Troubleshooting
Problem
This document provides details on reason codes associated with message CPF1269.
Resolving The Problem
Sense codes returned by failed program start requests indicate that the remote system has rejected a request to do work on that system. When a program start request fails, the remote system will post message CPF1269 in the QSYSOPR message queue and the history log. Message CPF1269 contains a reason code that describes why the program start request failed. For operating systems running V2R3 or later, the meaning of the reason code is included in the message. Message CPF1267 will also contain the
same reason codes as the CPF1269.
Note: These reason codes can also appear in message CPF4805 on the source system of a transaction as well.
If the conversation is active and allows a response after the failure has been detected, an SNA FMH7 sense data will be sent to the remote system. Below is a list of the reason codes and sense data for rejected program start requests:
| Sense Data | Code | Reason Description |
| 084B6031 | 401 | Program start request received for a device that is not allocated to an active subsystem. |
| 084B6031 | 403 | User profile is not accessible. |
| 084B6031 | 404 | Job description is not accessible. |
| 084B6031 | 405 | Output queue is not accessible. |
| 084B6031 | 406 | Maximum number of jobs, defined by subsystem description, is already active. |
| 084B6031 | 407 | Maximum number of jobs, defined by communications entry, is already active. |
| 084B6031 | 408 | Maximum number of jobs, defined by routing entry, is already active. |
| 084B6031 | 409 | Library on library list is in use exclusively by another job. |
| 084B6031 | 410 | Group profile cannot be accessed. |
| 084B6031 | 412 | System job values not accessible. |
| 084B6031 | 413 | QSERVER subsystem not active. |
| 084C0000 | 501 | Job description is not found. |
| 084C0000 | 502 | Output queue is not found. |
| 084C0000 | 503 | Class is not found. |
| 084C0000 | 504 | Library on library list is not found. |
| 084C0000 | 505 | Job description or job description library is damaged. |
| 084C0000 | 506 | Library on library list is destroyed. |
| 084C0000 | 507 | Duplicate libraries are found on library list. |
| 084C0000 | 508 | Defined size of storage pool is zero. |
| 10086021 | 602 | Value of transaction program name is reserved but not supported. |
| 10086021 | 604 | Matching routing entry is not found. |
| 10086021 | 605 | Program was not found in the library you specified, or the program was not found in the default library list (QSYSLIBL). |
| 080F6051 | 704 | Password is not valid. |
| 080F6051 | 705 | User is not authorized to device. |
| 080F6051 | 706 | User is not authorized to subsystem description. |
| 080F6051 | 707 | User is not authorized to job description. |
| 080F6051 | 708 | User is not authorized to output queue. |
| 080F6051 | 709 | User is not authorized to program. |
| 080F6051 | 710 | User is not authorized to class // GRTOBJAUT for that user to this object. |
| 080F6051 | 711 | User is not authorized to library on library list // GRTOBJAUT for that user to this object. |
| 080F6051 | 712 | User is not authorized to group profile // GRTOBJAUT for that user to this object. |
| 080F6051 | 713 | User ID is not valid. |
| 080F6051 | 714 | Default user profile is not valid. |
| 080F6051 | 715 | Neither password nor user ID is provided, and no default user profile is specified in the communications entry. |
| 080F6051 | 722 | A user ID was received without a password. |
| 080F6051 | 723 | There is no password associated with the system user ID. |
| 080F6051 | 725 | User ID is not a valid IBM OS/400 or IBM i5/OS name. |
| 080F6051 | 726 | User profile disabled. |
| 080F6051 | 727 | Protected password invalid; either user ID or password was longer than 8 characters, or password created on release prior to V2R3. |
| 084B0000 | 728 | No OS/400 license available. |
| 084B6031 | 729 | Program start request received for SYNLVL (*COMMIT) conversation before exchange log names completed. |
| 084B60F1 | 730 | Password Expired - Check APPC Jobs |
| 10086031 | 801 | Program initialization parameters are present but not allowed. |
| 084B6031 | 802 | Program initialization parameter exceeds 2000 bytes. |
| 084B6031 | 803 | Subsystem is ending. |
