PK56321: NEW FUNCTION PROVIDES NON-RECOVERABLE SDEP SUPPORT **AE BY PK65219**

Obtain the fix for this APAR.

APAR status

• Closed as new function.

Error description

• New function is added to provide SDEPs as non-recoverable.
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: IMSFP V10 SDEP USERS                         *
  ****************************************************************
  * PROBLEM DESCRIPTION: New function added to allow DEDBs       *
  *                      that use SDEPs to be registered         *
  *                      as non recoverable.                     *
  ****************************************************************
  * RECOMMENDATION: INSTALL CORRECTIVE SERVICE FOR APAR/PTF      *
  ****************************************************************
  Nonrecoverable DEDBs must register with DBRC and are intended
  for use when data is nonessential and expendable. This new
  function allows nonrecoverable to extend to the SDEP portion
  of an area. It lifts the prior restriction disallowing a
  DEDB with SDEPs to be authorized. Prior to this change, message
  DFS3711A NONRECOVERABLE DEDB AUTHORIZATION ERROR DEDB=dddddddd
  AREA=aaaaaaaa was issued and the area with SDEPs was
  unauthorized and stopped. The area could be used once the DEDB
  was registered without the NONRECOV keyword by either INIT.DB
  or CHANGE.DB command.
                                 -
  This new function allows authorization of a DEDB that has
  SDEPs and registered with the NONRECOV keyword. If IMS
  should enter into REDO processing through an emergency restart
  ( ERE ), XRF, or FDBR action, recovery for that DEDB will be
  skipped.
  Message DFS3711W NONRECOVERABLE DEDB INTEGRITY WARNING
  REGISTRATION INCLUDED SDEPS is issued to indicate that SDEPs
  will not be recovered. This message is an indicator that the
  continued use of a nonrecoverable DEDB with SDEPs may result
  in errors and a ABENDU1026 if not reinitialized or restored
  from a valid backup.
  

Problem conclusion

Temporary fix

• The fix for this APAR is BAD.  If you need to apply
  the fix for this APAR to resolve a problem, you must
  also apply the fix for APAR PK65219.
  AE08/04/28
  

Comments

• THE FOLLOWING MODULES WERE MODIFIED TO CORRECT THE REPORTED
  PROBLEM:
  * DBFMPOP0 DBFERS20 DBFVPRO0 DBFCMOC1 DBFDBAU0 DBFESCD
  
  DBFMPOP0 - code modified to issue message DFS3711W when
  SDEPs have not been recovered and the area is in preopen
  processing. For example: an XRF alternate preopen after a
  TKO by the new active that did not REDO the SDEPs.
  
  DBFERS20 - code modified to issue message DFS3711W when
  SDEPs have not been recovered by an emergency restart.
  
  DBFVPRO0 - code modified to allow a VSO area to
  authorize if NONRECOV and SDEPs are present.
  
  DBFCMOC1 - code modified to allow a bulk open to
  proceed for an area if NONRECOV and SDEPs are present.
  
  DBFDBAU0 - code modified to allow area authorization
  when NONRECOV and SDEPs are present.
  
  DBFESCD - flag added to control DFS3711 messages.
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UK35862

Modules/Macros

• DBFCMOC1 DBFDBAU0 DBFERS20 DBFESCD  DBFMPOP0
  DBFVPRO0
  

Fix information

• Fixed component name

  IMS V10

• Fixed component ID

  5635A0100

Applicable component levels

• R010 PSY UK35862

     UP08/05/07 P F805

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.