IBM Support

Memory installation instructions - Netfinity 3500

Product Documentation


Abstract

This document contains Memory installation instructions for PC Server 320.

Content

Memory configuration

  • The maximum amount of system memory the server supports is 512 MB.
  • The server supports 32 MB, 64 MB, and 128 MB unbuffered 3.3V dual-inline memory modules (DIMMs).
  • Compatible part numbers
  • Install DIMMs in adjacent connectors, with no vacant memory connectors in between, starting at Bank 0.
    (refer to the "System Board Memory Connectors Diagram", below).
  • If you are installing DIMMs of different sizes, install the DIMMs with greater memory capacity starting at Bank 0,
    and the smaller size DIMMs towards Bank 3.
  • After installing or removing a DIMM, you must save the new configuration information using the
    F1 Configuration/Setup Utility program at system startup.

System board memory connectors diagram

  • The server has four connectors for installing DIMMs, banks 0 through 3.
  • Bank 0 is the connector closest to the edge of the system board.

memory connectors

Possible memory configurations (Part numbers)

Total System Memory
Bank 0
Bank 1
Bank 2
Bank 3
32 MB(minimum) 32 MB DIMM empty empty empty
64 MB 64 MB DIMM empty empty empty
64 MB 32 MB DIMM 32 MB DIMM empty empty
96 MB 32 MBDIMM 32 MBDIMM 32 MBDIMM empty
128 MB 128 MB DIMM empty empty empty
128 MB 64 MB DIMM 64 MB DIMM empty empty
256 MB 128 MB DIMM 128 MB DIMM empty empty
256 MB 128 MB DIMM 64 MB DIMM 64 MB DIMM empty
512 MB (maximum) 128 MB DIMM 128 MB DIMM 128 MB DIMM 128 MB DIMM

Document Location

Worldwide

Operating System

Older System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU02OZG","label":"Older System x->Netfinity 3500->8644"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
23 January 2019

UID

ibm1DDSE-44JG8W