PK30111: LOG READING PARALLELISM NUMBER OF ONE DIGIT CAN CAUSE S0C7

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• The "Defaults" panel has a field for entering the log reading
  parallelism maximum, and the value should be entered as a two
  digit number. If entered as a one digit number, an ABEND0C7
  (S0C7) can occur while generating JCL. The obvious workaround
  is to enter it as a two digit number (e.g., 02 rather than 2)
  if this APAR is not yet applied.
  
  If the value is left as 2, and the APAR is applied, the
  "Defaults" panel must still be entered once thereafter and the
  values saved. The APAR affects the code at the "Defaults" panel
  level, requiring this entry into the "Defaults" panel prior to
  successfully generating other JCL without a S0C7.
  

Local fix

• Enter the log reading parallelism maximum as a two digit number
  (e.g., 02 rather than 2) if this APAR is not yet applied.
  

Problem summary

• ****************************************************************
  * USERS AFFECTED: Users of DB2 Log Analysis Tool.              *
  ****************************************************************
  * PROBLEM DESCRIPTION: The "Defaults" panel has a field for    *
  *                      entering the log reading parallelism    *
  *                      maximum, and the value should be        *
  *                      entered as a two digit number. If it is *
  *                      entered as a one digit number, a S0C7   *
  *                      can occur while generating JCL. The     *
  *                      obvious workaround is to enter it as a  *
  *                      two digit number (e.g., 02 rather than  *
  *                      2) if this APAR is not yet applied. If  *
  *                      the value is left as 2, and the APAR is *
  *                      applied, the "Defaults" panel must      *
  *                      still be entered once thereafter and    *
  *                      the values saved. The APAR affects the  *
  *                      code at the "Defaults" panel level,     *
  *                      requiring this entry into the           *
  *                      "Defaults" panel prior to successfully  *
  *                      generating other JCL without a S0C7.    *
  ****************************************************************
  * RECOMMENDATION: APPLY the PTF.                               *
  ****************************************************************
  Code has been changed to correct this condition.
  

Problem conclusion

• APPLY the PTF.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    ALAUNCRE
  

Fix information

• Fixed component name

  DB2 LOG ANALYSI

• Fixed component ID

  5655E6601

Applicable component levels

• R230 PSY UK17795

     UP06/09/13 P F609

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.