IBM Support

NEC T30A and T60A Library Configuration Information for IBM Tivoli Storage Manager Server

Preventive Service Planning


Abstract

Configuration Information for NEC T30A and T60A Libraries

Content


NEC T30A
NEC T60A

Starting Drive Address
Starting Storage Slot Addresses
Changer Address
257
4097
1

Notes:

1. Library capacity
    • NEC T30A - 2 drives 30 slots
    • NEC T60A - 4 drives 60 slots
2. Barcodes with media identifier suffix Lx are required. Barcode label length must be set to 8. This can be set through Tape Library Remote Manager -> Configure Library -> Physical.

3. Device identifications and firmware levels used during validation
    Validated with TSM 6.2.3 and TSM 6.3.0
    Library ID : NEC LL-2B01 --- Firmware : 0001
    Drive ID : IBM ULTRIUM-HH4 --- Firmware : B5Q1 (FC)
    Drive ID : IBM ULTRIUM-HH5 --- Firmware : B5Q1 (FC)
    Drive ID : IBM ULTRIUM-HH3 --- Firmware : B5Q1 (SAS)
    Drive ID : IBM ULTRIUM-HH4 --- Firmware : B5Q1 (SAS)
    Drive ID : IBM ULTRIUM-HH5 --- Firmware : B5Q1 (SAS)

    Validated with TSM 6.3.5 and TSM 7.1.0
    Library ID : NEC LL-2B01 --- Firmware : 0004
    Drive ID : IBM ULTRIUM-HH4 --- Firmware : C5X1 (FC)
    Drive ID : IBM ULTRIUM-HH5 --- Firmware : C5X1 (FC)
    Drive ID : IBM ULTRIUM-HH6 --- Firmware : D8E9 (FC)
    Drive ID : IBM ULTRIUM-HH4 --- Firmware : C5X1 (SAS)
    Drive ID : IBM ULTRIUM-HH5 --- Firmware : C5X1 (SAS)
    Drive ID : IBM ULTRIUM-HH6 --- Firmware : D8E9 (SAS)

4. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is supported.

5. The T30A/T60A is available with the following half height IBM Ultrium drives:
6. The IBM device driver is required for IBM Ultrium drives. IBM device drivers are available at IBM Fix Central. Choose the following options from the drop-down menus.
  • Product Group -> System Storage
  • System Storage -> Tape systems
  • Tape systems -> Tape drivers and software
  • Tape drivers and software -> Tape device drivers
  • Platform -> Select the operating system for the device driver

7. For SAS interface, see Technote 1396706 for information on platforms on which SAS devices are supported.


Library and drive may require different minimum Tivoli Storage Manager levels. Therefore, ensure that both library and drive hardware are supported. See "Supported Devices for AIX, HP-UX, Solaris and Windows" or "Supported Devices for Linux" for more support information including minimum supported version levels and supported platforms.

More information regarding device configuration is available in the Tivoli Storage Manager Administrator's Guide, which can be found in the IBM Tivoli Storage Manager information center.

[{"Product":{"code":"SSGSG7","label":"Tivoli Storage Manager"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Component":"Server","Platform":[{"code":"PF002","label":"AIX"},{"code":"PF010","label":"HP-UX"},{"code":"PF016","label":"Linux"},{"code":"PF027","label":"Solaris"},{"code":"PF033","label":"Windows"}],"Version":"All Supported Versions","Edition":"","Line of Business":{"code":"LOB26","label":"Storage"}}]

Document Information

Modified date:
17 June 2018

UID

swg21503951

Page Feedback