IBM uEFI update (Linux) - IBM System x3620 M3/3630 M3

Download Description

• IBM ServerProven

IBM 7376/7377 (IBM system x 3620 M3/3630 M3 Server) uEFI Flash Update Version 1.06 (BuildID:HSE117BUS) - Critical
Change History
Problem(s) Fixed:
1. System shuts down automatically while running warm boot test 2. Network Settings have not been saved if reset IMM immediately 3. Can't get memory error de-assert event on yuoo90a 4. IMM backup flashing behavior is misleading
5. Fixed that set ASPM will cause IOU config uncorrect issue Enhancements:
1. Generic flash driver update to support absolute reads using chip offsets Limitations:
Dependencies:
-------------------------------------------------------------------------- Version 1.05 (BuildID:HSE117AUS) - Suggested (Be aware to check the change history for any critical updates) Change History
Problem(s) Fixed:
1. Update VPD extraction from IMM to strip trailing blanks from buildid 2. Fixed that SMBIOS HCT fail under WS08 DC R2 x64 Enhancements:
1. Add out-of-band PXE configuration
2. Renaming of output files to add version information 3. Re-enable disabled DIMM while AC power cycle
4. Reverse F1 setup Event Log number order and change the number format.
5. Update iMM flash utility version to v1.11.02
6. Set SLP1OEMString_x to be protected
Limitations:
Dependencies:
-------------------------------------------------------------------------- Version 1.04 (BuildID:HSE116CUS) - Critical
Change History
Problem(s) Fixed:
1. Fixed that Primary Boot order can not delete more than 7 options at the same time 2. Fixed that Transer mode of CDROM is PIO mode under WS03 x86 and x64 3. To correct an IntelR XeonR 5600 series processor's internal circuit marginality issue, that could cause false memory errors when the C6-state is enabled 4. Fixed that system can not execute ASU SHOW ALL command with OEM build & ASU 3.61.70I 5. Fixed that flash fail from uEFI HSE116B to HSE111A Enhancements:
1. Add IMM IP6 enablement code to setup menu
2. Update Intel Westmere Memory Reference Code to V2.21 3. Update Intel Westmere QPI reference Code to V1.85 4. Dynamic to modify the IOAT device and PCI-E root port Time-Out value for Intel NIC card Limitations:
Dependencies:
-------------------------------------------------------------------------- Version 1.03 (BuildID HSE115BUS) - Suggested (Be aware to check the change history for any critical updates) Change History

Problem(s) Fixed:
Enhancements:
1. Update iMM flash utility version to v1.10.09
Limitations:
Dependencies:
------------------------------------------------------------------------- Version 1.02 (BuildID HSE115AUS) - Suggested (Be aware to check the change history for any critical updates) Change History

Problem(s) Fixed:
1. Fixed that enabled cores in Processor Details Summary is incorrect 2. Fixed that iMM HostName can not change under uEFI setup menu 3. Fixed that CPU which doesn't support Turbo mode but will show enable/disable in Performance/Acoustic/Power Efficiency mode 4. Fixed that load default setting in uEFI setup menu may cause some setting hidden when system restart 5. Fixed that cursor of mouse lag in Legacy LSI WebBIOS when memory configuration aets mirror mode 6. Fixed that System summary will auto display when user serurity set Power-On password Enhancements:
1. Memory Sparing Mode support (Only for Intel Xeon Processor 5600 series) 2. Low Voltage (1.35V) DIMM support (Only for Intel Xeon Processor 5600 series) Limitations:
Dependencies:
------------------------------------------------------------------------- Version 1.01 (BuildID HSE113BUS) - Critical

Problem(s) Fixed:
1. Fixed risk of data errors when using firmware SCSI stack.
Enhancements:
Limitations:
Dependencies:

------------------------------------------------------------------------- Version 1.00 (BuildID:HSE110AUS)

Problem(s) Fixed:
- Initial Release

Enhancements:
Limitations:
Dependencies: