IBM Support

SI56380 - MQM400 CUMULATIVE #70113 FIX PACK (WMQ v7.0.1 COMMANDS & OPS

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

MQM400 CUMULATIVE #70113 FIX PACK (WMQ v7.0.1 COMMANDS & OPS


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED      PTF/FIX  LEVEL

TYPE PROGRAM  REL  NUMBER   MIN/MAX  OPTION
---- -------- ---  -------  -------  ------
PRE  5724H72  701  SI56390   NONE     0000
CO   5724H72  701  SI56381   NONE     0000
DIST 5724L26  701  SI56391   NONE     0000
DIST 5724L26  701  SI52659   NONE     0000



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
Collective service MDV 7.0.1.13 for WebSphere MQ v7.0.1

Details of problems fixed for the WMQ server product (5724H72)
are included in APAR SE61244.

CORRECTION FOR APAR SE61244 :
-----------------------------
Collective service delivery for the set of PTFs in Fix Pack 7  .
- which contains fixes for all the problems listed below:      .
.                                                              .
IV59316 - A NULL POINTER EXCEPTION OCCURRED WHEN A WEBSPHERE MQ.
JMS APPLICATION ATTEMPTED TO RETRIEVE AN EVENT/PCF   .
MESSAGE.                                             .
IV53923 - WMQ V7: DEFPRTY IS IGNORED WHEN USING QUEUE ALIAS WITH
TARGET TYPE TOPIC.                                   .
IV52557 - THE QUEUE MANAGER IN IMMEDIATE MODE                  .
IV46858 - API "AFTER CONNECT" EXIT CAN TRIGGER UNEXPECTED      .
AMQ7216 ERROR MESSAGES IF AN MQ CONNECTION ATTEMPT   .
FAILS.                                               .
IV40268 - AMQ9636: 'SSL DISTINGUISHED NAME DOES NOT MATCH PEER .
NAME' ERROR WHEN USING SSL/TLS CHANNELS WITH         .
MULTI-INSTANCE QUEUE MANAGERS.                       .

CIRCUMVENTION FOR APAR SE61244 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


Whether or not you have experienced this problem, it is recommended
that
you apply this PTF, following the instructions given below.

This PTF, for WebSphere MQ for iSeries (5724H7206) Version 7 Release 0,
Modification 1 is of type *IMMED.

***********************************************************************
*
***                           IMPORTANT
***
***                           ---------
***
***  Before applying this PTF, you MUST stop ALL Queue Manager
***
***  activity and FULLY quiesce WebSphere MQ, by following the steps
***
***  shown below. Please note, if you do not clear up shared memory
***
***  (see step (10)) then your Queue Manager may not restart.
***
***********************************************************************
*

1. Use F12 (Cancel) to return to your initial MENU.

Note: If you have WebSphere MQ Commands (CMDMQM) as your initial
menu, change the initial menu in your user profile, sign off
and sign on again.

2. Warn all users that you are going to shut down WebSphere MQ,
and that they should not restart their Queue Managers or their MQI
applications until all PTFs have been loaded and applied.

3. Quiesce all queue managers in a controlled manner:
... ENDMQM MQMNAME(*ALL) OPTION(*CNTRLD) ENDCCTJOB(*YES)
... RCDMQMIMG(*YES) TIMEOUT(15)

NB: Using RCDMQMIMG(*YES) may cause the shut down of some queue
managers
to take a very long time. If this is the case then do step 3a.

3a. From a different sign-on session, issue command:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*CNTRLD)
ENDCCTJOB(*NO)
followed by:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*IMMED)
ENDCCTJOB(*YES)

4. If step 3 does NOT log AMQ7A60 ("All queue managers have been
quiesced") then repeat the shut down WebSphere MQ using command:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(15)

5. Shut down the default WebSphere MQ subsystem (QMQM) and also any
user-defined WebSphere MQ subsystems:
... ENDSBS SBS(QMQM) OPTION(*IMMED)

6. Sign off, then sign on again.

7. If you have any testfix PTFs which have been applied on top of your
current Fix Pack (CSD) PTFs, then use RMVPTF to remove these
testfixes.

8. Load and apply this PTF - using the OS/400 menu of PTF commands.

9. Load and apply all other WebSphere MQ PTFs which are requisites for
this PTF. A full list of the PTFs which comprise a Fix Pack can be
seen at http:
//www-306.ibm.com/software/integration/mqfamily/support/summary/

10. If steps 3 or 4 did NOT log AMQ7A60 ("All queue managers have been
quiesced"), you MUST clear WebSphere MQ shared memory by repeating:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(05)

11. Restart the WebSphere MQ subsystem:
... STRSBS SBSD(QMQM/QMQM)

12. Restart one or more Queue Managers, using either the STRMQM command
or option 14 from the WRKMQM panel.

All users who were actively using WebSphere MQ before it was quiesced
should sign off and sign on again before restarting their Queue
Managers or restarting their MQI applications.

