PTF Cover Letter
PTF ( Program Temporary Fixes ) Cover letter
HA-INCORROUT RTVASPSSN Value does not match DSPASPSSN value
Pre/Co-Requisite PTF / Fix List
REQ LICENSED PTF/FIX LEVEL
TYPE PROGRAM REL NUMBER MIN/MAX OPTION
---- -------- --- ------- ------- ------
PRE 5770SS1 710 SI49260 00/00 0000
PRE 5770SS1 710 SI48522 00/00 0000
PRE 5770SS1 710 SI48540 00/00 0000
PRE 5770SS1 710 SI44141 00/00 0000
PRE 5770SS1 710 SI44326 00/00 0000
PRE 5770SS1 710 SI40309 00/00 0000
DIST 5770HAS 710 SE53364 NONE 0000 (SEE MRI PTF/FIX LIST BELOW)
MRI PTF/FIX LIST
----------------
APAR SE53364 AFFECTS THESE LANGUAGES. IF YOU HAVE ANY OF THESE
LANGUAGES INSTALLED, INSTALL THE DISTRIBUTION REQUISITE MRI PTF THAT
CORRESPONDS TO THE LANGUAGE(S) INSTALLED ON YOUR SYSTEM.
-----------------------------------------------------------------
: FEATURE LICENSED PTF/FIX :
: CODE LANGUAGE PROGRAM NUMBER :
: ------- ------------------------------- -------- ------- :
: 2924 ENGLISH UPPER/LOWER CASE SBCS 5770HAS SI48316 :
: 2902 ESTONIAN 5770HAS SI48317 :
: 2903 LITHUANIAN 5770HAS SI48318 :
: 2904 LATVIAN 5770HAS SI48319 :
: 2905 VIETNAMESE 5770HAS SI48320 :
: 2906 LAO 5770HAS SI48321 :
: 2909 BELGIAN ENGLISH 5770HAS SI48322 :
: 2911 SLOVENIAN 5770HAS SI48323 :
: 2912 CROATIAN 5770HAS SI48324 :
: 2913 MACEDONIAN 5770HAS SI48325 :
: 2914 SERBIAN 5770HAS SI48326 :
: 2922 PORTUGUESE 5770HAS SI48327 :
: 2923 DUTCH 5770HAS SI48328 :
: 2925 FINNISH 5770HAS SI48329 :
: 2926 DANISH 5770HAS SI48330 :
: 2928 FRENCH 5770HAS SI48331 :
: 2929 GERMAN 5770HAS SI48332 :
: 2930 JAPAN LOWER CASE 5770HAS SI48333 :
: 2931 SPANISH 5770HAS SI48334 :
: 2932 ITALIAN 5770HAS SI48335 :
: 2933 NORWEGIAN - BOKMAL 5770HAS SI48336 :
: 2937 SWEDISH 5770HAS SI48337 :
: 2938 ENGLISH UPPER CASE DBCS 5770HAS SI48338 :
: 2939 SWISS GERMAN 5770HAS SI48339 :
: 2940 SWISS FRENCH 5770HAS SI48340 :
: 2942 SWISS ITALIAN 5770HAS SI48341 :
: 2954 ARABIC 5770HAS SI48342 :
: 2956 TURKISH 5770HAS SI48343 :
: 2957 GREEK 5770HAS SI48344 :
: 2958 ICELANDIC 5770HAS SI48345 :
: 2961 HEBREW 5770HAS SI48346 :
: 2962 JAPANESE 5770HAS SI48347 :
: 2963 BELGIUM DUTCH 5770HAS SI48348 :
: 2966 BELGIUM FRENCH 5770HAS SI48349 :
: 2972 THAI 5770HAS SI48350 :
: 2974 BULGARIAN 5770HAS SI48351 :
: 2975 CZECH 5770HAS SI48352 :
: 2976 HUNGARIAN 5770HAS SI48353 :
: 2978 POLISH LANGUAGE 5770HAS SI48354 :
: 2979 RUSSIAN 5770HAS SI48355 :
: 2980 BRAZILIAN PORTUGUESE 5770HAS SI48356 :
: 2981 CANADIAN FRENCH 5770HAS SI48357 :
: 2984 ENGLISH UPPER/LOWER CASE DBCS 5770HAS SI48358 :
: 2986 KOREAN 5770HAS SI48359 :
: 2987 TRADITIONAL CHINESE 5770HAS SI48360 :
: 2989 SIMPLIFIED CHINESE 5770HAS SI48361 :
: 2992 ROMANIAN 5770HAS SI48362 :
: 2994 SLOVAKIAN 5770HAS SI48363 :
: 2995 ALBANIAN 5770HAS SI48364 :
: 2996 PORTUGUESE MNCS 5770HAS SI48365 :
: 2998 FARSI 5770HAS SI48366 :
-----------------------------------------------------------------
NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels. This PTF may be a prerequisite
for future PTFs. By applying this PTF you authorize and agree to the
foregoing.
