Product Documentation
Abstract
Hard disk drive and Solid State drive part numbers for IBM Flex System p260 Compute Node
Content
- See ServerProven for hard disk drive and solid state drive compatibility
- See Configuration and Options Guide (COG) for all parts that are configurable with this system
| Description | Marketing part number | Replacement part number | CRU/FRU type |
|---|---|---|---|
| 300 GB 10 000 rpm non-hot-swap 6 Gbps SAS | 42D0627 | 42D0628 | |
| 600 GB 10 000 rpm non-hot-swap 6 Gbps SAS | 49Y2022 | 49Y2023 | |
| 900 GB 10 000 rpm non-hot-swap 6 Gbps SAS | 81Y9654 | 81Y9655 | |
| 177 GB SATA non-hot-swap SSD | 74Y9114 | 74Y9115 |
Notes:
- If HDDs are chosen, then only very-low-profile (VLP) DIMMs can be used because of internal spacing. There is not enough room for the 2.5-inch drives to be used with low-profile (LP) DIMMs. Verify your memory choice to make sure it is compatible with the local storage configuration.
- The use of SSDs does not have the same limitation, and LP (or VLP) DIMMs can be used with SSDs.
- If you use local drives, you will need to order the appropriate cover with connections for your desired drive type.
- The maximum number of drives that can be installed is two.
- SSD and HDD drives cannot be mixed.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU050","label":"BU NOT IDENTIFIED"},"Product":{"code":"QU91NSI","label":"PureFlex System and Flex System->p260 Compute Node->7895"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5090319