CMM: CA has been generated status does not show up using CLI

Troubleshooting

Problem

The Command Line Interface (CLI) on the Chassis Management Module (CMM) does not show the certificate authority (CA) status when issuing the CLI command: sslcfg -T mm[x] where 'x' is the primary Management Module slot.

Resolving The Problem

Source

RETAIN tip: H206428

Symptom

The Command Line Interface (CLI) on the Chassis Management Module (CMM) does not show the certificate authority (CA) status when issuing the CLI command:

	sslcfg -T mm[x] where 'x' is the primary Management Module slot.

Affected configurations

The system is configured with one or more of the following IBM Options:

Flex System Chassis Management Module, Option part number 68Y7029, any replacement part number (CRU)

This tip is not system specific.

This tip is not software specific.

The 2PETO13 firmware for the CMM is affected.

Solution

This will be fixed in future CMM firmware targeted for fourth quarter 2012.

The file is or will be available by selecting the appropriate Product Group, type of System, Product name, Product machine type, and operating system on IBM Support's Fix Central web page, at the following URL:

http://www.ibm.com/support/fixcentral/

Workaround

Use the CMM web interface, which correctly shows the CA status.

Document Location

Worldwide

Operating System

PureFlex System and Flex System:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"HW94F","label":"Enterprise Chassis"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Tips

CMM: CA has been generated status does not show up using CLI - IBM Flex System