PI62294: SYSTEM COMPLETION CODE=SA0A-10 OR S30A-24 AT CKZ00600+D72

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• The SA0A and S30A abends are caused by an incorrect branch from
  a subroutine to a location outside of the subroutine without
  performing return to caller housekeeping.  This causes two
  iterations of the same freemain for the same storage to be
  performed.
  This incorrect branch and subsequent SA0A or S30A may occur when
  an exception occurs while attempting to reconnect to DB2 during
  log apply processing.  However, in this specific case,
  DATA-MOVER(PGM(SRCIMCPY) is specified and an image copy was not
  found.  The process then attempts to reconnect to the source
  DB2.
  But the process is already connected to the source DB2.  The
  reconnect attempt causes the source DB2 to return 00C10201.
  The exception causes an incorrect branch to occur resulting in
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: Users of DB2 Cloning Tool for Z/OS V3.1      *
  ****************************************************************
  * PROBLEM DESCRIPTION: SYSTEM COMPLETION CODE=SA0A-10 OR       *
  *                      S30A-24 AT CKZ00600+D72                 *
  ****************************************************************
  * RECOMMENDATION:                                              *
  ****************************************************************
  The SA0A and S30A abends are caused by an incorrect branch from
  a subroutine to a location outside of the subroutine without
  performing return to caller housekeeping.  This causes two
  iterations of the same freemain for the same storage to be
  performed.
  This incorrect branch and subsequent SA0A or S30A may occur when
  an exception occurs while attempting to reconnect to DB2 during
  log apply processing.  However, in this specific case,
  DATA-MOVER(PGM(SRCIMCPY)) is specified and an image copy was not
  found.  The process then attempts to reconnect to the source
  DB2.
  But the process is already connected to the source DB2.  The
  reconnect attempt causes the source DB2 to return 00C10201.
  The exception causes an incorrect branch to occur resulting in
  this problem.
  

Problem conclusion

• Code has been added to correct this issue.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    CKZ00616
  

Fix information

• Fixed component name

  DB2 CLONING TOO

• Fixed component ID

  5655N1000

Applicable component levels

• R310 PSY UI38974

     UP16/07/06 P F607

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.