Installing Microsoft Windows XP Professional Edition with Integrated SP2 - IBM IntelliStation Z Pro (Type 6223)

Content

Installation instructions for Microsoft Windows XP Professional Edition with Integrated SP2 for IBM IntelliStation Z Pro (Type 6223)I

1.0 What you will need

2.0 Where to download device drivers and files

3.0 Installation instructions for Microsoft Windows XP Professional Edition with Integrated SP2

4.0 Post-installation instructions: Installing and updating device drivers

• 4.1 Resolving an Unknown device: Installing the Alert Standard Format device driver
• 4.2 Resolving Multimedia Audio Controller: Installing the SoundMAX device driver
• 4.3 Installing an IBM system board device driver

5.0 Notices

Revision level: 1.00

Updated: 20 October 2005

(C) Copyright International Business Machines Corporation 2005. All rights reserved. US Government Users Restricted Rights - Use, duplication, or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Note: Before using this information and the product it supports, read the general information in Section 5.0 Notices in this document.

Supported system: IBM IntelliStation Z Pro (Type 6223)

Follow the instructions in this document in sequential order unless these instructions advise you otherwise. Windows and messages might differ from those in this document. Throughout this document, the term select is used to denote the use of arrow keys, the Tab key, or Alt + a letter combination to make a selection from a menu.

You must have the following software and hardware for the installation:

• A licensed copy of Microsoft Windows XP Professional Edition with Integrated SP2.
• Supported hard disk drives: list of supported options and part numbers for the workstation
• For a workstation with a SCSI drive, a USB diskette drive.

For more information, see the documentation that comes with your workstation.

You can download device drivers and files from the following site:

• IBM United States Support Web site
• Countries outside the United States
• IBM device driver download site
• IBM IntelliStation Z Pro (Type 6223) device drivers download site

If you are installing Microsoft Windows XP Professional Edition with Integrated SP2 on a workstation with a SCSI drive, you must connect an external USB diskette drive and download and install the SCSI device driver. If you are installing the operating system on a workstation with a SATA drive that is controlled by the integrated Intel Sata controller, skip step 2. You do not have to install a SATA device driver. The SATA device driver is included in Windows XP Professional Edition with Integrated SP2.

To install Microsoft Windows XP Professional Edition, complete the following steps:

1. Turn on the workstation and insert the Windows XP Professional Setup CD into the CD drive. When you are prompted with the message Press any key to boot from cd, press any key. Setup copies files from the Setup CD. This process takes several minutes.
2. For a workstation with a SATA drive, skip to step 3.

   For a workstation with an integrated Intel Sata controller and a SCSI drive (not a SATA drive), connect an external USB diskette drive, and complete the following steps:

   1. Download the SCSI controller.
   2. When the message Setup is inspecting your computer's hardware configuration is displayed, press F6.
   3. When prompted, press S to specify an add-in device driver.
   4. Insert the device driver diskette into the diskette drive. Windows XP Professional Setup checks the diskette for a device driver.
   5. When the names of the device drivers are displayed, select Adaptec Ultra320 SCSI driver for XP and click Next. Windows XP Professional Setup loads the device driver and continues the installation of the operating system.
3. When you are prompted to install Windows XP Professional, press Enter.
4. Press Enter again to indicate that this is a new installation and not a repair.
5. When the license agreement is displayed, read the license agreement and press F8 to agree.
6. When Windows XP Professional Setup displays all hard disk storage that is available on the workstation, select one of the following options to choose or create a drive partition in which to install Windows XP Professional:
   • Allow Setup to create a partition: To partition the entire hard disk as one primary partition, highlight non-partitioned space for the hard disk drive on which you want to install Windows XP Professional and press Enter.
   • Create a partition: To create a partition, highlight Non-partitioned space for the hard disk drive on which you want to install Windows XP Professional and press C. You are prompted to indicate how much available space to allocate from the nonpartitioned drive. Type the amount of space (in MB) and press Enter.
   • Delete a partition.
7. When you are prompted to select a file system, select NTFS file system.

