Product Documentation
Abstract
Features: The following list summarizes the features of the Netfinity 3500-M10 - Type 8655.
Content
SourceHardware Maintenance Manual
Features
The following list summarizes the features of the Netfinity 3500-M10 - Type 8655.
Microprocessor
- Intel Pentium III microprocessor
- 512 KB L2 cache memory
Memory
- Four 3.3 V, synchronous, 168-pin, dual in-line memory module (DIMM) sockets
- Installed: synchronous dynamic random access memory (SDRAM) error correcting code (ECC), 100 MHz DIMMs.
- Expandable to 1 GB of SDRAM
- Support for:
- - 64 MB, 128 MB, and 256 MB DIMMs in either single-sided or double-sided configurations
- - DIMM heights up to 2.5 inches
- Flash memory for system programs
Internal Hard Disk Drives
- Standard: One SCSI hard disk drive
- Maximum SCSI devices: Four slimline hard disk drives
Removable Media Drives
- Standard: One 3.5-inch, 1.44 MB diskette drive
- Maximum: One diskette drives and one tape backup
CD-ROM Drive
- One IDE CD-ROM drive
Expansion
- Six drive bays
- Six expansion slots (one dedicated AGP, four dedicated PCI, and one shared ISA/PCI)
- Support for PCI/ISA Plug and Play adapters
- Support for dual microprocessors
- Support for additional internal and external SCSI devices
- Support for 3.5-inch, 1.44 MB diskette drive; internal tape drive
- Support for IBM Netfinity ServeRAID adapter
Power
- 330 W, 115/230 V ac, 50/60 Hz
- Automatic ac voltage sensing
- Built-in overload and surge protection
- Advanced Power Management
Security
- Power-on and administrator passwords
- Lockable cover
- Bolt-down capability
- Chassis-intrusion detection
- Startup sequence control
- Startup without diskette drive, keyboard, or mouse
- Unattended start mode
- Control access to diskette, hard disk, serial port, parallel port
Integrated functions
- Ethernet controller
- - 10Base-T and 100Base-TX connectivity
- ECP/EPP parallel port
- Two 16550 UART serial ports
- Two USB ports
- Mouse port
- Keyboard port
- Monitor port (on graphics adapter)
- Ethernet RJ-45 port
System Management
- RPL (remote program load) and DHCP (dynamic host configuration protocol)
- Update POST and BIOS over the network
- Automatic power-on startup sequence
- Remote reset from LAN
Operating Systems (Supported)
- Microsoft Windows NT Server Version 4.0
- Novell Netware Version 4.x or 5.x
- SCO UnixWare
- OS/2 WARP Server SMP
The preceding information covers a variety of models. For a listing of features for your specific model, refer to the System Summary screen in the Configuration/Setup Utility program. For more information, see Viewing the System Summary
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HWN16","label":"Older System x->Netfinity 3500 M10"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-4ANS32