Fix Pack installation Instructions for the IBM Business Process Manager V8.0.1 Fix Pack 1 (V8.0.1.1) products

This fix pack is a cumulative maintenance package for a specific product and applies to all distributed operating systems. It is a single package that bundles a number of individual fixes.

V8.0.1 Fix Pack 1 is intended to be used on IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, and IBM Business Process Manager Advanced - Process Server installations.

By installing V8.0.1 Fix Pack 1, you will raise the fix level of your product, either IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, or IBM Business Process Manager Advanced - Process Server, to V8.0.1 Fix Pack 1.

Table of Contents

• About fix pack and prerequisites
• Problems addressed in this fix pack
• Fix pack prerequisites
• Installing the fix pack
• Upgrade instructions for installations with existing profiles
• Installing V8.0.1 Fix Pack 1 (8.0.1.1)
• Upgrading the Process Designer
• Fix pack install verification
• Rolling back V8.01 Fix Pack 1 (8.0.1.1)
• Additional information
• Reference
• Trademarks and service marks

© Copyright International Business Machines Corporation 2013. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.


About fix pack and prerequisites

Problems addressed in this fix pack

The fixes addressed in V8.0.1 Fix Pack 1 are explained in the Fix List for Business Process Manager products document.

Fix pack prerequisites

To use this fix pack, you must have one the following versions of IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, or IBM Business Process Manager Advanced - Process Server installed:

• 8.0.0.0
• 8.0.1.0

You must also either have the following levels for the WebSphere Application Server Fix Packs installed or must install the following levels of the WebSphere Application Server Fix Packs during the upgrade:

• WebSphere Application Server V8.0.0 Fix Pack 5 (must be downloaded using FTP)
• Fix pack image for all operating systems and platforms.

When you decompress the following two files to the same location, it creates the full WebSphere Application Server V8.0.0 Fix Pack 5 repository that includes all WebSphere Application Server offerings for all supported operation systems and architectures:

• 8.0.0-WS-WAS-FP0000005-part1.zip 1.28 GB
• 8.0.0-WS-WAS-FP0000005-part2.zip 1.04 GB

Hardware and software prerequisites for IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, and IBM Business Process Manager Advanced - Process Server are available on the web on their respective Hardware and Software Support pages.



Installing the fix pack

Upgrade instructions for installations with existing profiles

If you have been using IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, or IBM Business Process Manager Advanced - Process Server V8.0.0.0 or V8.0 Refresh Pack 1 and you have created profiles, additional steps are required. Also, if you installed the product using the Typical installation, a profile was created and you need to follow these steps. These steps include backing up the profile, stopping all Java™ processes, and sequencing the upgrade. Before you continue with the fix pack installation, follow the appropriate documentation for details and Return to this document, when instructed, to complete the Version 8.0.1 Fix Pack 1 installation.

Important:
Depending on the source version and topology, instructions for updating the database varies. The product might not continue to run successfully if you do not follow the instructions.

• Installing Version 8.0 Refresh Pack 1 and Version 8.0.1 Fix Pack 1 at the same time
  If you are upgrading the environment from an IBM Business Process Manager 8.0.0 product and are installing the IBM Business Process Manager V8.0 Refresh Pack 1 and V8.0.1 Fix Pack 1 at the same time, follow the instructions provided in the information center for Upgrading from IBM Business Process Manager V8.0 to IBM Business Process Manager V8.0.1. The refresh pack upgrade instructions are sufficient to update your profiles and database to the latest fix pack level. You do not have to repeat the steps for IBM Business Process Manager Version 8.0.1 Fix Pack 1 profile upgrade instructions.
• Upgrading from Version 8.0 Refresh Pack 1 to Version 8.0.1 Fix Pack 1
  If you are upgrading the environment from an IBM Business Process Manager 8.0.1 product to V8.0.1 Fix Pack 1, follow the upgrading the existing profiles information in the Profile upgrade instructions for IBM Business Process Manager Version 8.0.1 Fix Pack 1 (V8.0.1.1) document.

Installing V8.0.1 Fix Pack 1 (8.0.1.1)

If you have existing profiles under this installation, before you continue with the fix pack installation, see Profile upgrade instructions for IBM Business Process Manager Version 8.0.1 Fix Pack 1 (V8.0.1.1) for details on the steps to follow for the various topologies. Return to this document, when instructed, to complete the Version 8.0.1 Fix Pack 1 installation.


