Product Documentation
Abstract
Features and specifications for the Netfinity 7100.
Content
The following provides a summary of the features and specifications for the Netfinity 7100 server.
Microprocessor
- Intel PentiumIII Xeon
- 32 KB of level-1 cache
- 512K of level-2 cache (min.)
- Expandable to four microprocessors
Memory
- Maximum: 16 GB
- Type: ECC, SDRAM, Registered DIMMs
- Slots: 4-way interleaved, 16 slots
Drives standard
- Diskette: 1.44 MB
- CD-ROM: 40X IDE
Expansion bays
- Hot-swap: 10 slim high or 7 half high
- Non-hot-swap: Two 5.25-inch
PCI expansion slots
- Four 33 MHz / 64-bit
- Two 66 MHz / 64-bit
Hot-swap power supplies
250 W (115-230 V ac)
- Minimum: Two
- Maximum: Four
Cooling
- Four hot-swap fan assemblies
Video
- SVGA video controller
- S3 Trio3D Business Multimedia Accelerator
- 4 MB standard - no expansion, consists of two 16 Mbit, 100 MHz SGRAM modules (512 K x 32)
- 128 bit pipelined architecture 2D graphics engine
- Integrated 230 MHz RAMDAC and programmable dual clock synthesizer
- Connected to the PCI bus
- DDC2 monitor communications support
Size (Rack Model) (8U)
- Height: 356 mm (14 in.)
- Depth: 650 mm (25.6 in.)
- Width: 440 mm (17.3 in.)
- Weight: 34.4 kg (76 lb.) to 61 kg (134 lb.) depending upon configuration
Size (Tower Model)
- Height: 356 mm (14 in.)
- Depth: 700 mm (27.6 in.)
- Width: 483 mm (19 in.)
- Weight: 39 kg (86 lb.) to 55 kg (121 lb.) depending upon configuration
Integrated functions
- Netfinity Advanced System Management processor
- Dual Ultra-2 (LVD) SCSI controller (one external port, one internal port)
- One 10BASE-T/100BASE-TX AMD Ethernet controller
- Three serial ports (one reserved for system management)
- Two RS 485 ports
- One parallel port
- Two universal serial bus ports
- Keyboard port
- Mouse port
- Video port
Acoustical noise emissions
- Sound power, idling: 6.3 bel maximum
- Sound power, operating: 6.3 bel maximum
- Sound pressure, operating: 48 dBa maximum
Environment
Air temperature
- Server on: 10§ to 35§ C (50§ to 95§ F).
- Altitude: 0 to 914 m (3000 ft.)
- Server on: 10§ to 32§ C (50§ to 89.6§ F).
- Altitude: 914 m (3000 ft.) to 2133 m (7000 ft.)
- Server off: 10§ to 43§ C (50§ to 110§ F).
- Maximum altitude: 2133 m (7000 ft.)
Humidity
- Server on: 8% to 80%
- Server off: 8% to 80%
Heat output
Approximate heat output in British Thermal Units (BTU) per hour
- Minimum configuration:1023.9 BTU (0.3 kilowatts per hour)
- Maximum configuration: 2764.6 BTU (0.81 kilowatts per hour)
Electrical input
- Sine-wave input (50-60 Hz) required
- Input voltage low range:
- - Minimum: 90 V ac
- - Maximum: 137 V ac
- Input voltage high range:
- - Minimum: 180 V ac
- - Maximum: 265 V ac
- Input kilovolt-amperes (kVA) approximately:
- - Minimum: 0.08 kVA
- - Maximum: 0.52 kVA
Server features
The unique design of the server takes advantage of advancements in symmetric multiprocessing (SMP), data storage, and memory management. The server combines:
- Impressive performance using an innovative approach to SMP
The server supports up to four Pentium III Xeon microprocessors. The server comes with one microprocessor installed; you can install additional microprocessors to enhance performance and provide SMP capability.
- Large data-storage and hot-swap capabilities
All models of the server support up to 10 slim-high or 7 half-high hot-swap hard disk drives. This hot-swap
feature enables you to remove and replace hard disk drives without turning off the server.
- Large system memory
The memory bus in the server supports up to 16 GB of system memory. The memory controller provides error correcting code (ECC) support for up to 16 industry-standard, 3.3 V, 168-pin, 8-byte, registered, dual inline memory modules (DIMMs).
- System-management capabilities
The server comes with a Netfinity Advanced System Management Processor on the system board. This processor, in conjunction with the Netfinity Manager software provided on the ServerGuide CDs, enables you to manage the functions of the server locally and remotely. The Netfinity Advanced System Management Processor also provides system monitoring, event recording, and dial-out alert capability.
NOTE: The Netfinity Advanced System Management Processor is sometimes referred to as the service processor.
- Integrated network environment support
The server comes with an Ethernet controller. This Ethernet controller on the system board has an interface for connecting to 10-Mbps or 100-Mbps networks. The server automatically selects between 10BASE-T and 100BASE-TX. The controller provides full-duplex (FDX) capability, which enables simultaneous transmission and reception of data on the Ethernet local area network (LAN).
- Redundant network-interface card
The addition of an optional, redundant network interface card (NIC) provides a failover capability to a redundant Ethernet connection. If a problem occurs with the primary Ethernet connection, all Ethernet traffic
associated with this primary connection is automatically switched to the redundant NIC. This switching occurs without data loss and without user intervention.
- IBM ServerGuide CDs
The ServerGuide CDs included with the Netfinity server provide programs to help you set up the server and install the network operating system (NOS). The ServerGuide program detects the hardware options that are installed, and provides the correct configuration programs and device drivers. In addition, the ServerGuide CDs include a variety of application programs for the server.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HWN11","label":"Older System x->Netfinity 7100"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-4HWPEG