IBM Support

PH73690: REMOVE SUPPORT FOR HPU V4.3 AND ADD [TOLERATION] SUPPORT FOR HPUV5.2 AND V6.1

A fix is available

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as new function.

Error description

  • This PTF will remove support for HPU V43 - and will add
    [toleration] support for both HPU V5.2 and V6.1.
    (Support for HPU V5.1 will remain in effect).
    This fix includes the following:
    TCz panel CCQPPRD will be modified to:
    1) remove "430" from the list of acceptable HPU ver/rel/mods
    2) add "520" to the list of acceptable HPU ver/rel/mods
    3) add "610" to the list of acceptable HPU ver/rel/mods
    
    DAJ SETUP panel DAJPNL5 will be modified to:
    1) remove "430" from the list of acceptable HPU ver/rel/mods
    2) add "520" to the list of acceptable HPU ver/rel/mods
    3) add "610" to the list of acceptable HPU ver/rel/mods
    
    The Job Build for an HPU job will result in the proper HPU
    LOADLIB(s) being specified in STEPLIB dependent upon
    what was specified in TCz panel CCQPPRD and/or SETUP panel
    DAJPNL5.
    

Local fix

  • N/A
    

Problem summary

  • ****************************************************************
    * USERS AFFECTED: All Users.                                   *
    ****************************************************************
    * PROBLEM DESCRIPTION: This PTF will remove support for HPU    *
    *                      V43 - and will add [toleration] support *
    *                      for both HPU V5.2 and V6.1.             *
    *                      (Support for HPU V5.1 will remain in    *
    *                      effect).                                *
    *                                                              *
    *                      This fix includes the following:        *
    *                                                              *
    *                      TCz panel CCQPPRD will be modified to:  *
    *                      1) remove "430" from the list of        *
    *                      acceptable HPU ver/rel/mods             *
    *                      2) add "520" to the list of acceptable  *
    *                      HPU ver/rel/mods                        *
    *                      3) add "610" to the list of acceptable  *
    *                      HPU ver/rel/mods                        *
    *                                                              *
    *                      DAJ SETUP panel DAJPNL5 will be         *
    *                      modified to:                            *
    *                      1) remove "430" from the list of        *
    *                      acceptable HPU ver/rel/mods             *
    *                      2) add "520" to the list of acceptable  *
    *                      HPU ver/rel/mods                        *
    *                      3) add "610" to the list of acceptable  *
    *                      HPU ver/rel/mods                        *
    *                                                              *
    *                      The Job Build for an HPU job will       *
    *                      result in the proper HPU LOADLIB(s)     *
    *                      being specified in STEPLIB dependent    *
    *                      upon what was specified in TCz panel    *
    *                      CCQPPRD and/or SETUP panel DAJPNL5.     *
    ****************************************************************
    * RECOMMENDATION: APPLY the PTF                                *
    ****************************************************************
    .
    

Problem conclusion

Temporary fix

Comments

APAR Information

  • APAR number

    PH73690

  • Reported component name

    AUTOMATION EXPE

  • Reported component ID

    5698DAE00

  • Reported release

    110

  • Status

    CLOSED UR1

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    YesSpecatt / New Function / Xsystem

  • Submitted date

    2026-10-20

  • Closed date

    2026-10-30

  • Last modified date

    2026-11-03

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

    UO10219

Modules/Macros

  • DAJ#SCHD DAJ$$PRM DAJ$ADM2 DAJ$ADM5 DAJ$BSHU DAJ$HPTO DAJ$HPUO
    DAJ$TASK DAJ727E  DAJALPHT DAJALSPT DAJAMPER DAJBLNKT DAJCHART
    DAJDSNVT DAJDSNXT DAJHEXT  DAJHHPUO DAJHLP3  DAJHPNL5 DAJNAMET
    DAJNBLKT DAJNNUMT DAJPNL3  DAJPNL5
    

Fix information

  • Fixed component name

    AUTOMATION EXPE

  • Fixed component ID

    5698DAE00

Applicable component levels

  • R110 PSY UO10219

       UP26/11/03 I 1000  

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.

[{"Business Unit":{"code":"BU048","label":"IBM Software"},"Product":{"code":"SSSXEC9","label":"IBM Db2 Automation Expert for z\/OS"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"110","Line of Business":{"code":"LOB70","label":"Z TPS"}}]

Document Information

Modified date:
03 November 2026