This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF. You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.
SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.
The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.
APAR Error Description / Circumvention
-----------------------------------------------
RTVASPSSN value is not what is seen on the DSPASPSSN command
CORRECTION FOR APAR SE58617 :
-----------------------------
Information returned in the RTVASPSSN will agree with the
information show in the DSPASPSSN command.
CIRCUMVENTION FOR APAR SE58617 :
--------------------------------
None.
Activation Instructions
None.
Special Instructions
The helptext for RTVASPSSN has an incorrect structure for the ASPCPY
parameter. The Number of ASP Copy Descriptions and the Length of each
ASP copy description entry fields have been reversed. The helptext
will be updated in a future release to show the correct layout.
The current help text indicates the field layout is:
Position Length Field
1 4 byte integer Offset from beginning of
ASPCPY to the first ASP copy
description entry
5 4 byte integer Number of ASP copy
description entries
9 4 byte integer Length of an ASP copy
description entry
The correct field layout is:
Position Length Field
1 4-byte integer number Offset from beginning of
ASPCPYLST
to first ASP copy
description list entry
5 4-byte integer number Length of each ASP copy
description list entry
9 4-byte integer number Number of ASP copy
description entries
********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI50119 :
=================================================
On each node in the cluster, end clustering, apply the fix, and then
start clustering. It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI48371 :
=================================================
This PTF is an Add Function PTF which must be permanently applied.
Removal of this PTF after step #4 below is not supported.
You must have the most recent level of PTF group SF99368.
Step #1:
In order for this PTF to be fully activated, you must end and restart
the QHASVR job. You can do this by ending and starting the cluster
node using the commands:
ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
Or, you can end the QHASVR job under QSYSWRK subsystem:
ENDJOB JOB(<job-num>/QHAUSRPRF/QHASVR) OPTION(*IMMED)
where <job-num> is the job number.
Issue the WRKCLU command to restart the QHASVR job.
Step #2:
You must restart the *ADMIN instance of the *HTTP server. Do this
with the following commands:
ENDTCPSVR SERVER(*HTTP) INSTANCE(*ADMIN)
STRTCPSVR SERVER(*HTTP) INSTANCE(*ADMIN)
Step #3:
Users must sign off any active sessions which may be using,
PowerHA and sign back on after the PTF has been applied.
Step #4:
After the PTF has been applied on all of the nodes in the
cluster which have PowerHA installed, you must upgrade
the PowerHA version to 2.2.
If your cluster is currently at PowerHA version 1.0,
you must:
CHGCLUVER CLUSTER(<cluster-name>) HAVER(*UP1VER)
CLUVER(*SAME)
After your cluster is at PowerHA version 2.0, you must:
CHGCLUVER CLUSTER(<cluster-name>) HAVER(*UP1MOD)
CLUVER(*SAME)
After your cluster is at PowerHA version 2.1, you must:
CHGCLUVER CLUSTER(<cluster-name>) HAVER(*UP1MOD)
CLUVER(*SAME)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI49232 :
=================================================
In order to fix the problems described by this PTF, the PTF must be
applied on every node in the cluster. You do not have to end the
cluster to do this. However, you should end the CRG jobs associated
with the cluster administrative domain on every cluster node before you
apply the PTF. You can do this one node at a time.
Note, you must end the cluster administrative domain CRG jobs on each
cluster node, apply the PTF, and restart the CRG job before the fix is
available.
