PK41106: SUPPORT OF IMS V9 PTFS

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• This APAR allows HPIC V3.2 ( v320 320 ) to support the IMS V9.1
  ( v910 910 ) maintenance below:
  UK16668/PK25717
  UK19293/PK32035
  UK19612/PJ33060
  

Local fix

• No Work Around
  

Problem summary

• ****************************************************************
  * USERS AFFECTED: All IMS High Performance Image Copy for z/OS *
  *                 Version 3 Release 2 users ( FMID=H1J0320 )   *
  ****************************************************************
  * PROBLEM DESCRIPTION: This APAR includes following IMS APARs: *
  *                      - IMS V9                                *
  *                        PK25717, PK32035, PK33060             *
  *                                                              *
  *                      This APAR includes following APAR of    *
  *                      HPIC V4R1:                              *
  *                      - PK39461                               *
  *                                                              *
  *                      Also, this APAR fixes following         *
  *                      problem:                                *
  *                      - HPIC Recovery function terminates     *
  *                        with ABENDS0C4 ( ABEND0C4 ) when      *
  *                        issues DBRC command 'GENJCL.RECOV'.   *
  ****************************************************************
  * RECOMMENDATION: Apply the maintenance for this APAR.         *
  ****************************************************************
  This APAR includes following IMS APARs:
  PK25717 (IMS V9)
  - HPIC recovery function issues message DFS0792A ( MSGDFS0792A )
    and terminates with RC=8 when HPIC attempts forward recovery
    with the USEDBDS option.
    HPIC does not permit the output data set to contain data
    before applying change accumulation or log data when the input
    image copy is not provided.
  
  PK32035 (IMS V9)
  - The open error message DFS0730I A,10,09 was issued because
    with Online Reorg active, the target data set was opened in
    UPDATE mode when it should have been opened in LOAD mode.
    PK25717 changed DFSURDB0 such that if there is no image copy
    as input to DB Recovery, the target data set will be opened in
    UPDATE mode.  It should have also checked to make sure OLR is
    not active before opening in UPDATE mode.  Whenever OLR is
    active, the target data set must be opened in LOAD mode.
  
  PK33060 (IMS V9)
  - DFSURDB0 calls open close in load mode to format the output
    dataset of an OLR. The formatting does not include the
    partition ID and reorg number. This causes DFS0730I reason
    I,65 to be issued when DFSURDB0 next calls open close in
    UPDATE mode because the partition ID and Reorg number in the
    second CI of the dataset are both zero and DFSDDUI0 fails the
    open call.
  
  This APAR includes following APAR of HPIC V4R1:
  PK39461
  - After applying APAR PK35197 to HPIC V3R2, HPIC abends
    S0C1 ( ABEND0C1 ), when both DB record and DBDS record are
    not requester in DBRC at Image Copy function. Because HPIC
    mishandled RECON data set DCB that close it before fetching
    next RECON record. Both DBD record and DBDS record are not
    registered in DBRC with DBRC=Y is normal case. HPIC should
    not process diagnostic record and should not close DCB
    between fetching DBDS record and DB record.
  
  Also, this APAR fixes following problem:
  - HPIC Recovery function terminates with ABENDS0C4 ( ABEND0C4 )
    when issues DBRC command 'GENJCL.RECOV'.
    Because HPIC misses setting the address of parameter area for
    DBRC module.
  

Problem conclusion

• FABJRDB9 has been modified to include the following IMS fixes:
  - PK25717
  - PK32035
  - PK33060
  
  FABUARCN has been modified not to close DCB of RECON data set
  when both DB and DBDS record are not registered.
  
  FABJMAIN and FABJRCHK have been modified to distinguish whether
  HPIC should process diagnostic record or not with new internal
  flag.
  
  FABURRPD has been modified to add new internal flag which
  indicates whether HPIC should process diagnostic record or not.
  
  FABJDBRC has been modified to set correct address of parameter
  area for DBRC module.
  
  The following modules have been reassembled.
    FABJDBR7 FABJDBR8 FABJDBR9 FABJORC7 FABJORC8 FABJORC9 FABJRCH7
    FABJRCH8 FABJRCH9
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

  PK41105

• APAR is sysrouted TO one or more of the following:

  UK23096

Modules/Macros

• FABJARC0 FABJDBRC FABJDBR7 FABJDBR8 FABJDBR9
  FABJMAIN FABJORCN FABJORC7 FABJORC8 FABJORC9 FABJRCHK FABJRCH7
  FABJRCH8 FABJRCH9 FABJRDB9 FABUARCN FABURRPD
  

Fix information

• Fixed component name

  IMS HP IMAGE CO

• Fixed component ID

  5655K9600

Applicable component levels

• R320 PSY UK23096

     UP07/03/24 P F703

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.