ERRORS - AMQ6109, AMQ611
SI21854 MQM400-MSGAMQ8146 QUEUE MANAGER NOT AVAILABLE EXECUTING
SI21854 MQM400 - STRMQMMQSC MQMNAME(*DFT) GENERATES MSGMCH3601 AND
SI21854 OSP QMNAME CAN'T BE DEFINED IN MQ CLNTCONN CHANNEL WITH CL
SI21854 MQM400-MSGMCH3601 exception occurs in LoadExit when MQCD
SI21854 MQM400 AGENT JOBS ARE NOT BEING ENDED AFTER FDC PROBE ZL0000
SI17347 MQM400 CUMULATIVE MDV 6.0.1.0 (WMQ v6.0 COMMANDS & OPS)
SI17347 MQM400 - VERIFYING MQ V6 USING CHKPRDOPT RETURNS ERROR
Summary Information
System.............................. | i |
Models.............................. | |
Release............................. | V6R0M0 |
Licensed Program............... | 5724H72 |
APAR Fixed.......................... | View details for APAR SE53206 |
Superseded by:...................... | |
Recompile........................... | N |
Library............................. | QMQM |
MRI Feature ........................ | NONE |
Cum Level........................... |
IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.
Document Information
Modified date:
10 December 2012