The cluster administrative domain CRG jobs will be ended if you end
Cluster Resource Services for each node in your cluster. Cluster
Resource Services can be ended using the End Cluster Node API or CL
command. Optionally, you can end just the cluster administrative domain
jobs without ending your cluster nodes by calling the Change
Cluster Recovery CL command.
To determine if any cluster administrative domain jobs are active on
your system, use the WRKACTJOB command from the command line of your
system. Look for any system jobs which have the same name as any
cluster administrative domains which you have created in your cluster.
If there are any cluster administrative domain jobs on your system,
they must be ended. You can end just the cluster administrative domain
jobs on every node with this command:
CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(*ALL)
ACTION(*END)
where <cluster> is the name of your cluster and <admin_domain> is the
name of a cluster administrative domain. You should call this command
once for each cluster administrative domain in your cluster.
You must sign off all sessions where any cluster administrative domain
commands or APIs were used before the PTF can be applied.
After the PTF has been applied on a system, you can restart the cluster
jobs that were ended before the PTF was applied. If Cluster Resource
Services was ended, you can use the Start Cluster Node API or CL
command to start Cluster Resource Services for each cluster node. If
you used the Change Cluster Recovery CL command to end just the cluster
administrative domain jobs, they can be restarted on each cluster node
using the Change Cluster Recovery command as follows:
CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(<node>)
ACTION(*STRCRGJOB)
where <cluster> is the name of your cluster, <admin_domain> is the name
of the cluster administrative domain, and <node> is the cluster node
name for the system. You should call this command once for each cluster
administrative domain in your cluster.
After the PTF has been applied, you should also restart the QPRFSYNCH
job on every node in your cluster. You can restart the QPRFSYNCH job
with the following commands:
CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI42638 :
=================================================
In order for the issue to be resolved completely, this fix needs to be
on all the active cluster nodes participating in the cluster
administrative domain. Failure to do so would cause PRTDEV MREs with
IGCFEAT as one of the monitored attributes to go INCONSISTENT in
certain circumstances.
Note, you must end the cluster administrative domain CRG jobs on each
cluster node, apply the PTF, and restart the CRG job before the fix is
available.
The cluster administrative domain CRG jobs will be ended if you end
Cluster Resource Services for each node in your cluster. Cluster
Resource Services can be ended using the End Cluster Node API or CL
command. Optionally, you can end just the cluster administrative domain
jobs without ending your cluster nodes by calling the Change Cluster
Recovery CL command.
To determine if any cluster administrative domain jobs are active on
your system, use the WRKACTJOB command from the command line of your
system. Look for any system jobs which have the same name as any
cluster administrative domains which you have created in your cluster.
If there are any cluster administrative domain jobs on your system,
they must be ended. You can end just the cluster administrative domain
jobs on every node with this command:
CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(*ALL)
ACTION(*END)
where <cluster> is the name of your cluster and <admin_domain> is the
name of a cluster administrative domain. You should call this command
once for each cluster administrative domain in your cluster.
You must sign off all sessions where any cluster administrative domain
commands or APIs were used before the PTF can be applied.
After the PTF has been applied on a system, you can restart the cluster
jobs that were ended before the PTF was applied. If Cluster Resource
Services was ended, you can use the Start Cluster Node API or CL
command to start Cluster Resource Services for each cluster node. If
you used the Change Cluster Recovery CL command to end just the cluster
administrative domain jobs, they can be restarted on each cluster node
using the Change Cluster Recovery command as follows:
CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(<node>)
ACTION(*STRCRGJOB)
where <cluster> is the name of your cluster, <admin_domain> is the name
of the cluster administrative domain, and <node> is the cluster node
name for the system. You should call this command once for each cluster
administrative domain in your cluster.
After the PTF has been applied, you should also restart the QPRFSYNCH
job on every node in your cluster. You can restart the QPRFSYNCH job
with the following commands:
CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI36365 :
=================================================
In order to fix the problems described by this PTF, the PTF must be
applied on every node in the cluster. You do not have to end the
cluster to do this. However, you must end the CRG jobs associated with
the cluster administrative domain on every cluster node before you
apply the PTF. You can do this one node at a time.
