Download
Version
10.35.35.40
Release Date
17 March 2009
Downloadable File
File link | File size | File description |
---|---|---|
3,974 | CHANGE HISTORY for the IBM DS3000 Storage Manager for Windows Server 2003 and 2008 (64-bit) | |
59,317 | README for the IBM DS3000 Storage Manager for Windows Server 2003 and 2008 (64-bit) | |
244,227,325 | IBM DS3000 Storage Manager for Windows Server 2003 and 2008 (64-bit) |
Abstract
Download the latest IBM DS3000 Storage Manager for Windows Server 2003 and 2008 (64-bit)
Download Description
Severity: Suggested
Change history
Version 10.35.x5.40
IBM System Storage DS3000 Storage Manager Installer package version 10.35.35.40 for use in Windows Server 2003 and Windows Server 2008 operating system environments only.
Issues resolved:
- Unable to create host ports and mappings via the SMCLI
- Activation Failures during upgrade from 06.70.xx.xx to 07.35.41.00 on non-English Windows OS
Version 10.35.x5.35
- Added Storage Manager Client support for DS3000 Controller Firmware v07.35.41.xx.
- Added the ability to create Arrays with out having to define Logical Drives.
- Added an advanced controller cache battery learn cycle. This feature will perform a periodic learn cycle to determine the full recharge capacity of each battery.
- Support Bundle Collected on Critical Events. Upon occurrence of a critical event, the monitor will save the support bundle to the local hard drive of the client system in the same area as used for other recovery information. This information will not be overwritten for at least 72 hours.
- Solaris 10 support. Solaris 10 will be supported as an I/O attach only solution. The failover mechanism will be MPXIO (native to the OS).
- Added feature that will all user to Import and Export Arrays. This feature will import or export all Array features and data but will not import any premium feature keys.
- Configurable failed drive replacement. The user will be allowed to specify that a hot spare (thus eliminating the copyback operation) or an unassigned drive be a permanent member of the array.
- Support for IPv6 on the controller management Ethernet ports.
- Support Telnet protocol on the controller management Ethernet ports.
- Added a pre-read redundancy check. Enable verification of redundant RAID data consistency before returning the requested read data back to the host. This feature should be enabled on a logical drive basis. It will automatically be disabled when a logical drive is degraded. If a mismatch is detected, the controller will return a Media error - unrecoverable read error (03/11/00). The subsystem will not attempt to correct or recalculate parity automatically. This will support all RAID levels.
- Added support for Red Hat v5.2 and SLES10 SP2.
- Create Unmanageable Icon. Create a new icon in the EMW to differentiate between Unresponsive and Unmanageable. The unmanageable would be any Controller Subsystem for which there isnt the corresponding JAR file.
Version 02.72.x5.05
- Added Storage Manager Client support for DS3000 Controller Firmware v06.70.69.xx.
- Added support for Windows Server 2008
- Added support for AIX v6.1
Version 02.70.x5.15
- Added support for AIX and Linux on POWER host kits.
- Updated to allow for creation of arrays using SATA hard disk drives.
- Maintenance release of DS3000 for multiple issues discovered in additional testing
Version 02.70.x5.05
- Added support for the BladeCenter Boot Disk Systems
Version 02.50.x5.03
- Added support for the DS3300 storage subsystems.
Version 02.17.x5.05
- Maintenance release of DS3000 Storage Manager version 02.17.x5.05 to support dual controller configurations with the DS3200 and DS3400 storage subsystems.
Version 02.17.x5.02
- Initial release of DS3000 Storage Manager version 02.17.x5.02 to support the new DS3200 and DS3400 storage subsystems.
Off
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03HGT","label":"System x->System x iDataPlex dx340 server->7832"},"Platform":[{"code":"PF033","label":"Windows"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU03HHA","label":"System x->System x iDataPlex dx340 server->4668"},"Platform":[{"code":"PF033","label":"Windows"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU03HHF","label":"System x->System x iDataPlex dx340 server->7834"},"Platform":[{"code":"PF033","label":"Windows"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03MLK","label":"System x->System x iDataPlex dx360 server->7833"},"Platform":[{"code":"PF033","label":"Windows"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU03OBI","label":"System x->System x iDataPlex dx340 server->6389"},"Platform":[{"code":"PF033","label":"Windows"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU03OBK","label":"System x->System x iDataPlex dx360 server->6390"},"Platform":[{"code":"PF033","label":"Windows"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU03OQJ","label":"System x->System x iDataPlex dx360 server->6316"},"Platform":[{"code":"PF033","label":"Windows"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
20 August 2015
UID
ibm1MIGR-5079595