PI12789: FORWARD FIT (ROLLUP) OF V120 IMS FAST PATH SOLUTION PACK APAR'S

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• Rollup (forward fit) of the following V120 maintenance:
  PI06811 / UI13468
  PI07604 / UI13518
  PI07609 / UI13657
  PI08591 / UI14051
  PI08083 / UI15752
  PI08199 / UI16461
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: All users of HPFPU Fast Path Advanced        *
  *                 Tools, HPFPU Fast Path Online Tools, and DB  *
  *                 Sensor in Fast Path Solution Pack Version 1  *
  *                 Release 3 (FMID: HAHQ130).                   *
  ****************************************************************
  * PROBLEM DESCRIPTION: Forward Fit APAR of the following 6     *
  *                      FPSP V1R2 APARs;                        *
  *                      - PI06811                               *
  *                      - PI07604                               *
  *                      - PI07609                               *
  *                      - PI08083                               *
  *                      - PI08199                               *
  *                      - PI08591                               *
  *                                                              *
  *                      The following problems are also         *
  *                      included.                               *
  *                      1.FPA main task abends with HFPMESTx    *
  *                      0C4 when the subtask abends.            *
  *                      2.Missing ONLINE POINTER CHECKER        *
  *                      STATISTICS report in FPXRPTS when       *
  *                      OPC is performed with SYSIN DD          *
  *                      3.Add VSO status to ONLINE POINTER      *
  *                      CHECKER STATISTICS report.              *
  ****************************************************************
  * RECOMMENDATION: Apply the maintenance for this APAR.         *
  ****************************************************************
  Forward Fit APAR of FPSP V1R2 PI06811.
  1. Unable to save Sensor Data when exceptions occur with
  SENSOR_UOW=YES and THRESHOLD is specified due to exit condition.
  2. ABEND occurs when SEGLDIST=YES and the DB has ROOT and SDEP
  segments only.
  
  Forward Fit APAR of FPSP V1R2 PI07604.
  There was a problem that Online Pointer Checker was checking the
  length of SDEP control segment.
  Therefore, Online Pointer Checker issued error ONLINE POINTER
  SCAN REPORT in FPXRPTS DD.
  
  Forward Fit APAR of FPSP V1R2 PI07609.
  The DAR13SO work data set can be allocated dynamically when
  . FULLSTEP=YES and TYPRUN=PTRALL/RPT are specified for OPC
  . PTRCHK=YES, FULLSTEP=YES and TYPRUN=PTRALL/RPT are specified
    for OER
  However, the estimation for the primary size of the DAR13SO
  work data set is too small when the average segment length
  in DBD definition is much larger than the actual average
  segment length, which caused B37.
  
  Forward Fit APAR of FPSP V1R2 PI08083.
  Running of HFPMAIN0 to unload a DEDB, informational message
  HFPD0001I is written on two lines to the SYSLOG. The message
  is incorrectly written with SYSLOG Record type N, which
  means "single line message". System automation cannot interpret
  the second line as it determines each line to be a separate
  message.
  
  Forward Fit APAR of FPSP V1R2 PI08199.
  1. FPA Analyze function:
  Even if an incorrect CI RBA value is set at the end of a CI, FPA
  Analyze function does not report the problem of the incorrect CI
  RBA value and continues processing with no error.
  2. FPO utilities:
  Even if an incorrect CI RBA value is set at the end of a CI, FPO
  utilities do not report the problem of the incorrect CI RBA
  value. Instead, FPO utilities issue FPX0011E message and ends
  with ABENDU3500.
  
  Forward Fit APAR of FPSP V1R2 PI08591.
  ODE with SDEPHIER=YES option extracted the same SDEP segments
  twice, when their parent ROOT segment was located in an IOVF CI,
  and this IOVF CI was re-read for processing of the next ROOT
  segment.
  
  The issues that have been fixed in FPSP V1R2 and are not listed
  above have been fixed in FPSP V1R3 GA level and PI06716.
  