Note, you must end the cluster administrative domain CRG jobs on each
cluster node, apply the PTF, and restart the CRG job before the fix is
available.
The cluster administrative domain CRG jobs will be ended if you end
Cluster Resource Services for each node in your cluster. Cluster
Resource Services can be ended using the End Cluster Node API or CL
command. Optionally, you can end just the cluster administrative domain
jobs without ending your cluster nodes by calling the Change Cluster
Recovery CL command.
To determine if any cluster administrative domain jobs are active on
your system, use the WRKACTJOB command from the command line of your
system. Look for any system jobs which have the same name as any
cluster administrative domains which you have created in your cluster.
If there are any cluster administrative domain jobs on your system,
they must be ended. You can end just the cluster administrative domain
jobs on every node with this command:
CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(*ALL)
ACTION(*END)
where <cluster> is the name of your cluster and <admin_domain> is the
name of a cluster administrative domain. You should call this command
once for each cluster administrative domain in your cluster.
You must sign off all sessions where any cluster administrative domain
commands or APIs were used before the PTF can be applied.
After the PTF has been applied on a system, you can restart the cluster
jobs that were ended before the PTF was applied. If Cluster Resource
Services was ended, you can use the Start Cluster Node API or CL
command to start Cluster Resource Services for each cluster node. If
you used the Change Cluster Recovery CL command to end just the cluster
administrative domain jobs, they can be restarted on each cluster node
using the Change Cluster Recovery command as follows:
CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(<node>)
ACTION(*STRCRGJOB)
where <cluster> is the name of your cluster, <admin_domain> is the name
of the cluster administrative domain, and <node> is the cluster node
name for the system. You should call this command once for each cluster
administrative domain in your cluster.
After the PTF has been applied, you should also restart the QPRFSYNCH
job on every node in your cluster. You can restart the QPRFSYNCH job
with the following commands:
CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI46628 :
=================================================
If you are a multiple system user, and intend on installing this PTF on
a system, then saving and restoring product 5770HAS onto other systems,
then you need to run the following command on the other systems after
restoring product 5770HAS:
QSYS/CALL PGM(QHASM/QPZ1HA03)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI48012 :
=================================================
In order for this PTF to be fully activated, you must end and restart
the QHASVR job. You can do this by ending and starting the cluster
node using the commands:
ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
Or, you can end the QHASVR job under QSYSWRK subsystem:
ENDJOB JOB(<job-num>/QHAUSRPRF/QHASVR) OPTION(*IMMED)
where <job-num> is the job number.
Issue the WRKCLU command to restart the QHASVR job.
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI45741 :
=================================================
Step 1:
In order for this PTF to be fully activated, you must end and restart
the QHASVR job. You can do this by ending and starting the cluster
node using the commands:
ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
Or, you can end the QHASVR job under QSYSWRK subsystem:
ENDJOB JOB(<job-num>/QHAUSRPRF/QHASVR) OPTION(*IMMED)
where <job-num> is the job number.
Issue the WRKCLU command to restart the QHASVR job.
Step 2:
You must restart the ADMIN2 instance of the *HTTP server. Do this
with the following commands:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
Step 3:
Users must sign off any active sessions which may be using
PowerHA and sign back on after the PTF has been applied.
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI44148 :
=================================================
This PTF is an Add Function PTF which must be permanently applied.
Removal of this PTF after step #4 below is not supported.
You must have the most recent PTF group SF99368.
You must install PRPQ 5799-HAS in order to use the functions
provided in this PTF.
Step #1:
In order for this PTF to be fully activated, you must end and restart
the QHASVR job. You can do this by ending and starting the cluster
node using the commands:
ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
Or, you can end the QHASVR job under QSYSWRK subsystem:
ENDJOB JOB(<job-num>/QHAUSRPRF/QHASVR) OPTION(*IMMED)
where <job-num> is the job number.
Issue the WRKCLU command to restart the QHASVR job.