| 084B6031 | 804 | Prestart job is inactive or is ending. |
| 084B6031 | 805 | WAIT (*NO) was specified on the prestart job entry, and no prestart job was available. |
| 084B6031 | 806 | The maximum number of prestart jobs that can be active on a prestart job entry was exceeded. |
| 084B6031 | 807 | Prestart job ended when a program start request was being received. |
| 10086032 | 901 | Program initialization parameters are not valid. |
| 10086032 | 902 | Number of parameters for program not valid. |
| 10086032 | 903 | Program initialization parameters required but not present. |
| 08640001 | 1001 | System logic error; function check or unexpected return code encountered. |
| 08640001 | 1002 | System logic error; function check or unexpected return code encountered while receiving initialization parameters. |
| 10086021 | 1501 | Character as procedure name is not valid. |
| 10086021 | 1502 | Procedure not found. |
| 084C0000 | 1503 | S/36 environment library not found. |
| 084C0000 | 1504 | Library QSSP not found. |
| 084C0000 | 1505 | File QS36PRC not found in library QSSP. |
| 10086021 | 1506 | S/36 Procedure or library is greater than 8 characters. |
| 084C0000 | 1507 | Current library no found. |
| 084C0000 | 1508 | Not authorized to current library. |
| 080F6051 | 1509 | Not authorized to Q36PRC in current library. |
| 080F6051 | 1510 | Not authorized to procedure in current library. |
| 080F6051 | 1511 | Not authorized to S/36 environment library. |
| 080F6051 | 1512 | Not authorized to file QS36PRC in S/36 environment library. |
| 080F6051 | 1513 | Not authorized to procedure in S/36 environment. |
| 080F6051 | 1514 | Not authorized to in library QSSP. |
| 080F6051 | 1515 | Not authorized to file QS36PRC in QSSP. |
| 080F6051 | 1516 | Not authorized to procedure in QS36PRC in QSSP. |
| 08640001 | 1517 | Unexpected return code from S/36 environment support. |
| 10086021 | 1518 | Problem phase program not found in QSSP. |
| 080F6051 | 1519 | Not authorized to problem phase program in QSSP. |
| 084B6031 | 1520 | Maximum number of target programs started (100 for S/36 environment). |
| 10086000 | 2001 | FMH5 length field is not correct. |
| 1008200E | 2002 | Concatenation flag not valid. |
| 10084001 | 2003 | FMH type is not 5. |
| 1008600B | 2004 | Command code field in FM header is not valid. |
| 10086009 | 2005 | Length for fixed-length fields not valid. |
| 10086034 | 2006 | Conversation type is not supported. |
| 10086040 | 2007 | Sync point is not supported. |
| 10086040 | 2008 | Reconnection is not supported. |
| 10086021 | 2009 | Field length of transaction program name not valid. |
| 10086005 | 2010 | Access code subfield length not valid. |
| 10086011 | 2011 | UOW-ID subfield length not valid. |
| 10086011 | 2012 | UOW-ID contents not valid. |
| 084B6031 | 2013 | Request device is currently being held by a Hold Communications Device (HLDCMNDEV) command. |
| 10086021 | 2014 | Transaction program name value is reserved but the LU service job is not active. |
| 10086040 | 2015 | LU service request received but the LU service job is not active. |
| 10086040 | 2016 | SECURELOC(*NO) specified and program start request indicated remote system did verification (AVI indicator). |
| 080F6051 | 2017 | No user ID is provided, but a password is sent. |
| 080F6051 | 2018 | No user ID is provided, but a profile ID is sent. |
| 080F6051 | 2019 | Remote system indicates it sent a verified user ID, but no user ID is provided. |
| 080F6051 | 2020 | Remote system sent a verified user ID, but also sent a password. |
| 080F6051 | 2021 | Remote system sent a user ID, which it had not verified, and failed to send a password. |
| 080F6051 | 2022 | Password received and system is a nonsecure system. |
| 080F6051 | 2023 | The length of the attach sequence number is incorrect. It must be either 0 or 8 characters long. |
| 10086055 | 2024 | The attach sequence number is required, but is not present in the FMH-5. |
[{"Product":{"code":"SWG60","label":"IBM i"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Component":"Communications-SNA","Platform":[{"code":"PF012","label":"IBM i"}],"Version":"Version Independent","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}}]
Historical Number
12703834
Was this topic helpful?
Document Information
Modified date:
18 December 2019
UID
nas8N1018306