PQ80198: IMS V9 RUNUNDER SUPPORT FOR HP LOAD V1

Obtain the fix for this APAR.

APAR status

• Closed as unreproducible in next release.

Error description

• IMS V9 RUNUNDER SUPPORT FOR HP LOAD V1
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: All users of IBM IMS High Performance        *
  *                 Load for OS/390 Release 1 (FMID=H1IM110).    *
  ****************************************************************
  * PROBLEM DESCRIPTION: By the maintenance provided by this     *
  *                      APAR, IMS High Performance Load for     *
  *                      OS/390 Version 1 Release 1 is enabled   *
  *                      to run on IMS V9R1(5655-J38).           *
  ****************************************************************
  * RECOMMENDATION: Apply the maintenance for this APAR.         *
  ****************************************************************
  IMS High Performance Load for OS/390 and Physical Sequence
  Sort for Reload have added support for IMS Version 9.
  

Problem conclusion

Temporary fix

Comments

• The modules HPSR***9 and FABSPSL9 are added newly and other
  modules are modified for IMS V9 rununder support.
  *
  ========================
  = DOCUMENTATION CHANGE =
  ========================
  Documentation Changes:
  IMS High Performance Load User's Guide (SC27093802) should be
  changed as follows:
  ------------------------------------------------------------
  PREFACE.4     References to IMS Products and Releases
   :
   To make the text in this book easier to read, the version and
   release level of IMS has been abbreviated.
   The following abbreviation is used:
    :
   >> The following line should be deleted.
   DELETE:
    IMS Version 5 refers to IMS/ESA Version 5 Release 1
   /DELETE:
    IMS Version 6 refers to IMS/ESA Version 6 Release 1
    IMS Version 7 refers to IMS Version 7 Release 1
    IMS Version 8 refers to IMS Version 8 Release 1
   >> The following line should be added.
   ADD:
    IMS Version 9 refers to IMS Version 9 Release 1
   /ADD:
   :
  2.1.1.2 Initializing an Empty Database
   If you specify the DFSUINPT DD DUMMY statement, High
   Performance Load initializes an HDAM and HIDAM database.
  >> The following paragraph should be deleted.
  DELETE:
   It also performs as an performance replacement of the IMS HALDB
   partition data set initialization utility (DFSUPNT0).
  /DELETE:
   An HIDAM and each partition a PHIDAM database contains a root
   segment with a key of all X'FF'.
   :
  2.6.2 Reorganizing Partitions Individually
   :
  >> The following paragraph should be modified.
    You need to initialize the partition before the reload
    processing, and specify PARTINIT=NO in each IMS High
    Performance Load job. For the partition initialization
    processing, you can use IMS High Performance Load job by
  | specifying a dummy DFSUINPT DD in place of IMS DB
    pre-reorganization utility (DFSURPR0).
  :
  3.0 Physical Sequence Sort for Reload
  :
  3.1.1.2 Preventing Cascading
  :
  >> The following paragraph should be added.
  ADD:
   NOTE :
   If you reload database using IMS High Performance Load, we
   recommend using SERACH=-nnn parameter to prevent cascading
   instead of using PSSR. If you don't need to prevent cascading,
   specify 'NO' parameter in column 51-52 of your control
   statement (see "CTL Data Set (Used by FABSPSSR)" on page 85
   or "CTL Data Set (Used by FABSPSSI)"on page 90).
  /ADD:
  3.2 Operating Instructions
  3.2.3 JCL Requirements
  :
  >> The following paragraph should be modified.
    SORTIN DD
    This input data set is the sequential data set containing the
    unloaded database. It is created by the IMS HD Reorganization
    Unload utilities or an equivalent program. The acceptable
    format of unloaded database data set is the HD, the *SH
    format, or the communication industry standard format (*CS).
    The *CS or *SH format data set are created by IMS High
    Performance Unload for OS/390 unload utilities.
  | *CS format is not supported when the input DBD is defines as
     an HALDB.
  :
  3.3.2.3 Example of Steps for Preventing Cascading
  :
  >> The following paragraph should be modified.
  :
    4. Delete the old database cluster and define a new one.
    5. Reload the database with IMS HD Reorganization Reload
  |    utility or an equivalent program
    6. Create an image copy of the new database.
  :
  APPENDIX 1.3 Appendix C. Messages and Codes
  APPENDIX 1.3.3 Messages
  APPENDIX 1.3.3.1 High Performance Load Messages
  >>The following message is Modified.
    HPSR3651E SEGMENT WAS RELOADED BEYOND THE xGB SIZE LIMIT
    Explanation: High Performance Load utility reloaded a segment
    the 4- (or 8-) gigabyte size limit.
    System Action: Module HPSRHDLD or HPSRRLDM issues a user 3651
    abend.
    Programmer Response: If the block size is correct, the
    database data set is full. If you are reloading an HDAM/PHDAM
    database, adjust the SEARCH control statement to decrease the
    number of segments directed to overflow portion of the
    database. If so, rerun the job. If this situation persists,
    plan to divide the database data set into two or more data set
    groups. Correct the error and rerun the job.
    Problem Determination: Check if the block size of the output
  | database data set is even and database is a non-HALDB, when
    you are reloading an unloaded data set made from an OSAM
    database whose size was over 4 GB.
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UQ83020

Modules/Macros

•    FABFLINK FABSDATE FABSHPSR FABSPDTS FABSPE15
  FABSPSL9 HPSRBFRM HPSRBITM HPSRCILE HPSRCIL7 HPSRCIL8 HPSRCIL9
  HPSRCMPR HPSRCMP6 HPSRCMP7 HPSRCMP8 HPSRCMP9 HPSRFIG1 HPSRGVT0
  HPSRHALM HPSRHAL7 HPSRHAL8 HPSRHAL9 HPSRHDBD HPSRHDB7 HPSRHDB8
  HPSRHDB9 HPSRHDIN HPSRHDI7 HPSRHDI8 HPSRHDI9 HPSRHDLD HPSRHDL6
  HPSRHDL7 HPSRHDL8 HPSRHDL9 HPSRHRPT HPSRHRP7 HPSRHRP8 HPSRHRP9
  HPSRHSLD HPSRHSL6 HPSRHSL7 HPSRHSL8 HPSRHSL9 HPSRHTBL HPSRLGSC
  HPSRLGS6 HPSRLGS7 HPSRLGS8 HPSRLGS9 HPSRMSGS HPSRMSGT HPSROAFL
  HPSROSAM HPSRPC00 HPSRPDBD HPSRPDB6 HPSRPDB7 HPSRPDB8 HPSRPDB9
  HPSRPTRS HPSRPTR6 HPSRPTR7 HPSRPTR8 HPSRPTR9 HPSRPUT0 HPSRRCBM
  HPSRRLDM HPSRRLD7 HPSRRLD8 HPSRRLD9 HPSRRPRT HPSRRPR6 HPSRRPR7
  HPSRRPR8 HPSRRPR9 HPSRRPTH HPSRRRI0 HPSRRRI9 HPSRSMGR HPSRSQER
  HPSRSQE6 HPSRSQE7 HPSRSQE8 HPSRSQE9 HPSRSTMC HPSRUPDF HPSRUPD6
  HPSRUPD7 HPSRUPD8 HPSRUPD9 HPSRVSAM H1IM110J
  

Fix information

• Fixed component name

  IMS HIGH PERF L

• Fixed component ID

  5655E0700

Applicable component levels

• R110 PSY UQ83020

     UP03/12/17 P F312

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.