Download repositories to local system
The IBM Installation Manager must be at a minimum level of Version 1.6.0 before starting the IBM Business Process Manager 8.0.1 Fix Pack 1 installation updates. The Installation Manager detects an available update if you are connected to the Internet on the workstation that you are planning to complete the Business Process Manager 8.0.1 Fix Pack 1 update activities. WebSphere Application Server V8.0.0 Fix Pack 5 is a prerequisite to the IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, or IBM Business Process Manager Advanced - Process Server V8.0.1 Fix Pack 1.

If the machine where you are upgrading the product has Internet access, skip the following steps.

Important note: Even if you have Internet access, you might be unable to connect to the live repositories, which contain the fix pack and any required fixes. For more information on how to work around this issue, see the You cannot connect to the IBM Business Process Manager or IBM Business Monitor V8.0.1 service repository during an update or a custom installation document. You can also use the following steps and download the repository locally.

1. If the Installation Manager is version is lower than Version 1.6.0, download the latest copy of the Installation Manger 1.6.x from the IBM Installation Manager download site.
   
   
2. Download the appropriate V8.0.1 Fix Pack 1 from the download site. Download the applicable package for your installation from the following list to a temporary disk location:
   
   
• bpmExp.8011.repository.zip (for IBM Business Process Manager Express)
• bpmStd.8011.repository.zip (for IBM Business Process Manager Standard)
• bpmAdv.8011.repository.zip (for IBM Business Process Manager Advanced)
• bpmAdvPS.8011.repository.zip (for IBM Business Process Manager Advanced - Process Server)
  
  
3. Download and install WebSphere Application Server Version 8.0.0 Fix Pack 5, if it is not yet installed. IBM Business Process Manager no longer bundles the WebSphere Application Server fix pack. This fix pack, which is required for IBM Business Process Manager, is available through Fix Central.
   
   
   When you decompress the following two files to the same location, it creates the full WebSphere Application Server V8.0.0 Fix Pack 5 repository that includes all WebSphere Application Server offerings for all supported operation systems and architectures:
   
   
   8.0.0-WS-WAS-FP0000005-part1.zip 1.28 GB
   8.0.0-WS-WAS-FP0000005-part2.zip 1.04 GB
   
   
4. If you do not already have IBM Business Process Manager or IBM Business Monitor V8.0.1 already installed, then download only the WebSphere Application Server required interim fix repositories from the Required interim fixes for IBM Business Process Manager and IBM Business Monitor download document.
   
   
5. Unpack the repositories to any directories that you choose. Note where you have unpacked the repositories. You should unpack each repository to its own directory.

You can install the fix packs by using one of the following options:
Graphical user interface (GUI) of IBM Installation Manager to update an installation
Command line interface of IBM Installation Manager for a silent installation

Graphical user interface (GUI) of IBM Installation Manager to update an installation

1. Start the Installation Manager.
   
   
   On Windows operating systems with Internet access, you can click Start > Programs > IBM > IBM_BUSINESS_MANAGER_PRODUCT > Update. Then, skip to step 3b.
   
   
   If you do not have Internet access or are on a Linux or UNIX-based system, you can start IBM Installation Manager using the install_location/IBMIM command and the install_root\IBMIM.exe command on Windows operating systems. See Installation directories for the product and profile for more information on where Installation Manager is installed.
   
   
   Note: On the Microsoft Windows 7, Windows Vista, or Windows 2008 operating systems, right-click <install_root>\IBMIM.exe and select Run as administrator.
   
   
2. Add repositories to the IBM Installation Manager preferences.
   
   
   Click File > Preferences. Under Repositories, select one of the following options:
• If you have Internet access, ensure that the Search service repositories during installation and updates option is selected.
  
  
• If the you do not have an Internet connection, add the location of all the local repositories that you downloaded from the Download repositories to local system section.
1. Click Add Repository.
   
   
2. Type or browse to the repository.config file for the IBM Business Process Manager repository that you have unpacked.
   
   
3. Click OK.
   
   
4. Repeat this process for the interim fix repositories and the WebSphere Application Server fix pack repository, if necessary.
   
   
5. Click OK to save the new repository settings.
   
   
3. Use the following steps to graphically install:
1. Click Update.
   
   
2. Select the Package Group where you have installed IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, or IBM Business Process Manager Advanced - Process Server.
   