Step #2:
You must restart the *ADMIN instance of the *HTTP server. Do this
with the following commands:
ENDTCPSVR SERVER(*HTTPSVR) INSTANCE(*ADMIN)
STRTCPSVR SERVER(*HTTPSVR) INSTANCE(*ADMIN)
Step #3:
Users must sign off any active sessions which may be using,
PowerHA and sign back on after the PTF has been applied.
Step #4:
After the PTF has been applied on all of the nodes in the
cluster which have PowerHA installed, you must upgrade
the PowerHA version to 2.1.
If your cluster is currently at PowerHA version 1.0,
you must:
CHGCLUVER CLUSTER(<cluster-name>) HAVER(*UP1VER)
CLUVER(*SAME)
After your cluster is at PowerHA version 2.0, you must:
CHGCLUVER CLUSTER(<cluster-name>) HAVER(*UP1MOD)
CLUVER(*SAME)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI36179 :
=================================================
End Cluster Resource Services on the node using the ENDCLUNOD command,
apply the PTF, signoff/signon, and then restart Cluster Resource
Services using the STRCLUNOD command.
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI47000 :
=================================================
In order for this PTF to be fully activated, you must restart
the ADMIN2 instance of the *HTTP server. Do this with the
following commands:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
Default Instructions
THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.
Supersedes
PTF/FIX NO(S). APAR TITLE LINE
-------------- ------------------------------------------------------------
SI52967 MSGCPIB711-HLIC-94XXDISK IN MULTIPATH ENVIRONMENT, ENDSVCSSN
SI52687 New function to support SVC and Storwize Global Mirror with
SI52687 HASM-HASMS-F/QSYCHGFU-T/QSI506030Y-MSGCPF228A PTF
SI50603 HASM-F/QYASPSSN-T/QYASPSSN-MSGHAE9898 STRASPSSN FOR TYPE(*FL
SI50474 F/QYASSVCCMN-MSGHAE2057-MOD/YASSVCVCT CMMVC6209E FLASHCOPY M
SI50443 HASM-F/QYASPCMN-T/QYASPCMN-MSGHAE2024 MSGHAE2024 DOING ADDAS
SI50331 HA-INCORROUT Multiple paths missing after CHGCRGPRI
SI50202 HA-INCORROUT CMUN00022E sent for STRASPSSN
SI50119 HASM-INCORROUT DSPSVCSSN NOT CORRECT AFTER SI48371 APPLIED A
SI50119 OSP-MSGSTRASPSSNLOC(*NONE)-PAR-940XMISC CHGASPCPYD ASPCPY(EC
SI50119 HA-INCORROUT MSGHAE0045 PowerHA GUI during configure mirrori
SI48496 ENDSVCSSN COMMAND ARE INFO MESSAGES: CPPEA33 AND CPPEA35
SI48371 HASM-NF: PowerHA Early 2013 New Function
SI48371 HASM-NF: PowerHA Early 2013 New Function
SI48371 HASM-NF: PowerHA Early 2013 New Function
SI48371 HASM-NF: PowerHA Early 2013 New Function
SI49232 HASM-F/QCAFLD-T/QHAOH-MSGCPD0085 CPD0085 DURING ADDCADMRE OF
SI48746 HA-INCORROUT ADMIN DOMIN *PRTDEV NO ERROR MESSAGE IN JOB LOG
SI46617 HA-INCORROUT ADMIN DOMAIN MRE HAS INCORRECT STATUS
SI42638 OSP-MSGCPF0001 Adding a monitored resource entry to an admin
SI36365 OSP-INCORROUT Fixes for Cluster Administrative Domain
SI46628 HA-INCORROUT MSGCPF2204 User profile QHAUSRPRF not found
SI48259 OSP-OTHER-UNPRED ENDSVCSSN DOESN'T AUTOMATICALLY REMOVE THE
SI48012 HA-INCORROUT MSGCPF2407 QHASVR job ends
SI47047 HASM-MSGCPI096B VARY ON OF FLASHCOPY IASP SUSPENDS GEOGRAPHI
SI47000 HA-INCORROUT POWERHA GUI SHOWS INCORRECT PRODUCTION COPY CAP
SI45741 PowerHA: April 2012 New Function
SI45741 HA-INCORROUT CFGGEOMIR fails with secondary ASPs.