  Problems that are fixed only for FPSP V1R3.
  1.HFPMESTx 0C4 abend occurs when main task other than abend
  occurs.
  2.FPXRPTS DD does not output ONLINE POINTER CHECKER STATISTICS
  report when used DASYSIN DD for OPC.
  3.ONLINE POINTER CHECKER STATISTICS report does not output VSO
  status for OPC or OER.
  

Problem conclusion

• Forward Fit APAR of FPSP V1R2 PI06811.
  1. Changed exit condition to store Sensor data even if exception
  occurs.
  2. Modified to take the DB of ROOT and SDEP segments only
  correctly.
  
  Forward Fit APAR of FPSP V1R2 PI07604.
  When CI has SDEP control segment, checking of SDEP segment
  length will not be performed.
  
  Forward Fit APAR of FPSP V1R2 PI07609.
  OPC and OER have been modified to adjust the primary and
  secondary sizes for the work data sets when the calculated
  primary size is smaller than 1CYLINDER.
  
  Forward Fit APAR of FPSP V1R2 PI08083.
  When a message id has the multiple text lines to SYSLOG, the
  FPA changes to write them as one multiple-text message.
  The message ids for abend are still written as a single line
  message because those line messages have the specific message
  id. The FPO does not have the multiple text lines to SYSLOG.
  
  Forward Fit APAR of FPSP V1R2 PI08199.
  1. FPA Analyze function:
  FPA Analyze function has been modified to check the integrity of
  the CI RBA value. FPA Analyze function checks the CI RBAs of all
  CIs including 1st CI and 2nd CI, but except for the CIs in reorg
  UOW.
  If an incorrect RBA value is set at the end of a CI, FPA Analyze
  function issues a message in the Resolve Pointers report,
  generates a snap dump when CISNAP=YES is specified, and counts
  as a pointer error.
  2. FPO utilities:
  FPO utilities have been modified to check the integrity of the
  CI RBA value.
  If an AO status code is returned when FPO utilities read CIs,
  FPO utilities issue FPX0011E message and end with ABENDU3500 as
  before, and also check the integrity of the RBA value of the CI
  that is failed to read. If an incorrect RBA value is set at the
  end of a CI, FPO utilities issue FPX0339E message.
  
  Forward Fit APAR of FPSP V1R2 PI08591.
  ODE has been modified not to extract the SDEP segments when an
  IOVF CI is re-read, where their parent ROOT segment is located.
  Because these SDEP segments are already extracted in the
  previous processing.
  
  
  Problems that are fixed only for FPSP V1R3.
  1.FPA have been modified to not release work area for estae
  process.
  2.OPC have been modified to output ONLINE POINTER CHECKER
  STATISTICS report to FPXRPTS DD when used DASYSIN DD.
  3.OPC have been modified to output VSO status in ONLINE
  POINTER CHECKER STATISTICS report.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UI16975

Modules/Macros

• FPXACRBB FPXACRBC FPXACRBD FPXADRVB FPXADRVC FPXADRVD FPXALIF0
  FPXASDP0 FPXASUM0 FPXBTOA0 FPXBWTOR FPXCONS0 FPXDLIEB FPXDLIEC
  FPXDLIED FPXDSDP0 FPXESDP0 FPXGSEGB FPXGSEGC FPXGSEGD FPXMBLK0
  FPXMSG00 FPXPSDP0 FPXQOPN0 FPXUSDR0 HAHQ130J HFPAS1D0 HFPA1DC0
  HFPA1I10 HFPA1P10 HFPA1SD0 HFPA4SN0 HFPA5H20 HFPA5SR0 HFPLSNC0
  HFPMAIN0 HFPOMGT0 HFPQMAI0 HFPREST0 HFPSENSR HFPSPMST HFPSTGEN
  HFPVICG0 HFPVICI0 HFPWPRC0
  

Fix information

• Fixed component name

  IMS FP SOLUTION

• Fixed component ID

  5655W1400

Applicable component levels

• R130 PSY UI16975

     UP14/04/13 P F404

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.