IBM Support

SI32590 - OSP Enable XSM global mirror

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

OSP Enable XSM global mirror


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED      PTF/FIX  LEVEL

TYPE PROGRAM  REL  NUMBER   MIN/MAX  OPTION
---- -------- ---  -------  -------  ------
NONE



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
XSM Global Mirroring is not enabled.

CORRECTION FOR APAR SE34555 :
-----------------------------
The operating system has been changed to enable the new
function.

CIRCUMVENTION FOR APAR SE34555 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE34556 :
-----------------------------------------------
Add cluster support to cross site mirroring to allow global

mirroring.

CORRECTION FOR APAR SE34556 :
-----------------------------
Add cluster support to cross site mirroring to allow global

mirroring.

CIRCUMVENTION FOR APAR SE34556 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI31600 :
=================================================

In order to fix the problems described by this PTF on all nodes in the

cluster, the PTF must be applied on all nodes in the cluster.

However,the entire cluster does not have to be ended to do this.  One

node at a time can be ended, the PTF applied, and the node restarted to

join the cluster.



Note, you must end Cluster Resource Services on the node, apply the

PTF,and then restart Cluster Resource Services before the fix is

available.



To determine if Cluster Resource Services is active on your system, do

a WRKACTJOB from the command line of your system and look for two

system jobs (QCSTCTL and QCSTCRGM).  If either of these jobs exist,

Cluster Resource Services must be ended on this system and you must

sign off all sessions where Cluster Resource Services APIs were used

before the PTF can be applied.  Cluster Resource Services is started

through the Start Cluster Node API.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI31128 :
=================================================

If clustering is active on the node, end clustering on the node before
applying the PTF using the appropriate cluster interface.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI30927 :
=================================================

In order to fix the problems described by this PTF on all nodes in the
cluster, the PTF must be applied on all nodes in the cluster.  However,
the entire cluster does not have to be ended to do this.  One node at a
time can be ended, the PTF applied, and the node restarted to join the
cluster.

Note, you must end Cluster Resource Services on the node, apply the
PTF, and then restart Cluster Resource Services before the fix is
available.

To determine if Cluster Resource Services is active on your system, do
a WRKACTJOB from the command line of your system.  Under the QSYSWRK
subsystem look for two jobs (QCSTCTL and QCSTCRGM).  If either of these
jobs exist, Cluster Resource Services must be ended on this system and
you must sign off all sessions where Cluster Resource Services APIs
were used before the PTF can be applied.  Cluster Resource Services is
started through the Start Cluster Node API.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI30895 :
=================================================

End clustering on the node using the appropriate interface before
applying this PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI30426 :
=================================================

In order to fix the problems described by this PTF on all nodes in the
cluster, the PTF must be applied on all nodes in the cluster.  However,
the entire cluster does not have to be ended to do this.  One node at a
time can be ended, the PTF applied, and the node restarted to join the
cluster.

Note, you must end Cluster Resource Services on the node, apply the
PTF,and then restart Cluster Resource Services before the fix is
available.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI29412 :
=================================================

End the cluster node first using your cluster management interfaces.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI29213 :
=================================================

Follow the special instructions below for PTF SI28829.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI32058      OSP-INCORROUT Unabe to use device domain data
   SI32056      OSP-INCORROUT CHGCRGPRI fails for metro mirror
   SI31760      OSP-MSGCPF9D8D QYASSDMO define ASP IO fails
   SI31701      OSP-OTHER-MSGCPFBA4C CALL TO QYASSDMP API RESULTS IN MSGCPFB
   SI31694      OSP-DISK-OTHER-THREADS-LOOP QCSTCTL JOB HUNG IN YASP
   SI31600      OSP-INCORROUT Incorrect data may be merged
   SI31600      OSP-INCORROUT Non-IASP reserved resource name may be deleted
   SI31600      OSP-INCORROUT  Device CRG may fail switchover
   SI31600      OSP-MSGCPFBBB1 Device CRG goes InDoubt on STRCLUNOD
   SI31600      OSP-MSGCPFBBA6 Changing a device CRG device entry to add/cha
   SI31600      OSP-INCORROUT Inactive node incorrectly identified as part o
   SI31600      OSP-MSGCPFBB99 CRG job fails to start with CPFBB99 RC 34 on
   SI31600      OSP-INCORROUT CRG hung while backing out after a failed swit
   SI31600      OSP-INCORROUT-MSGMCH3601 F/QCSTCRGM
   SI31280      OSP-MSGCPF3C55 CHGCRGPRI fails
   SI31207      OSP-INCORROUT Incorrect CRG status for metro mirror
   SI31175      OSP-MSGCPF9D8D reported for xsm.log
   SI31128      OSP-INCORROUT Multiple site nodes for metro mirror
   SI30928      OSP-MSGCPF9801 Dasd Management Operation Fails
   SI30927      OSP-INCORROUT CHGCRG producing CPFBB80 RC 26
   SI30895      OSP-WAIT STRCLUNOD hangs
   SI30813      OSP-INCORROUT STRASPSSN incorrectly allowed
   SI30798      OSP-INCORROUT QYASSDMO option Reset ASP IO fails
   SI30751      OSP-INCORROUT CHGCRGPRI fails for metro mirror
   SI30729      OSP-MSGCPFBB5B Incorrect resource name in message
   SI30697      OSP-INCORROUT CHGCRG fails with XSM configured
   SI30616      OSP-INCORROUT QYASSDMO option Define ASP IO fails
   SI30426      OSP-INCORROUT Switching failure has hardware on wrong node
   SI30250      OSP INCORROUT - ENDCLUNOD may result in false partition
   SI30250      OSP-INCORROUT Dataport IP addresses incorrectly removed
   SI29264      OSP-INCORROUT Incorrect behavior of device domain data
   SI29742      RCHLTSC1 - Cluster switchover does not complete successfully
   SI29640      OSP-INCORROUT Cluster event messages not always sent
   SI29412      OSP-INCORROUT CPFBB60, RC11 Switchover may fail
   SI29412      OSP INCORROUT - During CHGCRG, site primary node forcibly ta
   SI29143      OSP INCORROUT - Peer CRG hangs during failover if the CRG ob
   SI29213      UNPRED SUSPECT CODE GENERATION DURING PTF BUILD
   SI28829      OSP-INCORROUT RMVCLUNODE loops on a 2 node cluster

Summary Information

System..............................System i
Models..............................
Release.............................V6R1M0
Licensed Program...............5761SS1
APAR Fixed..........................SE34555
SE34556
Superseded by:......................View fix details for PTF SI59103
Recompile...........................N
Library.............................QSYS
MRI Feature ........................NONE
Cum Level...........................C8365610


System i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG15V","label":"PTF Cover Letters - OS\/400 General"},"Component":"","ARM Category":[],"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"V6R1M0","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG16A","label":"PTF Cover Letters - i5\/OS V6R1 environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"V6R1M0","Edition":"","Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
22 September 2008