A fix is available
APAR status
Closed as program error.
Error description
This APAR fixes several problems found during internal testing.
Local fix
Problem summary
**************************************************************** * USERS AFFECTED: All IMS High Performance Image Copy for z/OS * * Version 4 Release 1 users ( FMID=H1J0410 ) * **************************************************************** * PROBLEM DESCRIPTION: This APAR includes fixes for following * * problems: * * * * - HPIC Image Copy function terminates * * with an unexpected error when all * * of the following conditions are * * satisfied: * * - FASTIC=(,COPY) and OFFLDTYPE=S are * * specified. * * - Creating secondary image copy is * * requested. * * - LRECL size of the input database is * * smaller than 64 byte. * * * * - HPIC Recovery function terminates * * with ABEND U0001 ( ABENDU0001 ) when * * HPIO=Y is specified for OSAM * * database. * * * * - HPIC Recovery function terminates * * with ABEND S300 ( ABEND300 ) when * * HPIO=Y is specified for OSAM database * * in dirty getmain environment. * * * * - HPIC terminates with ABEND S23E-8 * * ( ABEND23E RSN8 ) when DBRC=Y is * * specified in IMS version 10 * * environment. * * * * - HPIC Diagnostics Aid ( FABJDIAG ) * * does not show APAR numbers correctly * * for DFSUDMP0, DBFUMDP0 and DFSURDB0. * * * * - HPIC Recovery function ignores * * TIMECHK=N parameter in IMS version 10 * * environment. * * * * - HPIC Create Image Copy function * * terminates with RC=08 and message * * FABJ0140E ( MSGFABJ0140E ) when all * * of the following conditions are * * satisfied: * * - HPIC is running in IMS version 10. * * - The value of MINVERS in RECON data * * set is '9.1' or lower. * * - The input image copy data set is * * created by IMS Database Recovery * * Facility (DRF) or IMS Parallel * * Reorganization (IPR). * * * * - HPIC Image Copy function reports the * * compression routine name to ICERPRT * * DD although compression processing is * * canceled and issues message * * FABJ9100W ( MSGFABJ9100W ). * * * * - HPIC Create Image Copy function * * terminates with ABEND S0C4 * * ( ABEND0C4 ) in the CHANGE.IC command * * build process when the input or * * output image copy data set resides on * * 5 or more volumes. * * * * - HPIC Image Copy function fails in * * registering CHANGE.IC result to IMS * * Tools Knowledge Base (ITKB) Output * * Repository when all of the following * * conditions are satisfied: * * - FASTIC=(,COPY) is specified. * * - OFFLDTYPE=S or F is specified. * * - DBRC=Y is specified. * * - ITKB is active. * * - Creating secondary image copy is * * requested. * * * * - HPIC Image Copy function registers * * invalid IC record in the RECON data * * set when all of the following * * conditions are satisfied: * * - Failing in creating both primary * * and secondary image copy data set. * * - The target database type is DEDB. * * - FASTIC=(,DUMP) is specified. * * * * - HPIC Recovery function terminates * * with RC=08 and message DFS312A * * ( MSGDFS312A ) when one of the * * following conditions is satisfied: * * - DBRC=Y is specified and failing in * * the DBRC authorization process. * * - DBRC=N is specified. * * * * - HPIC terminates with ABEND S001-5 * * ( ABEND001 RSN5 ) when the specified * * input in ICEIN DD ends with comma. * * * * - The message id of FABJ3905E * * ( MSGFABJ3905E ) and user abend code * * U3905 ( ABENDU3905 ) that indicate * * the