PQ61148: MSGHPSR0003W LAST RECORD WAS NOT A TRAILER RECORD RECEIVED. THIS APAR IS TO CORRECT PSSR PORTION OF HP LOAD.

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• MSGHPSR0003W LAST RECORD WAS NOT A TRAILER RECORD received.
  File was determined to be *HD format because of information in
  the header record.  However, the format was actually *CS and
  the spec for *CS needs to be revised.  This APAR is to fix the
  PSSR portion of HP Load.
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: All users of IBM IMS High Performance        *
  *                 Load for OS/390 Release 1 (FMID=H1IM110).    *
  *                 who use Physical Sequence Sort for Reload    *
  *                 (PSSR).                                      *
  ****************************************************************
  * PROBLEM DESCRIPTION: (1) PSSR issues MSGFABS3640E, or        *
  *                          MSGFABS3651E, when the CS format    *
  *                          file contains only the DBD name,    *
  *                          segment name and header length in   *
  *                          the header.                         *
  *                      (2) The following problems appear after *
  *                          APAR PQ57582 has been applied.      *
  *                           - PSSR incorrectly converts the    *
  *                             *CS header record, when one of   *
  *                             the following conditions is      *
  *                             satisfied ;                      *
  *                             - converting the DB organization *
  *                               from PHDAM to PHIDAM.          *
  *                             - changing the PHIDAM root key   *
  *                               length.                        *
  *                           - PSSR incorrectly puts segments   *
  *                             into SORTOUT4 data set,when      *
  *                             receives rc=4,rsn=4059 from the  *
  *                             partition selection.             *
  *                           - PSSR reports incorrect RAP and   *
  *                             BLOCK number, when a randomizer  *
  *                             assigns RAP=0, BLOCK=0 to a      *
  *                             record of HALDB.                 *
  ****************************************************************
  * RECOMMENDATION: Apply the maintenance for this APAR.         *
  ****************************************************************
  (1) PSSR uses header length and key length fields in header
      record to determine the unload format is *CS format, but
      the key length field in the header is optional for *CS
      format.
  (2) PSSR override a work area during creating the parameter
      list for partition selection.
  

Problem conclusion

• FABSRT15, FABSRT35, FABSPE15, FABSPE35 and FABSCOM0 have been
  modified to refer the *CS format only by DBD name, segment name
  and header length fields, and not to override the work area.
  *
  ========================
  = DOCUMENTATION CHANGE =
  ========================
  Documentation Changes:
  IMS High Performance Load User's Guide (SC27093800) should be
  changed as follows:
  ------------------------------------------------------------
  Part 3. Physical Sequence Sort for Reload.
  Chapter 7. introduction
  Restrictions
  ADD:
  |In case that unload file format is *CS, PSSR does not support
  |DBD whose segment name is different from DBD used by unload
  ADD:
  Appendix C. Messages and Codes
  C.3. Messages
  C.3.2 High Performance Load Messages
   The following messages should be added.
  ADD:
  |FABS3642E A SEGMENT NAME : nnnnnnnn IN UNLOAD DATA SET IS NOT
  |FOUND IN DBD
  |Explanation: PSSR is unable to find a segment name nnnnnnnn
  |in the DBD that matches one from the Unload data set.
  |System Action: PSSR issues a user 3642 abend and dump.
  |Programmer Response: Correct the error, and rerun the job.
  |Problem Determination: Check to be certain you are running with
  |the correct DBD.
  ADD:
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UQ67089

Modules/Macros

•    FABSCOMD FABSCOM0 FABSPE15 FABSPE35 FABSRT15
  FABSRT35
  

Fix information

• Fixed component name

  IMS HIGH PERF L

• Fixed component ID

  5655E0700

Applicable component levels

• R110 PSY UQ67089

     UP02/06/13 P F206

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.