APAR status
Closed as new function.
Error description
FPA ANALYZE function is being enhanced to output the selected reports only. This is based off of FITS requirement MR041207678.
Local fix
Problem summary
**************************************************************** * USERS AFFECTED: All users of High Performance Fast Path * * Utilities Fast Path Advanced Tool Version 3 * * Release 2 (FMID: H31A320). * **************************************************************** * PROBLEM DESCRIPTION: Fast Path Advanced Tool (FPA) supports * * UOW REPORT suppression function. * **************************************************************** * RECOMMENDATION: Apply the maintenance for this APAR. * **************************************************************** This APAR allows FPA to suppress UOW REPORT or to specify UOW range of the UOW REPORT. This is a FITS requirement MR041207678.
Problem conclusion
Temporary fix
Comments
======================== = DOCUMENTATION CHANGE = ======================== The IMS High Performance Fast Path Utilities for z/OS User's Guide Volume 1: Fast Path Advanced Tool Version 3 Release 2 (SC18-9869-03). ---------------------------------------------------------------- Chapter 3. Fast Path Advanced Tool command Table 41. HFPSYSIN subcommands and keywords The following lines should be added as follows: Subcommand | Keywords -----------+--------------- REPORT | REPORTDD | | STARTUOW | | STOPUOW | | UOW_REPORT Table 42. HFPSYSIN keywords The following lines should be added as follows: Keyword | Purpose of the keyword -----------+-------------------------------------------------- | STARTUOW | Specifies UOW range of the UOW REPORT and | | the UOW EXCEPTION REPORT. | STOPUOW | Specifies UOW range of the UOW REPORT and | | the UOW EXCEPTION REPORT. | UOW_REPORT | Specifies whether to generate the UOW REPORT. ---------------------------------------------------------------- Chapter 9. Analyzing a DEDB Figure 80. REPORT subcommand keyword The following lines should be added as follows: +-------------------------------------------------+ | REPORTDD | | | STARTUOW | | | STOPUOW | | | UOW_REPORT | +-------------------------------------------------+ The following descriptions should be added after REPORTDD description as follows: -------------------------------------------------------------- STARTUOW An optional keyword to specify a number that defines the UOW where reporting in the UOW REPORT and the UOW EXCEPTION REPORT is to begin. For information about coding this parameter, see STARTUOW on page ### STOPUOW An optional keyword to specify a number that defines the UOW where reporting in the UOW REPORT and the UOW EXCEPTION REPORT is to end. For information about coding this parameter, see STOPUOW on page ### UOW_REPORT An optional keyword to specify whether to generate the UOW REPORT. For information about coding this parameter, see UOW_REPORTS on page ### ---------------------------------------------------------------- Appendix A. Command reference The following lines should be added in REPORT description as follows: -------------------------------------------------------------- REPORT Related keywords: REPORTDD | STARTUOW | STOPUOW | UOW_REPORT Syntax: +-------------------------------------------------+ |>>-- REPORT ---------------------------------><- | | | | | | +- REPORTDD=ddname ------+ | | | | | | | | +- STARTUOW=parameter ---+ | | | | | | | | +- STOPUOW=parameter ----+ | | | | | | | | +- UOW_REPORT=--- YES ---+ | | | +- NO -+ | +-------------------------------------------------+ -------------------------------------------------------------- The following description should be added as follows: -------------------------------------------------------------- STARTUOW Use this keyword to specify a number that defines the UOW where reporting in the UOW REPORT and the UOW EXCEPTION REPORT is to begin. STARTUOW is an optional keyword for the REPORT subcommand. Related keywords: STOPUOW UOW_REPORT Format: +-------------------------------------------------+ | STARTUOW=parameter | +-------------------------------------------------+ parameter Specify a value from 0 to 32767. This value must be specified less than or equal to the value specified by STOPUOW keyword. Default: STARTUOW=0 This keyword can be specified for the site default. -------------------------------------------------------------- STOPUOW Use this keyword to specify a number that defines the UOW where reporting in the UOW REPORT and the UOW EXCEPTION REPORT is to end. STOPUOW is an optional keyword for the REPORT subcommand. Related keywords: STARTUOW UOW_REPORT Format: +-------------------------------------------------+ | STOPUOW=parameter | +-------------------------------------------------+ parameter Specify a value from 0 to 32767. This value must be specified greater than or equal to the value specified by STARTUOW keyword. Default: STOPUOW=32767 This keyword can be specified for the site default. -------------------------------------------------------------- UOW_REPORT Use this keyword to specify whether to generate the UOW REPORT. UOW_REPORT is an optional keyword for the REPORT subcommand. Related keywords: STARTUOW STOPUOW Format: +-------------------------------------------------+ | UOW_REPORT=parameter | +-------------------------------------------------+ parameter parameter can be one of the following values: YES Generate the UOW REPORT. NO Do not generate the UOW REPORT. Default: UOW_REPORT=YES This keyword can be specified for the site default. -------------------------------------------------------------- ---------------------------------------------------------------- Appendix H. Messages and codes Messages The following message should be added as follows: -------------------------------------------------------------- HFPC0126E INCORRECT UOW RANGE SPECIFIED: STARTUOW=nnnnn, STOPUOW=mmmmm Explanation: An incorrect UOW range has been specified. STARTUOW must not be greater than STOPUOW. System action: If SCAN=YES is specified, the return code is set to 8. Or if SCAN=NO is specified, the job ends with an abend code of U3003. Programmer response: Correct the command set in HFPSYSIN, and rerun the job. -------------------------------------------------------------- ----------------------------------------------------------------
APAR Information
APAR number
PK59882
Reported component name
IMS HP FP UTILI
Reported component ID
5655K9400
Reported release
320
Status
CLOSED UR1
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2008-01-24
Closed date
2008-02-14
Last modified date
2008-03-04
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UK33694
Modules/Macros
HFPA5IN0 HFPA5UW0 HFPCCDT0 HFPCDEF0 HFPLRST0 HFPQFAC0 HFPUROB0 HFPWMTC0 HFPY2520 HFPZROB HFPZRSTE HFPZTTT H31A320J
| SC18986903 |
Fix information
Fixed component name
IMS HP FP UTILI
Fixed component ID
5655K9400
Applicable component levels
R320 PSY UK33694
UP08/02/15 P F802
[{"Business Unit":{"code":"BU048","label":"IBM Software"},"Product":{"code":"SSCX89D","label":"IMS HP Fast Path Utilities"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"3.2.0","Edition":"","Line of Business":{"code":"","label":""}}]
Document Information
Modified date:
04 March 2008