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI40549 :
=================================================

Whether or not you have experienced this problem, it is recommended
that
you apply this PTF, following the instructions given below.

This PTF, for WebSphere MQ for iSeries (5724H7226) Version 7 Release 0,
Modification 1 is of type *IMMED.

***********************************************************************
*
***                           IMPORTANT
***
***                           ---------
***
***  Before applying this PTF, you MUST stop ALL Queue Manager
***
***  activity and FULLY quiesce WebSphere MQ, by following the steps
***
***  shown below. Please note, if you do not clear up shared memory
***
***  (see step (10)) then your Queue Manager may not restart.
***
***********************************************************************
*

1. Use F12 (Cancel) to return to your initial MENU.

Note: If you have WebSphere MQ Commands (CMDMQM) as your initial
menu, change the initial menu in your user profile, sign off
and sign on again.

2. Warn all users that you are going to shut down WebSphere MQ,
and that they should not restart their Queue Managers or their MQI
applications until all PTFs have been loaded and applied.

3. Quiesce all queue managers in a controlled manner:
... ENDMQM MQMNAME(*ALL) OPTION(*CNTRLD) ENDCCTJOB(*YES)
... RCDMQMIMG(*YES) TIMEOUT(15)

NB: Using RCDMQMIMG(*YES) may cause the shut down of some queue
managers
to take a very long time. If this is the case then do step 3a.

3a. From a different sign-on session, issue command:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*CNTRLD)
ENDCCTJOB(*NO)
followed by:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*IMMED)
ENDCCTJOB(*YES)

4. If step 3 does NOT log AMQ7A60 ("All queue managers have been
quiesced") then repeat the shut down WebSphere MQ using command:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(15)

5. Shut down the default WebSphere MQ subsystem (QMQM) and also any
user-defined WebSphere MQ subsystems:
... ENDSBS SBS(QMQM) OPTION(*IMMED)

6. Sign off, then sign on again.

7. If you have any testfix PTFs which have been applied on top of your
current Fix Pack (CSD) PTFs, then use RMVPTF to remove these
testfixes.

8. Load and apply this PTF - using the OS/400 menu of PTF commands.

9. Load and apply all other WebSphere MQ PTFs which are requisites for
this PTF. A full list of the PTFs which comprise a Fix Pack can be
seen at http:
//www-306.ibm.com/software/integration/mqfamily/support/summary/

10. If steps 3 or 4 did NOT log AMQ7A60 ("All queue managers have been
quiesced"), you MUST clear WebSphere MQ shared memory by repeating:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(05)

11. Restart the WebSphere MQ subsystem:
... STRSBS SBSD(QMQM/QMQM)

12. Restart one or more Queue Managers, using either the STRMQM command
or option 14 from the WRKMQM panel.

All users who were actively using WebSphere MQ before it was quiesced
should sign off and sign on again before restarting their Queue
Managers or restarting their MQI applications.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI52649      MQM400 CUMULATIVE #70112 FIX PACK (WMQ v7.0.1 COMMANDS & OPS
   SI50685      MQM400 CUMULATIVE #70111 FIX PACK (WMQ v7.0.1 COMMANDS & OPS
   SI49190      MQM400 CUMULATIVE #70110 FIX PACK (WMQ v7.0.1 COMMANDS & OPS
   SI47076      MQM400 CUMULATIVE #70109 FIX PACK (WMQ v7.0.1 COMMANDS & OPS
   SI45772      MQM400 CUMULATIVE #70108 FIX PACK (WMQ v7.0.1 COMMANDS & OPS
   SI44923      MQM400 CUMULATIVE #70107 FIX PACK (WMQ v7.0.1 COMMANDS & OPS
   SI43554      MQM400 CUMULATIVE #70106 FIX PACK (WMQ v7.0.1 COMMANDS & OPS
   SI42603      MQM400 CUMULATIVE #70105 FIX PACK (WMQ v7.0.1 COMMANDS & OPS
   SI41689      MQM400 CUMULATIVE #70104 FIX PACK (WMQ v7.0.1 COMMANDS & OPS
   SI40549      MQM400 CUMULATIVE #70103 FIX PACK (WMQ v7.0.1 COMMANDS & OPS
   SI38999      MQM400 CUMULATIVE MDV 70102 (WMQ v7.0.1 COMMANDS & OPS)
   SI36917      MQM400 CUMULATIVE MDV 70101 (WMQ v7.0.1 COMMANDS & OPS)

Summary Information

System..............................i
Models..............................
Release.............................V7R0M1
Licensed Program...............5724H72
APAR Fixed..........................SE61244
Superseded by:......................View fix details for PTF SI59942
Recompile...........................N
Library.............................QMQM
MRI Feature ........................NONE
Cum Level...........................


System i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG15V","label":"PTF Cover Letters - OS\/400 General"},"Component":"","ARM Category":[],"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"V7R0M1","Edition":"","Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
13 August 2015