IBM Support

PM52466: CONTROL ISSUANCE OF MESSAGE FPEV2102W

A fix is available

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as unreproducible in next release.

Error description

  • New configuration parameter to control whether message FPEV2102W
    is issued or not. The message shall be displayed if the total
    elapsed processing time for a data retrieval request exceeds the
    specified value. Otherwise the message shall be suppressed.
    

Local fix

  • n/a
    

Problem summary

  • ****************************************************************
    * USERS AFFECTED: OMEGAMON XE for DB2 PE/DB2PM                 *
    *                 users of component:                          *
    *                 -   PE Server subtask                        *
    ****************************************************************
    * PROBLEM DESCRIPTION: Message FPEV2102W is issued too often.  *
    *                                                              *
    ****************************************************************
    * RECOMMENDATION: Apply this PTF                               *
    *                                                              *
    ****************************************************************
    PROBLEM SUMMARY:
    In environments where systems are running at their capacity
    limit, a monitoring PE Server subtask might not receive response
    to a call to DB2 IFI within the internal maximum wait time and
    issue message FPEV2102W. The issuance of message FPEV2102W
    cannot be suppressed.
    
    PROBLEM CONCLUSION:
    A new modify command is introduced to set the value for the new
    parameter timeout notify threshold (TONT). Message FPEV2102W is
    suppressed until the elapsed processing time for a data
    retrieval request exceeds the time calculated as the internal
    maximum wait time plus the value set for the timeout notify
    threshold.
    

Problem conclusion

Temporary fix

Comments

  • A new modify command is introduced to set the value for the new
    parameter timeout notify threshold (TONT). Message FPEV2102W is
    suppressed until the elapsed processing time for a data
    retrieval request exceeds the time calculated as the internal
    maximum wait time plus the value set for the timeout notify
    threshold.
    
    KEYWORDS : FPEV2102W
    

APAR Information

  • APAR number

    PM52466

  • Reported component name

    OM XE DB2PE/PM

  • Reported component ID

    5655OPE00

  • Reported release

    510

  • Status

    CLOSED UR1

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    NoSpecatt

  • Submitted date

    2011-11-17

  • Closed date

    2011-12-14

  • Last modified date

    2012-01-01

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

    UK74796

Modules/Macros

  • DGO@BTCH DGO@CONV DGO@DB   DGO@DTA1 DGO@LOAD
    DGO@MIG1 DGO@MIG2 DGO@MT1  DGO@MT2  DGO@MT3  DGO@MT4  DGO@MT5
    DGO@PC1  DGO@PC2  DGO@PC3  DGO@PC4  DGO@SCRD DGO@SDOB DGO@SQPA
    DGO@TBL  DGO@WSTE DGOVBMG  DGOVCCP  DGOVCINI DGOVCRDB DGOVDB2I
    DGOVDB2M DGOVDMSG DGOVDS   DGOVDSIN DGOVDSRC DGOVDSS  DGOVEEDI
    DGOVEEDR DGOVEEDS DGOVEE00 DGOVEE01 DGOVGIFC DGOVHMCD DGOVHMDR
    DGOVHMM0 DGOVHMM1 DGOVHMM2 DGOVHMSD DGOVHMS1 DGOVHMTC DGOVHM00
    DGOVISI  DGOVISIT DGOVMB   DGOVMDI  DGOVMDSP DGOVMIDI DGOVMMXM
    DGOVMRAP DGOVMSTR DGOVMUAE DGOVM001 DGOVM002 DGOVPCON DGOVPMOV
    DGOVPOPT DGOVPP0  DGOVPP1  DGOVPP2  DGOVPP3  DGOVPP4  DGOVPP5
    DGOVPUPD DGOVRGM1 DGOVRG01 DGOVRG02 DGOVRG03 DGOVRG04 DGOVRG10
    DGOVRG11 DGOVRG12 DGOVRG13 DGOVRG20 DGOVRG21 DGOVRG22 DGOVRG23
    DGOVRG24 DGOVRG25 DGOVRG26 DGOVRG27 DGOVRG28 DGOVRG4B DGOVRG4C
    DGOVRG4X DGOVRSFI DGOVRTG0 DGOVRTG1 DGOVSADK DGOVSCNI DGOVSCPI
    DGOVSCS2 DGOVSCS3 DGOVSDOB DGOVSDSC DGOVSERI DGOVSGFT DGOVSGSA
    DGOVSQRY DGOVSQSM DGOVSQTR DGOVSSEN DGOVSUBS DGOVTAC  DGOVTBI
    DGOVTCL  DGOVTCPD DGOVTCPL DGOVTCPS DGOVTCPT DGOVTGC  DGOVTGS
    DGOVTIA  DGOVTLI  DGOVTSCL DGOVTSD  DGOVTSEX DGOVTSIA DGOVTSO
    DGOVTSOI DGOVTSSD DGOVTSSO DGOVTSTA DGOVTSTS DGOVTSX  DGOVTTA
    DGOVTWR  DGOVUAS0 DGOVUM00 DGOVUM01 DGOVUM02 DGOVUSS0 DGOVWDOG
    DGOVXMSG DGOVZTCC DGOVZTRC DGOZBIND DGOZBTCH DGOZBTC2 DGOZCONV
    DGOZCOPY DGOZDB   DGOZDMDB DGOZDTA1 DGOZFL1  DGOZLOAD DGOZMIG1
    DGOZMIG2 DGOZMT1  DGOZMT2  DGOZMT3  DGOZMT4  DGOZMT5  DGOZPC1
    DGOZPC2  DGOZPC3  DGOZPC4  DGOZSCRD DGOZSQPA DGOZSUB1 DGOZSUB2
    DGOZTBL  DGOZWSTE FPE@DB2S FPE@WRPA FPE@WRP2 FPE@WR2C FPEUFFER
    FPEUFFE2 FPEUFIOI FPEUFIO2 FPEUFOCR FPEUFOC2 FPEUFUIS FPEUFUIT
    FPEUFUNI FPEUFUN2 FPEUFWMG FPEUFWMX FPEUFYDY FPEUFYD2 FPEUFYLD
    FPEUFYST FPEUFYS2 FPEUIFCI FPEUIFC2 FPEUMSGS FPEVDB2I FPEVDB2S
    FPEVDB22 FPEVDB26 FPEVMST1 FPEVMST2 FPEVM000 FPEVRDS1 FPEVSERV
    FPEVTMEM FPEVWRPA FPEVWRP2 FPEVWR2C FPEVZMAI FPEVZRAC FPEZPMS
    

Publications Referenced
GH12692800GH12692300   

Fix information

  • Fixed component name

    OM XE DB2PE/PM

  • Fixed component ID

    5655OPE00

Applicable component levels

  • R510 PSY UK74796

       UP11/12/16 P F112

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.

[{"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SSAV2B","label":"IBM Db2 Buffer Pool Analyzer for z\/OS"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"5.1.0","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}},{"Business Unit":{"code":"BU048","label":"IBM Software"},"Product":{"code":"SSCT4H5","label":"IBM Tivoli OMEGAMON XE for Db2 PE \/ PM \/ BPA"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"5.1.0","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]

Document Information

Modified date:
01 January 2012