SI45741 HA-INCORROUT STRSVCSSN fails for a *FLASHCOPY session
SI45917 HA-MSGHAE9898 CHGCRGPRI IN A POWERHA MMIR V7000 FAILS
SI45356 HA-INCORROUT QYASDEVHCK program fails during STRCRG
SI45080 HA-UNPRED Support for SVC/V7000 reverse FlashCopy
SI44148 HA-NF October 2011 PowerHA New Function
SI44148 New Function: PowerHA GUI
SI44148 HA-New Function: Provide CFGGEOMIR command
SI44148 HA-UNPRED SVC / Storwize V7000 Support
SI44148 HA-New Function: PowerHA N-2 Version Support
SI44148 HA-INCORROUT Base enablement for IASP functionality
SI44148 HA-New Function PowerHA GUI
SI44148 HA-UNPRED SVC / Storwize V7000 Support
SI44148 HA-UNPRED SVC / Storwize V7000 Support
SI44148 HA-UNPRED SVC / Storwize V7000 Support
SI37239 HA-INCORROUT Enable RTVASPCPYD, RTVASPSSN
SI43597 HA-MSG4429 Unable to display ASP copy description
SI43434 HA-INCORROUT XSM Unable to vary on ASP after detach
SI42888 HA-INCORROUT DSPASPSSN Tracking Space Used is incorrect.
SI42215 HA-INCORROUT Wrong node name displayed for ASP session
SI42030 HAS-INCORROUT XSM Flashcopy target not identified
SI41918 HA-INCORROUT Base Function to Enable Future Extensions
SI41610 HASM-INCORROUT ENHANCEMENT TO PREVENT LOCK CONDITION.
SI41277 HA-INCORROUT Fields missing in QYASRTVINF
SI40497 HA-INCORROUT Base Function to Enable Future Extensions
SI40180 HA-INCORROUT CHGASPSSN *CHGATTR fails for flash copy
SI39912 HA-INCORROUT Recovery from LUN level switch fails
SI39674 HA-MSGCPFBBD3 Error invoking CRG exit programs
SI39549 HA-INCORROUT Must select async mode when async delivery spec
SI39236 HA-INCORROUT CHGCRGPRI fails for global mirror
SI39181 HA-INCORROUT Sync progress not correct for DSPASPSSN
SI38975 HA-MSGHAE2013 STRASPSSN fails
SI38609 HA-INCORROUT Flash copy role is not correct
SI38325 HA-INCORROUT QYASPJNEXT fails on remove node
SI38321 HA-INCORROUT CHGCRGPRI fails with an active CRG
SI38147 HA-MSGHAE0045 message text not correct
SI37995 HA-INCORROUT CHGCRGPRI results in QYASSTESWE failure
SI37995 HA-MSGCPF9D8D Stream file failed to open
SI37995 HA-INCORROUT CHGCRGPRI fails
SI37604 HA-INCORROUT Correct PowerHA replication error checking
SI36607 HA-INCORROUT Unable to change ASP copy description
SI36607 HA-INCORROUT QYASPJNEXT fails removing a node from a CRG rec
SI36607 HA-INCORROUT DSPASPCPYD Fails
SI36607 HA-MSGCPDBB0E Exit program compare fails
SI36607 HA-MSGHAE2009 Unable to create a flash copy session
SI36607 HA-INCORROUT Support for space efficient flash copy
SI36607 HA-INCORROUT Remove consistency parameters from CHGASPSSN
SI36416 HA-MSGCPFAF02 Unable to run DSCLI command
SI39031 HA-RCDSSPN3-MSGCPFAF02 unable to run dscli operations using
SI36972 HA-INCORROUT CRG site does not become active
SI36179 correction for problems found during final regression test
Summary Information
System.............................. | i |
Models.............................. | |
Release............................. | V7R1M0 |
Licensed Program............... | 5770HAS |
APAR Fixed.......................... | View details for APAR SE58617 |
Superseded by:...................... | View fix details for PTF SI68260 |
Recompile........................... | N |
Library............................. | QHASM |
MRI Feature ........................ | NONE |
Cum Level........................... | C4283710 |
IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.
Was this topic helpful?
Document Information
Modified date:
28 April 2014