Product Documentation
Abstract
Controls and LED status indicators for the PC Server 325
Content
Controls and status indicators
| CD-ROM Drive In-Use Light | This light comes on when the CD-ROM drive is accessed. |
| Diskette-Drive In-Use Light | This lights when the drive is accessing a diskette. |
| CD-ROM Eject Button | Push this button to release a CD from the CD-ROM drive. |
 Power-On Light | This green LED lights when you power-on the server by pressing the power switch, and when the server powers on in unattended mode. |
| Diskette Eject Button | Push this button to release a diskette from the drive. |
| Power Switch | Use this switch to power the server on manually, or return the server to standby mode. The automatic restart feature, which enables the server to restart following a momentary power loss, means that the server is never completely powered-off. Do not set the server to standby mode if any of the drive In-Use lights are on. This might damage the information stored on a hard disk or diskette. You can configure the server to start at a specified date and time, or when it receives a signal from either serial port. The result of pressing the power switch varies, depending on whether the server is in attended, unattended, or standby mode. To power-on the server from standby mode, press and release the power switch. To power-off the server when in unattended mode, press the power switch in slowly just until the power-on light goes out and then immediately release the switch. To power-off unattended mode but leave the server on, press and release the power switch. To turn unattended mode and return to standby mode, press the power switch just until the power LEDs go out. |
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HWS17","label":"Older System x->PC Server 325"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1GSMH-3EXG3K