Installing Microsoft Windows XP Professional x64 Edition - IBM IntelliStation M Pro (Type 6225)

Steps

Installation instructions for Microsoft Windows XP Professional x64 Edition for IBM IntelliStation M Pro (Type 6225)
1.0 What you will need
2.0 Where to download device drivers and files
3.0 Installation instructions for Microsoft Windows XP Professional x64 Edition
4.0 Post-installation instructions: Installing and updating device drivers
4.1 Installing the device driver for the Audio Driver
4.2 Resolving an Unknown device: Installing the Alert Standard Format device driver
5.0 Notices

Revision level: 1.00

Updated: 08 June 2005

(C) Copyright International Business Machines Corporation 2005. All rights reserved. US Government Users Restricted Rights - Use, duplication, or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Note: Before using this information and the product it supports, read the general information in Section 5.0 Notices in this document.

Supported system: IBM IntelliStation M Pro (Type 6225)

Follow the instructions in this document in sequential order unless these instructions advise you otherwise. Windows and messages might differ from those in this document. Throughout this document, the term select is used to denote the use of arrow keys, the Tab key, or Alt + a letter combination to make a selection from a menu.

You must have the following software and hardware for the installation:

• A licensed copy of Microsoft Windows XP Professional x64 Edition.

• For supported hard disk drives, see list of supported options and part numbers for the workstation.

For more information, see the documentation that comes with your workstation.

You can download device drivers and files from the following site:

• IBM United States Support Web site

• For countries outside the United States

• IBM device driver download site

• IBM IntelliStation M Pro (Type 6225) device drivers download site
  

This workstation supports SCSI hard disks, SATA hard disks and/or Both (Mixed SCSI and SATA). (For 64 Bit systems, SCSI and SATA disk controller drivers are included in the operating system.)

To install Windows XP Professional x64 Edition, complete the following steps:

1. When you are prompted to install Windows XP Professional, press Enter.

2. Press Enter again to indicate that this is a new installation and not a repair.

3. When the license agreement is displayed, read the license agreement and press F8 to agree.

4. When Windows XP Professional Setup displays all hard disk storage that is available on the workstation, select one of the following options to choose or create a drive partition in which to install Windows XP Professional:
   • Allow Setup to create a partition: To partition the entire hard disk as one primary partition, highlight non-partitioned space for the hard disk drive on which you want to install Windows XP Professional and press Enter.

   • Create a partition: To create a partition, highlight Non-partitioned space for the hard disk drive on which you want to install Windows XP Professional and press C. You are prompted to indicate how much available space to allocate from the nonpartitioned drive. Type the amount of space (in MB) and press Enter.

   • Delete a partition.

5. When you are prompted to select a file system, select NTFS file system.

   • Setup formats the selected partition and copies the applicable files to the drive partition. This process takes several minutes.

   • The workstation restarts to the graphical portion of Setup where setup continues with the installation of Windows XP Professional. During this process, setup automatically installs and configures the devices in the workstation. This process takes several minutes.

6. Change the regional settings if you are not installing the workstation in the U.S, and then click Next. To modify the regional settings after installing Windows XP Professional, click Control Panel and then click Regional Options.
   
   
7. In the Personalize Your Software window, when you are prompted for your name and organization, type your name and organization. The names that you type are used as default workstation names. Applications that you install later use this information for the product registration and document identification. Click Next.
   
   
8. When you are prompted for the Windows XP Professional Setup CD-Key, type the Windows XP Professional Setup CD-Key in the applicable fields. Click Next. (Setup uses the organization name that was entered previously, as a suggested name for the workstation.)
   
   

9. In the Licensing Modes window, select the applicable licensing mode for your organization. Click Next.

10. In the Name and Administrator Password window, when you are prompted for an administrator password and workstation name, type the workstation name and password. Click Next. (Setup uses the organization name that was entered previously as a suggested name for the workstation.) Passwords are case sensitive. Be sure to use a combination of uppercase and lowercase letters with at least one number for your password.
    
    
11. In the Time Zone window, set the current time. To change the date, click the button to the right of the date. To change the time, highlight the value that you want to change and enter the new values using the keyboard or the Up Arrow and Down Arrow keys. Click Next. Windows XP Professional services perform many tasks that are dependent on the accuracy of the time and date settings of the workstation. Be sure to select the correct time zone for the workstation location to avoid problems.
    
    

12. In the Networking Settings window, select Typical or Custom settings. If you are prompted, type the applicable network information. Click Next to install Windows networking components.

13. In the Workgroup or Computer Domain window, select one of the following options:

    • No, this computer is not on a network, it is a network without a domain.

    • Yes, make this computer a member of the following domain.

    Type the workgroup or domain name in the applicable field. Click Next.
    
    The remaining operating-system components are installed and configured according to the options that you specified. The display in the left column is the amount of time remaining until the Windows XP Professional installation is completed. This process might take several minutes.

    When Windows XP Professional Setup has completed installation, the workstation automatically restarts.

14. After Windows XP Professional starts, type the administrator password to log on.
    
    

Use the procedures in the following sections to install the device drivers. To open Device Manager, complete the following steps:

1. Click Start.

2. Right-click My Computer.

3. Click Manage and select Device Manager in the left panel.
   

Use the procedures in the following sections to install the device drivers and to resolve any Unknown device.

1. Download the latest Audio device driver.
   
   

2. Unzip the audio device driver file and run Setup.exe on the IntelliStation.

3. Follow the SoundMax installation wizard to set up the audio device driver.

4. After the installation, when the workstation prompts you to reboot, click OK.

5. Restart the workstation.
   

To resolve unknown devices, complete the following steps:

1. Download the Alert Standard Format Update v.2.0.0 device driver (zip) file to a local drive.

2. Unzip the files to c:\drivers\asf. You will need to navigate to this location later.

3. In the Device Manager, select and right-click the Unknown Device, and then click Update Driver.

4. When the message Can Windows connect to Windows Update to search for software? is displayed, select No, not at this time and click Next.

5. Select Install from a specific location and click Next.

6. Clear the Search removable media check box, check Include this location in the search check box, and then click Browse.

7. When prompted, navigate to c:\drivers\. Select the ASF folder and click OK.

8. Click Next to install the device driver.

9. Click Finish.

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

IBM, IntelliStation, PS/2, and OS/2 are trademarks of International Business Machines Corporation in the United States, other countries, or both.

Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.

Intel, MMX, and Pentium are trademarks of Intel Corporation in the United States, other countries, or both.

Other company, product, or service names may be trademarks or service marks of others.