PM29852: KO2ZXRM+FD0 ABEND0C4-11 DURING SUBSYSTEM INITIALIZATION, U2008 RSN X'2152' at offset X'32A' in OMPEZSL CP31XTNC and CP31XTNT=0

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• Dump Title:
  OMPE SERVER ERROR CID=DB2OM STC=CANSO2   SSM=OMPEXRM /XCFPOST
    ABEND=.S0C4 RSN=00000011 MODE=ABEND
  ABEND0C4-11 KO2ZXRM+FD0 (at BASE510 level) on a D5039000A21C
  instruction (CLC) with R9 bad.  Just prior to this ABEND a
  Storage Obtain was done for a workarea for KO2ZXRM, from this
  area a pointer was put into R9.  However, this area no longer
  appears to be good.
  This occurred just 3 seconds after Omegamon was started, the
  messages appeared:
  IEF403I CANSO2 - STARTED - TIME=07.46.44
  KO2Z035I  OMPE V510 Server virtual storage limit
            MEMLIMIT(NOLIMIT) setting discovered
  KO2Z999E  OMPE V510 Service error SSM=OMPEXRM /XCFPOST
            ABEND=.S0C4 RSN=00000011 MODE=ABEND
  KO2Z001I  OMPE V510 Subsystem initialization in progress
  KO2Z221I  OMPE V510 Subsystem load modules page protection is
            active
  KO2Z200I  OMPE V510 Load modules loaded from LIB=STEPLIB-
            concatenation
  KO2Z008I  OMPE V510 Subsystem successfully initialized in
            active mode
  IEA794I SVC DUMP HAS CAPTURED:
  DUMPID=012 REQUESTED BY JOB (CANSO2  )
  DUMP TITLE=OMPE SERVER ERROR CID=DB2OM STC=CANSO2 SSM=OMPEXRM
              /XCFPOST  ABEND=.S0C4 RSN=00000011 MODE=ABEND
  KO2Z027I  OMPE V510 Subsystem initialization performed by START
            service request
  
  KO2O1963E - OMEGAMON subtask PESERVER not active
  FPEV3015W  NO PATH TO THE PE SERVER INSTANCE FOUND BECAUSE NO
  ROUTING INFORMATION IS AVAILABLE.
  
  ================================================================
  Also:
  2011/03/17 10:05:14 KO2S0500E OSNP SDUMPx Failure. RC: 00000208
  
  2011/03/17 10:05:14 KO2S0508E OSNP LMOD: KO2HWLMB, CSECT:
  #UNKNOWN,
  OFFSET: 005944
  2011/03/17 10:05:15 CI0970: OMEGAMON SUBTASK ABEND CODE=040C4000
  PSW=078D2000B1263A44  TCB=009BA4B8
  2011/03/17 10:05:15 CI0971: PROGRAM NAME=KO2DMGRB
  2011/03/17 10:05:15 IEA794I SVC DUMP HAS CAPTURED:
  2011/03/17 10:05:15 DUMPID=001 REQUESTED BY JOB (CANSO2  )
  2011/03/17 10:05:15 DUMP TITLE=OMPE SERVER ERROR CID=DB2OM
  STC=CANSO2
  Symptom             Description
  
  -------             -----------
  RIDS/KO2ZXPCB#L     Load module name: KO2ZXPCB
  RIDS/#UNKNOWN       Csect name: #UNKNOWN
  AB/U2008            User Abend code: 2008
  PRCS/00002152       Abend reason code: 00002152
  REGS/0E128          Register/PSW difference for R0E: 128
  REGS/0A32C          Register/PSW difference for R0A: 32C
  RIDS/OMPEZRR#R      Recovery routine csect name: OMPEZRR
  RSN2152  EQU   X'2152'       OMPEZSL max cell pool extents
  exceeded
  The U2008 RSN X'2152' is issued at offset X'32A' in OMPEZSL
  (OMPE V510
  N/A 0 2/20/11 16.36 HKDB510), OMPEZSL is the OMPE Collector
  Subsystem
  Cell Pool Manager.
  Looking at KO2ZZSL, the following comparison fails:
  
  CLC   CP31XTNC,CP31XTNT
  BL    ZGT0500
  XC    PCPLPAR,PCPLPAR
  MVC   PCPLRC,=AL4(RC16)
  MVC   PCPLRSN,=AL4(RSN2152)
  R8 is X'31077FB0', CP31XTNC and CP31XTNT are both zeroes, so the
  BL
  fails and we get the U2008 RSN X'2152'.
  

Local fix

• N/A
  

Problem summary

• ****************************************************************
  * USERS AFFECTED: OMEGAMON XE for DB2 PE/DB2PM                 *
  *                 users of component:                          *
  *                 -   Classic Interface                        *
  ****************************************************************
  * PROBLEM DESCRIPTION: OMPE SERVER ERROR CID=DB2OM             *
  *                      SSM=KO2ZXPCB/ZSHIFT ABEND=U2008         *
  *                      RSN=00002152 and RSN=00002176           *
  *                                                              *
  ****************************************************************
  * RECOMMENDATION: Apply this PTF                               *
  *                                                              *
  ****************************************************************
  PROBLEM SUMMARY:
  Invalid cell pool secondary extents exceeded validity checks.
  
  PROBLEM CONCLUSION:
  Remove cell pool secondary extents exceeded validity checks.
  

Problem conclusion

• Remove cell pool secondary extents exceeded validity checks.
  
  KEYWORDS : CID=DB2OM  SSM=KO2ZXPCB/ZSHIFT ABEND=U2008
             RSN=00002152 RSN=00002176
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UK66350

Modules/Macros

• KO2ZZSL
  

Fix information

• Fixed component name

  OM XE DB2PE/PM

• Fixed component ID

  5655OPE00

Applicable component levels

• R510 PSY UK66350

     UP11/04/03 P F103

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.