   
3. Click Next > to continue.
   
   
   After Installation Manager checks the service repositories, the Update Packages window opens and the IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, or IBM Business Process Manager Advanced - Process Server Version 8.0.1 Fix Pack 1 is shown (unless there is a later fix pack available from the live update repository).
   
   
   If you are also installing WebSphere Application Server Version 8.0.0 Fix Pack 5, it is also shown.
   
   
4. Ensure that these fix packs are all selected and then click Next >. If you have Internet connectivity or have added local Interim fix repositories, another Update Packages window opens. A list of interim fixes is displayed.
   
   
5. Ensure that the interim fixes are all selected and then click Next > to continue. The Licenses window opens.
   
   
6. Read and accept the terms of the license agreements by selecting the appropriate button and click Next > to continue. The Features window opens. All of the installed features will be selected.
   
   
7. Click Next > to continue. The Summary window opens. All of the features that need to be updated are shown. The disk space required to perform the update is shown at the bottom.
   
   
8. Click Update to start the update. The updates are downloaded either from the live update repository or from your local repository. The updates are installed. After the installation of the updates is complete, you receive a confirmation.

Note: During a full installation when you have Internet access, follow the normal install instructions for a full installation. Go to  Install Packages >  Check for Other Versions and Extensions. All of the latest versions are discovered. Follow the instructions to select the  Show all versions check box, then proceed with the full installation as normal. 

Command line interface of IBM Installation Manager for a silent installation

Installation Manager offers a command-line interface to silently update your product installation.

1. Use the following command to update your IBM Business Process Manager product to V8.0.1 Fix Pack 1:
   
   
   IM_INSTALL_LOCATION/tools/imcl install OFFERING_IDS FIX_IDS -acceptLicense -installationDirectory INSTALL_DIR -repositories REPOSITORIES -log LOG_FILE
   
   
   Update the variables in the previous command specifically for your installation using the following information:
   
   
• IM_INSTALL_LOCATION
  This variable represents the location where Installation Manager is installed. See Installation directories for the product and profile for more information on Installation Manager default install directories.
  
  
• OFFERING_IDS
  This variable represents the list of offerings to be updated. Offering IDs are separated by spaces. Use the following list to get the correct offering IDs for your product.
  
  
• IBM Business Process Manager Express
  com.ibm.bpm.EXP.V80
  com.ibm.websphere.nd.v80
• IBM Business Process Manager Standard
  com.ibm.bpm.STD.V80
  com.ibm.websphere.nd.v80
• IBM Business Process Manager Advanced
  com.ibm.bpm.ADV.V80
  com.ibm.websphere.nd.v80
• IBM Business Process Manager Advanced - Process Server
  com.ibm.bpm.PS.V80
  com.ibm.websphere.nd.v80
  
  
• FIX_IDS
  This variable represents the interim fix IDs for any interim fixes that you need to install. If you have already installed the interim fixes for WebSphere Application Server V8.0.0 Fix Pack 5, you can leave out the Fix IDs. The Fix IDs are:
  8.0.0.0-WS-WAS-IFPM75937
  8.0.0.3-WS-WAS-IFPM75338
  8.0.0.3-WS-WASND-IFPM75877 
  
  
• INSTALL_DIR
  This variable represents the installation directory of the product.
  
  
• REPOSITORIES
  This variable represents the location of the fix pack and interim fix repositories.
  
  
  Note: Use commas to separate multiple locations.
  
  
• LOG_FILE
  This variable represents the location and name of the silent log file to write.
  
  
  By including the -acceptLicense parameter, you agree to the terms and licenses of this product.
  
  
2. After updating the command for your environment, run the command from the tools directory under the Installation Manager install location.
   
   The following command is an example where the WebSphere Application Server fix pack and interim fixes also need to be applied:
   C:\Program Files (x86)\IBM\Installation Manager\eclipse\tools\imcl install com.ibm.bpm.PS.V80 com.ibm.websphere.nd.v80 8.0.0.0-WS-WAS-IFPM75937 8.0.0.3-WS-WAS-IFPM75338 8.0.0.3-WS-WASND-IFPM75877 -acceptLicense -installationDirectory C:\IBM\BPM\v8.0 -repositories C:\BPM8011_repository,C:\WAS8005_repository,C:\WAS8005_iFix_repository -log silent_update.txt
   
   The following command is an example where only the IBM Business Process Manager fix pack needs to be applied:
   C:\Program Files (x86)\IBM\Installation Manager\eclipse\tools\imcl install com.ibm.bpm.PS.V80 -acceptLicense -installationDirectory C:\IBM\BPM\v8.0 -repositories C:\BPM8011_repository -log silent_update.txt
3. When the silent fix pack installation completes, check the logs to ensure that the installation completes successfully. A success message that is similar to the following text displays on the command line:
   
   Updated to com.ibm.bpm.PS.V80_8.0.1001.20130110_0349 in the C:\IBM\BPM\v8.0 directory.
   

