PI75767: QCF ISSUED /STO COMMAND NOT ISSUING THE CORRECT DEST TYPE AND TOSI CLIENT ADJUSTMENT NEEDED

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• Two issues encountered and addressed are:
  1. Change /STO command, issued from QCF client to address the
  correct destination type.
  2. TOSI client to issue RESPONSE with timer to avoid messages in
  client and control region.
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: Users of QCF 3.2                             *
  ****************************************************************
  * PROBLEM DESCRIPTION: When a destination needed to be stopped *
  *                      to be unloaded by QCF, QCFwas sending   *
  *                      incorrect /STO commands.                *
  ****************************************************************
  * RECOMMENDATION:                                              *
  ****************************************************************
  When a destination needed to be stopped to be unloaded by QCF,
  QCF was sending incorrect /STO commands.  With the fix the
  following commands will be issued:
  
  LTERM = STOP LTERM ltermname
  APPC = STOP LUNAME luname
  OTMA = STOP TMEMBER tmember TPIPE tpipe
  TRAN = STOP TRAN tranname
  
  Also, the TOSI timer with QCF-s request to STOP a destination is
  set to be 3 seconds. If no response from TOSI is returned, QCF
  will issue message IQC3312E which states that the STOP command
  failed (no destination is stopped). Additionally, TOSI calls to
  stop a destination has been updated and reorganized to be issued
  in the correct sequence.
  
  IQC3318I is issued if a STOP cannot be issued against a
  destination i.e. destination is not an LTERM, APPC, OTMA, or
  TRAN destination.
  

Problem conclusion

• Install the APAR to have QCF build the correct /STO commands to
  stop destinations when they need to be unloaded.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UI54026

Modules/Macros

•    IQCM2ENU IQCXJOIN
  

Fix information

• Fixed component name

  IMS QUEUE CNTL

• Fixed component ID

  5697E9900

Applicable component levels

• R320 PSY UI54026

     UP18/02/24 P F802

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.