PM66261: SOME VTAM ISSUES AND LMOD=KO2CDB2x#L,CSECT=#UNKNOWN,CODE=S0C4/00 000011 ABEND0C4 ABEND0C4-11

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• 1)Zooming(PF11) of Jobname does not work on stored procedures
  and user-defined functions for WLMA and RRSA commands.
  2) Zoom on IMS region in panel ZISSM displays the message:
   "No thread information for IMS control region."
   ________________ ZISSM    VTM     O2       V410./C D911
  01/15/10 18:31:03   2
  > Help PF1         Back PF3         Up PF7         Down PF8
  Zoom PF11
  ================================================================
  ===============
  >                      IMS CONNECTION DETAIL INFORMATION
  
   ISSM
  +
  +   Region   Type   Crc   Lit    Rtt       Module    Err  Psb
  Status
  +  --------  ----   ---   ----   --------  --------  ---
  --------  -----------
  +  IMSA11CR  CNTL    -    SYS1     None    DSNMIN10   R     N/A
  NOT-IN-DB2    <<== zoom
  ================================================================
  ===============
   ________________ ZNOCNTL  VTM     O2       V410./C D911
  01/15/10 18:31:39   2
  > Back PF3
  ================================================================
  ===============
  
  >     No thread information for IMS control region.
  
  ================================================================
  ===============
  3)On panel ZBACKT command BATA displays jobs which originate
  StoredProcedues and UDF threads.
  Command THDB on the same panel shows these threads as Background
  threads because of matching JOBNAME field.
  Such threads should be shown only on corresponding panels ZSTPT
  (Stored Procedures Thread Summary) and ZRRSAT(Functions Thread
  Summary).
  
  4)On panel ZBACKT thread's counter does not include 'Child'
  threads for command BATA. Zooming(PF11) of Jobname does not
  display 'Child' threads too.
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: OMEGAMON XE for DB2 PE/DB2PM                 *
  *                 users of component:                          *
  *                 -   Classic Interface                        *
  *                 -   CUA Interface                            *
  ****************************************************************
  * PROBLEM DESCRIPTION: 1. General enhancements for child       *
  *                      threads.                                *
  *                      2. Corrections for VTAM help panels     *
  *                      and incorrouts.                         *
  *                      3.LMOD=KO2CDB2A#L,CSECT=#UNKNOWN,       *
  *                      OFFSET=050CB2,CODE=S0C4/00000011        *
  *                                                              *
  ****************************************************************
  * RECOMMENDATION: Apply this PTF                               *
  *                                                              *
  ****************************************************************
  PROBLEM SUMMARY:
  1. General enhancements for child threads:
  1.1. The logic was cleared/corrected for child threads
  concerning their type, displaying corrid or jobname and so on.
  
  2. Correction several problems:
  2.1. ATF screen ZATRQ in Classic displayed fields incorrectly
  in VTS format (logon via ISPF).
  2.2. Help panels did not describe all possible threads' types.
  2.3. RRSA command did not work if the remote DB2 subsystem was
  on infoline.
  3. DB2 thread ending can cause a S0C4 abend.
  
  PROBLEM CONCLUSION:
  1. General enhancements for child threads:
  1.1. The logic was cleared/corrected for child threads
  concerning their type, displaying corrid or jobname and so on.
  
  2. Correction several problems:
  2.1. ATF screen ZATRQ in Classic was changed to display fields
  correctly in VTS format (logon via ISPF).
  2.2. Help panels were updated to describe all possible threads'
  types.
  2.3. RRSA command was corrected to work if the remote DB2
  subsystem was on infoline.
  3. Ensure recovery if DB2 thread ends.
  

Problem conclusion

• 1. General enhancements for child threads:
  1.1. The logic was cleared/corrected for child threads
  concerning their type, displaying corrid or jobname and so on.
  
  2. Correction several problems:
  2.1. ATF screen ZATRQ in Classic was changed to display fields
  correctly in VTS format (logon via ISPF).
  2.2. Help panels were updated to describe all possible threads'
  types.
  2.3. RRSA command was corrected to work if the remote DB2
  subsystem was on infoline.
  3. Ensure recovery if DB2 thread ends.
  
  
  KEYWORDS : CUA ATF DB2 VTS ZATRQ CLASSIC
  

Temporary fix

Comments

• ž**** PE13/06/14 PTF IN ERROR. SEE APAR PM91050  FOR DESCRIPTION
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

  PM06128

• APAR is sysrouted TO one or more of the following:

  UK83022

Modules/Macros

• KD2@CNTY KD2DATB3 KD2DATF0 KD2OACOD KD2OATCD
  KD2OATC2 KD2OBACD KD2OBAC2 KD2OCITD KD2OCIT2 KD2OIMTD KD2OIMT2
  KD2OISSD KD2OTRGD KD2OTRG2 KD2OUDAD KD2PSA2P KD2PSA3P KD2THRAT
  KD2VBPDD KD2VDTDD KD2VLKWD KD2VSTOP KD2VTIIO KD20LKWD KO2ACKTH
  KO2ACKUH KO2ATRCB KO2CCNSA KO2CCNSK KO2CCNS2 KO2CTHIA KO2CTHIK
  KO2CTHI2 KO2CTHMA KO2CTHMK KO2CTHM2 KO2CTHNA KO2CTHNK KO2CTHN2
  KO2CTHOA KO2CTHOK KO2CTHO2 KO2CTHSA KO2CTHSK KO2CTHS2 KO2CTH2A
  KO2CTH2K KO2CTH22 KO2CT2SA KO2CT2SK KO2CT2S2 KO2ENCLH KO2ENCUH
  KO2ICSTH KO2ICSUH KO2IMSTH KO2IMSUH KO2LLUQH KO2OCKOH KO2OCMCB
  KO2OCONB KO2OTHDB KO2OTHFB KO2OTHJB KO2OTHKB KO2OTHSB KO2OTHVB
  KO2PACTH KO2RIGTH KO2RIGUH KO2SUMMH KO2TACTH KO2TDTLH KO2UTIDH
  KO2ZLLQT KO2ZLLUH KO2ZLOCH
  

Fix information

• Fixed component name

  OM XE DB2PE/PM

• Fixed component ID

  5655OPE00

Applicable component levels

• R511 PSY UK83022

     UP12/10/30 P F210

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.