For additional information about silent installations, visit the Information Center links in the following table:

Product	Content Links
IBM Business Process Manager Express	AIX Linux Windows
IBM Business Process Manager Standard	AIX Linux Solaris Windows
IBM Business Process Manager Advanced	AIX Linux Solaris Windows
IBM Business Process Manager Advanced - Process Server	AIX Linux Solaris Windows

Alternatively, you can use the Interactive Installation and Configuration Guide and follow the instructions. 

Upgrading the Process Designer

After you update your Process Center with a fix pack, refresh pack, or interim fix, you must update the Process Designer to the same level. To make the updates, download the Process Designer file again and run the installation. Only the fixes or changes are applied.


About this task

When you install the fix pack, refresh pack, or interim fix, the IBM Process Designer.zip file is also updated. You must download it and install the updated Process Designer to the directory where you already installed Process Designer.


Procedure

1. Open the Process Center.
   
   
2. Click the IBM Process Designer Download option.
   
   
3. When you are prompted, save the IBM Process Designer.zip file to your file system. This file contains everything that you need to install and run IBM Process Designer. Depending on your network connection, the download might take several minutes to complete.
   
   
4. Extract the contents of the IBM Process Designer.zip file to a temporary directory on your file system.
   
   
5. Open a command window and change to the directory where you extracted the contents of the IBM Process Designer.zip file.
   
   
   Important: If you are running Microsoft Windows 7, Windows Vista, or Windows Server 2008, right-click on the command prompt and select Run as administrator.
   
   
6. Run one of the following commands to update the Process Designer. Use the same command that you used to install the Process Designer.
• Default location (C:\IBM\ProcessDesigner\v8.0)
• installProcessDesigner_admin.bat
• installProcessDesigner_nonadmin.bat
  
  
• Different location
• installProcessDesigner_admin.bat install_location 
• installProcessDesigner_nonadmin.bat install_location
  
  
If the location has spaces in the directory name, put the whole location in quotation marks. The following examples show how to install to a different location.
• installProcessDesigner_admin.bat D:\IBM\PD
• installProcessDesigner_admin.bat "D:\Process Designer\"

Results
IBM Process Designer is updated. Only the fixes or changes are applied.

Installation messages are recorded in the %TEMP%\IBMProcessDesignerInstall.log file, where the %TEMP% variable is typically set to C:\Documents and Settings\current_user_name\Local Settings\Temp.

Fix pack install verification

For upgrades of installations with existing profiles, refer to the Identifying profile update errors section under the Profile upgrade tab for details on verifying the fix pack installation.

Note: Installation Manager on the Microsoft Windows operating system does not recognize profile update errors. When you upgrade an installation on Windows, you must look at the Identifying Profile Update Errors section, even if Installation Manager ends with the following message: The packages are updated.

Rolling back the V8.0.1 Fix Pack 1 (V8.0.1.1)

You can roll back the fix pack to a previous version, by using one of the following options:
Graphical user interface (GUI) of IBM Installation Manager to roll back an installation
Command line interface of IBM Installation Manager for a silent roll back of a fix pack

Note: The following procedure only rolls back the product binary. Any existing profiles that were upgraded during a fix pack installation are not rolled back; you must restore the profiles from the backup you took before you upgraded the product. Any new profiles created after the upgrade cannot be reused; you must delete and recreate the profiles after you have completed the rollback.


Graphical user interface (GUI) of IBM Installation Manager to rollback an installation

1. Close all programs that were installed using Installation Manager before rolling back.
   
   
2. Start Installation Manager. See Installation directories for the product and profile for more information on where Installation Manager is installed.
   
   
3. From the Start page of the Installation Manager, click Roll back to start the Roll back packages wizard.
   
   
4. On the Roll Back Packages page, from the Package Group Name list, select the package group that contains the packages that you want to roll back and click Next.
   