error of DEVTYPE macro is * * incorrect. The message id and user * * abend code are changed to * * FABJ3811E/U3811 correctly. * * * * - HPIC Image Copy/Create Image Copy * * function terminates with ABEND U3916 * * ( ABENDU3916 ) and message FABJ3916E * * RSN=0450 ( MSGFABJ3916E RSN0450 ) * * when the target DEDB has over 1616 * * areas. * **************************************************************** * RECOMMENDATION: Apply the maintenance for this APAR. * **************************************************************** This APAR includes fixes for following problems: - HPIC Image Copy function terminates with an unexpected error when all of the following conditions are satisfied: - FASTIC=(,COPY) and OFFLDTYPE=S are specified. - Creating secondary image copy is requested. - LRECL size of the input database is smaller than 64 byte. - HPIC Recovery function terminates with ABEND U0001 ( ABENDU0001 ) when HPIO=Y is specified for OSAM database. - HPIC Recovery function terminates with ABEND S300 ( ABEND300 ) when HPIO=Y is specified for OSAM database in dirty getmain environment. - HPIC terminates with ABEND S23E-8 ( ABEND23E RSN8 ) when DBRC=Y is specified in IMS version 10 environment. - HPIC Diagnostics Aid ( FABJDIAG ) does not show APAR numbers correctly for DFSUDMP0, DBFUMDP0 and DFSURDB0. - HPIC Recovery function ignores TIMECHK=N parameter in IMS version 10 environment. - HPIC Create Image Copy function terminates with RC=08 and message FABJ0140E ( MSGFABJ0140E ) when all of the following conditions are satisfied: - HPIC is running in IMS version 10. - The value of MINVERS in RECON data set is '9.1' or lower. - The input image copy data set is created by IMS Database Recovery Facility (DRF) or IMS Parallel Reorganization (IPR). - HPIC Image Copy function reports the compression routine name to ICERPRT DD although compression processing is canceled and issues message FABJ9100W ( MSGFABJ9100W ). - HPIC Create Image Copy function terminates with ABEND S0C4 ( ABEND0C4 ) in the CHANGE.IC command build process when the input or output image copy data set resides on 5 or more volumes. - HPIC Image Copy function fails in registering CHANGE.IC result to IMS Tools Knowledge Base (ITKB) Output Repository when all of the following conditions are satisfied: - FASTIC=(,COPY) is specified. - OFFLDTYPE=S or F is specified. - DBRC=Y is specified. - ITKB is active. - Creating secondary image copy is requested. - HPIC Image Copy function registers invalid IC record in the RECON data set when all of the following conditions are satisfied: - Failing in creating both primary and secondary image copy data set. - The target database type is DEDB. - FASTIC=(,DUMP) is specified. - HPIC Recovery function terminates with RC=08 and message DFS312A ( MSGDFS312A ) when one of the following conditions is satisfied: - DBRC=Y is specified and failing in the DBRC authorization process. - DBRC=N is specified. - HPIC terminates with ABEND S001-5 ( ABEND001 RSN5 ) when the specified input in ICEIN DD ends with comma. - The message id of FABJ3905E ( MSGFABJ3905E ) and user abend code U3905 ( ABENDU3905 ) that indicate the error of DEVTYPE macro is incorrect. The message id and user abend code are changed to FABJ3811E/U3811 correctly. - HPIC Image Copy/Create Image Copy function terminates with ABEND U3916 ( ABENDU3916 ) and message FABJ3916E RSN=0450 ( MSGFABJ3916E RSN0450 ) when the target DEDB has over 1616 areas.
