Troubleshooting
Problem
Instructions on how to install the system into a rack
Resolving The Problem
| Installing the server in the rack |
|---|
Reverse the steps to remove the server from the rack.
- Lift and place the server on the lower edge of the mounting bracket.
- Slide the server as far back as it will go.
- Using the thumb screws on the front of the server; secure the server to the brackets.
- If you have additional servers to install, repeat steps 1 through 3 for each xSeries 330.
- Install all external cables and power cords to the servers.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW18E","label":"Older System x->xSeries 135"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW18L","label":"Older System x->xSeries 330"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"HWP99","label":"IntelliStation Pro->IntelliStation R Pro"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
23 January 2019
UID
ibm1MIGR-45130