   
5. Select the version of the package to which you want to roll back and click Next.
   
   
6. Read the summary information and click Roll Back to roll back the package.
   
   
   When the rollback process completes, a message that confirms the success of the process is displayed near the top of the page.
   
   
7. Optional: Click View log file to open the log file for the current session in a new window.
   
   
8. Click Finish to close the wizard.
   
   
9. Close Installation Manager.
   
   
10. Restore the backed up data from the original version.

Command line interface of IBM Installation Manager for a silent roll back of a fix pack

Installation Manager offers a command-line interface to silently rollback your product installation to the previous version. In the instructions, it is assumes that you completed all of the necessary profile, database, and fix pack-specific data backup tasks, which are described in Profile upgrade instructions, before you migrated to Version 8.0.1 Fix Pack 1. This data is restored after you complete the roll back task.

1. Use the following command to roll back your IBM Business Process Manager product to V8.0.0.0 or V8.0.1.0.
   
   
   IM_INSTALL_LOCATION/tools/imcl rollback OFFERING_ID VERSION -installationDirectory INSTALL_DIR -log LOG_FILE
   
   
   Update the following variables for your installation:
• IM_INSTALL_LOCATION
  This variable represents the location where Installation Manager is installed. See Installation directories for the product and profile for more information on Installation Manager default install directories.
  
  
• OFFERING_ID
  This variable represents the offering ID of the product installed.
  
  
• VERSION
  This variable represents the original version of the product. Rolling back returns your installation to this version. This version might be Version 8.0.0.0 or Version 8.0.1.0. If you have upgraded directly from Version 8.0.0.0 to Version 8.0.1 Fix Pack 1, see the Details for rolling back to Version 8.0.0.0 information. If you have upgraded from Version 8.0.1, see the Details for rolling back to Version 8.0.1.0 information.
  
  
• Details for rolling back to Version 8.0.0.0
• IBM Business Process Manager Express
  Offering ID: com.ibm.bpm.EXP.V80
  Version: 8.0.0.20120504_0134
• IBM Business Process Manager Standard
  Offering ID: com.ibm.bpm.STD.V80
  Version: 8.0.0.20120504_0135
• IBM Business Process Manager Advanced
  Offering ID: com.ibm.bpm.ADV.V80
  Version: 8.0.0.20120504_0137
• IBM Business Process Manager Advanced - Process Server
  Offering ID: com.ibm.bpm.PS.V80
  Version: 8.0.0.20120504_0137
  
  
• Details for rolling back to Version 8.0.1.0
• IBM Business Process Manager Express
  Offering ID: com.ibm.bpm.EXP.V80
  Version: 8.0.1000.20121102_2132
• IBM Business Process Manager Standard
  Offering ID: com.ibm.bpm.STD.V80
  Version: 8.0.1000.20121102_2134
• IBM Business Process Manager Advanced
  Offering ID: com.ibm.bpm.ADV.V80
  Version: 8.0.1000.20121102_2136
• IBM Business Process Manager Advanced - Process Server
  Offering ID: com.ibm.bpm.PS.V80
  Version: 8.0.1000.20121102_2136
  
  
• INSTALL_DIR
  This variable represents the installation directory of the product.
  
  
• LOG_FILE
  This variable represents the location and name of the silent log to write.
  
  
2. After updating the command for your environment, run the command from the tools directory under the Installation Manager install location.
   
   The following command is an example:
   
   C:\Program Files (x86)\IBM\Installation Manager\eclipse\tools\imcl rollback com.ibm.bpm.EXP.V80_8.0.0.20120504_0134 -installationDirectory C:\IBM\BPM\v8.0 -log silent_rollback.txt
   
   
3. When the rollback completes, check the log files to ensure that the rollback completed successfully. A success message displays on the command line:
   
   Rolled back to com.ibm.bpm.EXP.V80_8.0.0.20120504_0134 in the C:\IBM\BPM\v8.0 directory.
   
   
4. Restore the profile and the data base to backed up taken prior to installing the fix pack 1.
   

Additional information

Reference

You can find additional information on any of these topics in the IBM Business Process Manager Information Center.

For further information on the update strategy or obtaining updates, see the support page for your product.

IBM Business Process Manager Express Support page
IBM Business Process Manager Standard Support page
IBM Business Process Manager Advanced Support page
IBM Business Process Manager Advanced Process Server Support page
Trademarks and service marks:
For trademark attribution, visit the IBM Terms of Use Web site.