   Notes:

   • Setup formats the selected partition and copies the applicable files to the drive partition. This process takes several minutes.
   • The workstation restarts to the graphical portion of Setup where Setup continues with the installation of Windows XP Professional. During this process, Setup automatically installs and configures the devices in the workstation. This process takes several minutes.
8. Change the regional settings if you are not installing the workstation in the U.S, and then click Next.

   Note: To modify the regional settings after installing Windows XP Professional, click Control Panel and then click Regional Options.

9. In the Personalize Your Software window, when you are prompted for your name and organization, type your name and organization. The names that you type are used as default workstation names. Applications that you install later use this information for the product registration and document identification. Click Next.
10. When you are prompted for the Windows XP Professional Setup CD-Key, type the Windows XP Professional Setup CD-Key in the applicable fields. Click Next. (Setup uses the organization name that was entered previously, as a suggested name for the workstation.)
11. In the Licensing Modes window, select the applicable licensing mode for your organization. Click Next.
12. In the Name and Administrator Password window, when you are prompted for an administrator password and workstation name, type the workstation name and password. Click Next. (Setup uses the organization name that was entered previously as a suggested name for the workstation.)

    Note: Passwords are case sensitive. Be sure to use a combination of uppercase and lowercase letters with at least one number for your password.

13. In the Time Zone window, set the current time. To change the date, click the button to the right of the date. To change the time, highlight the value that you want to change and enter the new values using the keyboard or the Up Arrow and Down Arrow keys. Click Next.

    Note: Windows XP Professional services perform many tasks that are dependent on the accuracy of the time and date settings of the workstation. Be sure to select the correct time zone for the workstation location to avoid problems.

14. In the Networking Settings window, select Typical or Custom settings. If you are prompted, type the applicable network information. Click Next to install Windows networking components.
15. In the Workgroup or Computer Domain window, select one of the following options:
    • No, this computer is not on a network, it is a network without a domain.
    • Yes, make this computer a member of the following domain.

    Type the workgroup or domain name in the applicable field. Click Next.

    The remaining operating-system components are installed and configured according to the options that you specified. The display in the left column is the amount of time remaining until the Windows XP Professional installation is completed. This process might take several minutes.

    When Windows XP Professional Setup has completed installation, the workstation automatically restarts.

16. After Windows XP Professional starts, type the administrator password to log on.

Use the procedures in the following sections to install the device drivers and resolve any Unknown device. To open Device Manager, complete the following steps:

1. Click Start.
2. Right-click My Computer.
3. Click Manage and select Device Manager in the left panel.

To resolve unknown devices, complete the following steps:

1. Download the Alert Standard Format Update v.2.0.0 device driver (zip) file to a local drive.
2. Unzip the files to c:\drivers\asf. You will need to navigate to this location later.
3. In Device Manager, select and right-click the Unknown Device, and then click Update Driver.
4. When the message Can Windows connect to Windows Update to search for software? is displayed, select No, not at this time and click Next.
5. Select Install from a specific location and click Next.
6. Clear the Search removable media check box, check Include this location in the search check box, and then click Browse.
7. When prompted, navigate to c:\drivers\. Select the ASF folder and click OK.
8. Click Next to install the device driver.
9. Click Finish.

To install the SoundMAX device driver, complete the following steps:

1. Download Audio Device Driver for Microsoft Windows XP Pro Edition.
2. Unzip the files toc:\drivers\audio.
3. Browse to c:\drivers\audio\, and double-click the executable file (Setup.exe) to run it. The SoundMAX installation wizard opens.
4. Click Next to install the audio drivers.
5. Click Finish to restart your workstation and complete the installation process.

To install the IBM system board device drivers, complete the following steps:

1. Download the Intel Chipset Software Installation Utility and use one of the following procedures:
   • Click Open to run the file from its location on the IBM Web site (preferred).
   • Transfer the file to a local drive, and double-click the executable (exe) file to run it.
2. In the Welcome window, click Next.
3. In the License Agreement window, click Yes to agree to the License Agreement.
4. At the Readme information, click Next.
5. After the device drivers are installed, click Finish (restarts the workstation).
6. Repeat this process for each of the system board device drivers.

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

IBM and IntelliStation are trademarks of International Business Machines Corporation in the United States, other countries, or both.

Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.

Intel, Intel Xeon, Itanium, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

Other company, product, or service names may be trademarks or service marks of others.