Problem conclusion
FABJCRC1 has been modified as follows: - To use the time stamp of 14-digit format ( yyyydddhhmmsst ) when all of the following conditions are satisfied: - IMS version that is stored in the header record of input image copy data set is V10R1 or higher. - Value of MINVERS in RECON data set is '10.1' or lower. - To release the storage that is used for the input image copy data set. FABJDBCM has been modified to check the end of volume list correctly in the CHANGE.IC command build process. FABJDEMP, FABJDPSN, FABJDPUT, FABJDRQS and FABJMAS1 have been modified not to report the compression routine name to ICERPRT DD when the compression processing is canceled. FABJFCDN has been modified as follows: - To obtain the storage using the correct length for the secondary image copy data set in offload processing. - Not to report the compression routine name to ICERPRT DD when the compression processing is canceled. - Not to register the image copy record to the DBRC when all of the following conditions are satisfied: - Input database is DEDB. - FASTIC=(,DUMP) is specified. - Failing in creating both primary and secondary image copy data set. FABJOINT has been modified as follows: - To wait the completion of I/O before the CLOSE macro for the DBDS that is extended on the same volume when HPIC needs to write beyond the end of the current extent. - To clear the HPIC control block. FABJRDB7, FABJRDB8 and FABJRDB9 have been modified to check the organization of input image copy data set and determine type of image copy when one of the following conditions is satisfied: - Failing in the DBRC authorization process. - DBRC=N is specified. FABJRDBA has been modified as follows: - To check the organization of input image copy data set and determine the type of image copy when one of the following conditions is satisfied: - Failing in the DBRC authorization process. - DBRC=N is specified. - To check the correct position of the TIMECHK parameter in the SYSIN control card. FABJRFCN has been modified to change the message id from FABJ3905E to FABJ3811E and the user abend code from U3905 to U3811. FABJSTMS has been modified to notify the end of ICEIN DD to modules FABJPARM and FABJPRM2. FABJUIC1 has been modified to register the result of CHANGE.IC command that is issued in offload process to IMS Tools Knowledge Base Output Repository. FABUARCN has been modified not to issue the unnecessary DETACH macro to the subtask. FABUMOD0 has been modified to show the APAR numbers correctly for the CSECT name of DFSUDMP0, DBFUMDP0 and DFSURDB0. FABJBLKD has been modified to add the flag that is managed for allocation of DEDB. FABJMAIN has been modified to bypass the process that checks whether the input database is allocated by JCL DD using AREA name for the DEDB. FABJDALO has been modified to allocate and unallocate the database of DEDB using the correct DD name. DD name is used as follows: - The ADSDD name is used when DBRC is active. - The AREA name is used when DBRC is not active. FABJFCCN has been modified to call the module FABJDALO that unallocates the primary image copy data set in the FASTIC=(,COPY) process. FABJRCHK has been modified to change the DSECT of HPIC control block. FABJMDPN has been modified to issue the DELETE macro for IMS modules DFSUCP40 and