PK18535: ICAT ENHANCEMENTS TO ENABLE FOR CUA CONFIGURATION AND ICAT FIXES

Obtain the fix for this APAR.

APAR status

• Closed as new function.

Error description

• SEVERAL ENHANCEMENTS AND FIXES
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: OMEGAMON XE for DB2 PE/DB2PM V310            *
  *                 users of component:                          *
  *                 -   CUA                                      *
  *                 -   ICAT                                     *
  ****************************************************************
  * PROBLEM DESCRIPTION: 1. Create Runtime members (DB2) fails   *
  *                         when a mixture of 4-character and    *
  *                         3-character subsystem IDs selected.  *
  *                      2. Usage of wrong variables for         *
  *                         generation of job D2#5x.             *
  *                      3. Incorrect order of PWH steps in      *
  *                         'Completing the configuration'.      *
  *                      4. Create additional runtime members    *
  *                         for Exception Processing threshold   *
  *                         datasets.                            *
  *                      5. History archive size should be       *
  *                         specified as 4MB or greater.         *
  *                      6. Externalize the KD5_D2_STC=          *
  *                         agent parameter in KD5ENV.           *
  *                      7. Error on ICAT panel KD260P7          *
  *                         when no volser is specified.         *
  *                      8. PWH instruction not shown            *
  *                         in complete the configuration !      *
  *                      9. Three character DB2 IDs cause        *
  *                         CLIST KD260CB2 to fail.              *
  *                      10. ICAT not creating OBVTM1            *
  *                         VTAMLST entry for use with OM/ISPF.  *
  *                      11. Old Agent Collectors Started        *
  *                         by ICAT obsolete with D5API.         *
  ****************************************************************
  * RECOMMENDATION:                                              *
  ****************************************************************
  

Problem conclusion

Temporary fix

Comments

• 1. Panel KD260CB2 causes a fatal error when three character
     DB2 subsystem IDs are specified.
  2. correct the job's
  3. Changed the order of PWH steps.
  4. Generate exception processing Threshold data sets.
  5. Panel KD260PE states that the snapshot history archive
     size should be specified as 4MB or greater, but the panel
     doesn't allow a value less than 10 as a minimu size.
  6. Externalize the KD5_D2_STC= agent parameter in KD5ENV.
     This allows the customer to connect to a specific OMEGAMON
     server when more than one is active in the system.
  7. Panel KD260P7 causes a fatal error when the volser
     fileds for the spacified datasets are left blank.
     Create a new message.
  8. Performance warehouse instructions in complete the
     configuration are not displayed in ICAT scrip KD260DFI
     when PWH for the 1st defined subsystem in the
     ISPF table is set to "N" for NO.
  9. CLIST KD260CB2 fails when three character DB2
     subsystem IDs are specified in panel KD260P2.
  10. Modified the following in ICAT
     "Complete the configuration":
     Step 4 - Complete the configuration for ISPF
     or TSO (VTPOOL).
  11. On ICAT Panels KD531P2 and KD531P3, there are
     time interval values for several old KDP collectors.
     Some of these collectors are obsolete because
     the data is now being collected using the D5API
     and do not need to be started.
  ----------------------------------------------------------------
  SYSMOD TITLE: ICAT CUA configuration
  KEYWORDS:  ICAT CUA
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    KD2BHELP KD2DDICT KD2JINIT KD2PLEXT KD2SBATO
  KD2SLEXT KD2SSVU2 KD260AT  KD260CB2 KD260CCU KD260CLR KD260COS
  KD260CP  KD260CSH KD260CSQ KD260CVA KD260CV1 KD260CXL KD260DFI
  KD260EP  KD260EX  KD260HAC KD260HDA KD260HDB KD260HDC KD260HDD
  KD260HG  KD260HGA KD260HGB KD260HGC KD260HK  KD260HN  KD260HNA
  KD260HNB KD260HNC KD260HND KD260HNE KD260HNM KD260HNO KD260HNP
  KD260HNQ KD260HNR KD260HO  KD260HOB KD260HOC KD260HOD KD260HOE
  KD260HOF KD260HOG KD260HPB KD260HRA KD260HS  KD260HSA KD260HSB
  KD260HSC KD260HSD KD260HSE KD260HSF KD260HSG KD260HSM KD260HSN
  KD260HSO KD260HX  KD260HZ  KD260HZA KD260HZB KD260HZC KD260H0
  KD260H0B KD260H2  KD260IC  KD260MCU KD260MC1 KD260MC2 KD260MC3
  KD260MO  KD260OS  KD260PB  KD260PC  KD260PD  KD260PE  KD260PH
  KD260PJ  KD260PK  KD260PL  KD260PM  KD260PO  KD260PQ  KD260PR
  KD260PS  KD260PT  KD260PU  KD260PW  KD260P7  KD260P8  KD260SAT
  KD260SC1 KD260SH  KD260SO1 KD260SO2 KD260SO3 KD260SPW KD260SQ
  KD260SS1 KD260SS5 KD260TC  KD260TP  KD2600PC KD2600R1 KD2600SC
  KD2600SP KD5BHELP KD5DDICT KD5SBATO KD531CCB KD531CCU KD531CDS
  KD531CPD KD531CUP KD531DFI KD531HUA KD531HUB KD531HUC KD531H2A
  KD531H2D KD531H2E KD531H2F KD531H2G KD531H2H KD531H2I KD531H3
  KD531H3A KD531H3B KD531H4  KD531MCU KD531P2  KD531P3  KD531P4
  KD531SJ2 KD531SMI KD5310RN KO2SNDXJ KO2SNDXP KO2SNJCU KO2SNJHS
  KO2SNPCU
  

Fix information

• Fixed component name

  OM XE DB2PE/PM/

• Fixed component ID

  5655OPE00

Applicable component levels

• R310 PSY UK14018

     UP06/05/03 P F605

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.