Install Image Services Centera SDK 3.3 libraries on different supported platforms

Content

1. Download Centera SDK 3.3 libraries from Dell EMC website.
2. Extract the downloaded folder and go to centera_sdk_<platform>\centera_sdk\lib
3. Rename the downloaded files. The files are appended with the SDK version by default. Remove the appended version from 32-bit libraries.
   Example: Default name of downloaded file: libFPCore32.so.3.3.739
                      Edit the file name to: libFPCore32.so
4. Stop Image Services using this command: initfnsw -y stop
5. Take a backup of Centera 3.2 SDK for the following:
   AIX:
   cd /fnsw/lib/shobj
   cp libFPLibrary.a libFPLibrary.a.SDK3.2
   cp libFPCore32.a libFPCore32.a.SDK3.2
   cp libFPParser32.a libFPParser32.a.SDK3.2
   cp libFPStreams32.a libFPStreams32.a.SDK3.2
   cp libFPUtils32.a libFPUtils32.a.SDK3.2
   cp libFPXML32.a libFPXML32.a.SDK3.2
   cp libPAI_module32.a libPAI_module32.a.SDK3.2
   HP Itanium:
   cd /fnsw/lib/shobj
   cp libFPLibrary.so libFPLibrary.so.SDK3.2
   cp libFPCore32.so libFPCore32.so.SDK3.2
   cp libFPParser32.so libFPParser32.so.SDK3.2
   cp libFPStreams32.so libFPStreams32.so.SDK3.2
   cp libFPUtils32.so libFPUtils32.so.SDK3.2
   cp libFPXML32.so libFPXML32.so.SDK3.2
   cp libPAI_module32.so libPAI_module32.so.SDK3.2
   HP-UX:
   cd /fnsw/lib/shobj
   cp libFPLibrary.sl libFPLibrary.sl.SDK3.2
   cp libFPCore32.sl libFPCore32.sl.SDK3.2
   cp libFPParser32.sl libFPParser32.sl.SDK3.2
   cp libFPStreams32.sl libFPStreams32.sl.SDK3.2
   cp libFPUtils32.sl libFPUtils32.sl.SDK3.2
   cp libFPXML32.sl libFPXML32.sl.SDK3.2
   cp libPAI_module32.sl libPAI_module32.sl.SDK3.2
   Solaris:
   cd /fnsw/lib/shobj
   cp libFPLibrary.so libFPLibrary.so.SDK3.2
   cp libFPCore32.so libFPCore32.so.SDK3.2
   cp libFPParser32.so libFPParser32.so.SDK3.2
   cp libFPStreams32.so libFPStreams32.so.SDK3.2
   cp libFPUtils32.so libFPUtils32.so.SDK3.2
   cp libFPXML32.so libFPXML32.so.SDK3.2
   cp libPAI_module32.so libPAI_module32.so.SDK3.2
   Windows:
   cd /fnsw/lib/shobj
   ren FPLibrary.dll FPLibrary.dll.SDK3.2
   ren FPCore.dll FPCore.dll.SDK3.2
   ren FPParser.dll FPParser.dll.SDK3.2
   ren FPStreams.dll FPStreams.dll.SDK3.2
   ren FPUtils.dll FPUtils.dll.SDK3.2
   ren FPXML.dll FPXML.dll.SDK3.2
   ren PAI_module.dll PAI_module32.dll.SDK3.2


6. Copy the renamed Centera 3.3 SDK files to /fnsw/lib/shobj
   AIX:
   cp -f libPAI_module32.a libFPXML32.a libFPUtils32.a libFPStreams32.a libFPParser32.a   libFPCore32.a libFPLibrary.a /fnsw/lib/shobj
   HP Itanium:

   cp -f libPAI_module32.so libFPXML32.so libFPUtils32.so libFPStreams32.so libFPParser32.so  libFPCore32.so libFPLibrary.so /fnsw/lib/shobj

   HP-UX:
   cp -f libPAI_module32.sl libFPXML32.sl libFPUtils32.sl libFPStreams32.sl libFPParser32.sl   libFPCore32.sl libFPLibrary.sl /fnsw/lib/shobj

   Solaris:

   cp -f libPAI_module32.so libFPXML32.so libFPUtils32.so libFPStreams32.so libFPParser32.so   libFPCore32.so libFPLibrary.so /fnsw/lib/shobj
   Windows:
   copy PAI_module.dll FPXML.dll FPUtils.dll FPStreams.dll FPParser.dll FPCore.dll FPLibrary.dll  to /fnsw/lib/shobj
7. Start Image Services using this command: initfnsw start


8. Set permission for the copied files using these commands:
   • For Unix: fn_setup -d /
   • For Windows: fn_perm
9. Ensure that the Centera 3.3 SDK files are being used.
   • Open the current elog is located at: /fnsw/local/logs/elogs/elogsYYYYMMDD
   • Check the SDK version number of SDS_worker X X.
       Example:
       2019/03/12 04:01:17.331 238,0,1 <fnsw> SDS_worker 13 1  (13172898.1.226 0xc900a2.1) ... [INFO]
       Logon to: 'cas.ecstestdrive.com?/fnsw/local/sd/1/ecs31.pea' Repository
       Dynamic Connector library: 'SDSw_centera'
       Device specific info: 'ECS (version 3-3000-0-0) libSDSw Ver=1.0,
       Mode=ce, SDK v3.3.721 (Dec 12 2016 17:25:39)'
       Capacity: 1024.000000GB (1073741824KB)
       Used:     2.666084GB (2795592KB) (0.26%)
       Free:     1021.333916GB (1070946232KB) (99.74%)
       Supports EBR=YES holds=YES retention_extend=YES