DFSUCP80. FABJPARM, FABJPRM2 have been modified to check the return code from the module FABJSTMS in the last record process of ICEIN DD. FABJBRLS has been modified to pass the parameter list to BRLSC macro correctly. The following modules have been reassembled. FABJACQG FABJAPIM FABJARC0 FABJASPM FABJATRC FABJBRL7 FABJBRL8 FABJBRL9 FABJBRLA FABJCMDB FABJCRC0 FABJCRC3 FABJCTCV FABJCZCV FABJDALC FABJDALS FABJDBAL FABJDBC1 FABJDBDN FABJDBD7 FABJDBD8 FABJDBD9 FABJDBDA FABJDBF0 FABJDBLK FABJDBRC FABJDBR7 FABJDBR8 FABJDBR9 FABJDBRA FABJDCTL FABJDDIM FABJDFCN FABJDFC7 FABJDFC8 FABJDFC9 FABJDFCA FABJDMP0 FABJDMPN FABJDMP7 FABJDMP8 FABJDMP9 FABJDMPA FABJDOPN FABJDPS7 FABJDPS8 FABJDPS9 FABJDPSA FABJDREQ FABJDRSN FABJFCAI FABJFCCM FABJFCC7 FABJFCC8 FABJFCC9 FABJFCCA FABJFCD7 FABJFCD8 FABJFCD9 FABJFCDA FABJGDGB FABJGLRP FABJICDD FABJIDXN FABJIDX7 FABJIDX8 FABJIDX9 FABJIDXA FABJINT1 FABJINT2 FABJINT3 FABJIPRC FABJMDP7 FABJMDP8 FABJMDP9 FABJMDPA FABJMOD0 FABJMRGE FABJMSUL FABJNTFC FABJNTFI FABJNTFS FABJOFDD FABJOFL0 FABJOFL1 FABJORCN FABJORC7 FABJORC8 FABJORC9 FABJORCA FABJPRM3 FABJRCH7 FABJRCH8 FABJRCH9 FABJRCHA FABJRETC FABJRETM FABJRFC7 FABJRFC8 FABJRFC9 FABJRFCA FABJRPT0 FABJRPT1 FABJSAS1 FABJSAS2 FABJSTA FABJTERM FABJTGEN FABJTOI FABJXCR FABJXHPC FABJXLIM
Temporary fix
Comments
×**** PE09/04/07 FIX IN ERROR. SEE APAR PK84204 FOR DESCRIPTION
APAR Information
APAR number
PK76238
Reported component name
IMS HP IMAGE CO
Reported component ID
5655K9600
Reported release
410
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2008-11-21
Closed date
2008-12-01
Last modified date
2009-04-14
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UK42033
Modules/Macros
FABJACQG FABJAPIM FABJARC0 FABJASPM FABJATRC FABJBLKD FABJBRLA FABJBRLS FABJBRL7 FABJBRL8 FABJBRL9 FABJCMDB FABJCRC0 FABJCRC1 FABJCRC3 FABJCTCV FABJCZCV FABJDALC FABJDALO FABJDALS FABJDBAL FABJDBCM FABJDBC1 FABJDBDA FABJDBDN FABJDBD7 FABJDBD8 FABJDBD9 FABJDBF0 FABJDBLK FABJDBRA FABJDBRC FABJDBR7 FABJDBR8 FABJDBR9 FABJDCTL FABJDDIM FABJDEMP FABJDFCA FABJDFCN FABJDFC7 FABJDFC8 FABJDFC9 FABJDMPA FABJDMPN FABJDMP0 FABJDMP7 FABJDMP8 FABJDMP9 FABJDOPN FABJDPSA FABJDPSN FABJDPS7 FABJDPS8 FABJDPS9 FABJDPUT FABJDREQ FABJDRQS FABJDRSN FABJFCAI FABJFCCA FABJFCCM FABJFCCN FABJFCC7 FABJFCC8 FABJFCC9 FABJFCDA FABJFCDN FABJFCD7 FABJFCD8 FABJFCD9 FABJGDGB FABJGLRP FABJICDD FABJIDXA FABJIDXN FABJIDX7 FABJIDX8 FABJIDX9 FABJINT1 FABJINT2 FABJINT3 FABJIPRC FABJMAIN FABJMAS1 FABJMDPA FABJMDPN FABJMDP7 FABJMDP8 FABJMDP9 FABJMOD0 FABJMRGE FABJMSUL FABJNTFC FABJNTFI FABJNTFS FABJOFDD FABJOFL0 FABJOFL1 FABJOINT FABJORCA FABJORCN FABJORC7 FABJORC8 FABJORC9 FABJPARM FABJPRM2 FABJPRM3 FABJRCHA FABJRCHK FABJRCH7 FABJRCH8 FABJRCH9 FABJRDBA FABJRDB7 FABJRDB8 FABJRDB9 FABJRETC FABJRETM FABJRFCA FABJRFCN FABJRFC7 FABJRFC8 FABJRFC9 FABJRPT0 FABJRPT1 FABJSAS1 FABJSAS2 FABJSTA FABJSTMS FABJTERM FABJTGEN FABJTOI FABJUIC1 FABJXCR FABJXHPC FABJXLIM FABUARCN FABUMOD0
Fix information
Fixed component name
IMS HP IMAGE CO
Fixed component ID
5655K9600
Applicable component levels
R410 PSY UK42033
UP08/12/04 P F812
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG19M","label":"APARs - z\/OS environment"},"Platform":[{"code":"PF054","label":"z Systems"}],"Version":"4.1.0","Line of Business":{"code":"","label":""}}]
Document Information
Modified date:
14 December 2020