A fix is available
APAR status
Closed as program error.
Error description
z/OS Debugger service 17.0.4 for IBM Developer for z/OS Enterprise Edition 17.0.4 IBM Developer for z/OS 17.0.4 IBM Debug for z/OS 17.0.4 IBM Test Accelerator for Z. Note For installations that install the Japanese FMID JADRH0J and use NATLANG(JPN) or SET NATIONAL LANGUAGE JPN to select Japanese messages: Because of build problems, the normal matching Japanese JADRH0J PTF for this base HADRH00 PTF will not be built and shipped. This should be corrected by the time the next PTF comes out. This means that the VvRrMm in the copyright messages will still show 17.0.3.2 EQA1336I IBM z/OS Debugger 17.0.3.2 EQA2441I IBM z/OS Debugger 17.0.3.2 The 2nd line of output of CALL %VER will, however, show the proper VvRrMm 17.0.4. --- Features --- See "What's new in IBM z/OS Debugger" in the z/OS Debugger documentation for any new features, if any, included in this service. --- End Features --- --- Service --- -The IMS Isolation profile dialog fails to filter transactions based on the input pattern. Consequently, all transactions are displayed rather than those matching the specified criteria. (PH68394 at 17.0) -JCL built by z/OS Debugger Utilities is incorrect when the original JCL contains RLSE sub-parameter of SPACE. (PH68681 at 16.0) -CICS: ABENDS0C7 in EQADCXXT. A DTCN profile contained a non-numeric character where a decimal number was expected. The validity check at time of profile definition flags the error but does not prevent saving of an invalid profile. (PH68659 at 16.0) -Corrections to COBOL IVPs. Some variables are not properly set to zero. (PH68929 at 16.0) -Message IEW2751S received during TAZ activity or in an debug session. z/OS Debugger uses binder services to retrieve data for executing programs. Binder issues message IEW2751S when requested to read a module that was loaded by an alias, and whose major name points to a different module in the load-library concatenation. (PH69256 at 17.0) -EQA9930W message displayed for debugging compiled programs on code page IBM-5026. (PH69713 at 16.0) -z/OS Debugger ABEND IN CICS ABCODE = 4088 REASON = 0000006F. This is a storage violation. The address and length fields contain character data, "DSNHLI.." in this case EQA9981I - EQA00STO Internal Error 00000004 EQA9981I - Xsto_Func = 00B70001 Module = 0EMG EQA9981I - Next_Frag->Sto_Frag_Nxt = C4E2D5C8 DSNH EQA9981I - Next_Frag->Sto_Frag_Len = D3C90000 LI CEE1000S z/OS INTERNAL ABEND. ABCODE = 4088 REASON = 0000006F EQA_DBG_DBRM environment variable specifies a list of data sets. When parsing the list, Debugger does not expect to find brackets in data set names. The output is invalid when a member name is specified along with the PDS name. Usually, a PDS name alone is sufficient because debugger then will use the program's name as the name of a member to read. (PH68928 at 16.0) -When macro EQAMODIN is in use, the debugger marks incorrect lines as self modifying in Assembler source with multiple CSECTs. (PH69710 at 17.0) -EQAJCL displays steps in the selection panel which can not be executed. It should only display executable steps. JCL contains : //CYBGB01E JOB 5655-Q10,MSGLEVEL=(1,1),MSGCLASS=A, // NOTIFY=&SYSUID //S1 EXEC PGM=IEFBR14 // //S2 EXEC PGM=IEFBR14 EQAJCL is displaying S2 too,but if you submit the JCL S2 will not be executed. (PH69712 at 17.0) RDS/CC fixes marked against 5724T0700 -Display problems in Code Coverage report in PDF format for programs containing Japanese characters. 2 problems have been reported: 1) layout misalignment for lines containing Japanese text 2) some Japanese characters are replaced by the hash symbol (#) (PH69409 at 17.0) For COBOL V5 and V6: FIXCAT KEYWORD: COB0501T/K COB0502T/K COB0601T/K COB0602T/K COB0603T/K COB0604T/K COB0605T/K For z/OS Debugger: FIXCAT KEYWORD: DEBUGGER/K --- End Service ---
Local fix
Problem summary
**************************************************************** * USERS AFFECTED: z/OS Debugger 17.0 users who need the * * features or have the problems described in * * the Problem Description. * **************************************************************** * PROBLEM DESCRIPTION: z/OS Debugger service 17.0.4 for * * * * IBM Developer for z/OS * * Enterprise Edition 17.0.4 * * IBM Developer for z/OS 17.0.4 * * IBM Debug for z/OS 17.0.4 * * * * IBM Test Accelerator for Z. * * * * * * Note * * * * For installations that install the * * Japanese FMID JADRH0J and use * * NATLANG(JPN) or SET NATIONAL LANGUAGE * * JPN to select Japanese messages: * * * * Because of build problems, the normal * * matching Japanese JADRH0J PTF for * * this base HADRH00 PTF will not be * * built and shipped. * * * * This should be corrected by the time * * the next PTF comes out. * * * * This means that the VvRrMm in the * * copyright messages will still show * * 17.0.3.2 * * * * EQA1336I IBM z/OS Debugger 17.0.3.2 * * EQA2441I IBM z/OS Debugger 17.0.3.2 * * * * The 2nd line of output of CALL %VER * * will, however, show the proper VvRrMm * * 17.0.4. * * * * * * --- Features --- * * * * See "What's new in IBM z/OS Debugger" * * in the z/OS Debugger documentation for * * any new features, if any, included in * * this service. * * * * * * --- End Features --- * * * * * * --- Service --- * * * * -The IMS Isolation profile dialog * * fails to filter transactions based on * * the input pattern. * * * * Consequently, all transactions are * * displayed rather than those matching * * the specified criteria. * * * * (PH68394 at 17.0) * * * * * * -JCL built by z/OS Debugger Utilities * * is incorrect when the original JCL * * contains RLSE sub-parameter of SPACE. * * * * (PH68681 at 16.0) * * * * * * -CICS: ABENDS0C7 in EQADCXXT. * * * * A DTCN profile contained a * * non-numeric character where a decimal * * number was expected. The validity * * check at time of profile definition * * flags the error but does not prevent * * saving of an invalid profile. * * * * (PH68659 at 16.0) * * * * * * -Corrections to COBOL IVPs. Some * * variables are not properly set to * * zero. * * * * (PH68929 at 16.0) * * * * * * -Message IEW2751S received during TAZ * * activity or in an debug session. * * * * z/OS Debugger uses binder services to * * retrieve data for executing programs. * * Binder issues message IEW2751S when * * requested to read a module that was * * loaded by an alias, and whose major * * name points to a different module in * * the load-library concatenation. * * * * (PH69256 at 17.0) * * * * * * -EQA9930W message displayed for * * debugging compiled programs on code * * page IBM-5026. * * * * (PH69713 at 16.0) * * * * * * -z/OS Debugger ABEND IN CICS ABCODE = * * 4088 REASON = 0000006F. * * * * This is a storage violation. The * * address and length fields contain * * character data, "DSNHLI.." in this * * case * * * * EQA9981I - EQA00STO Internal Error * * 00000004 * * EQA9981I - Xsto_Func = 00B70001 * * Module = 0EMG * * EQA9981I - Next_Frag->Sto_Frag_Nxt = * * C4E2D5C8 DSNH * * EQA9981I - Next_Frag->Sto_Frag_Len = * * D3C90000 LI * * CEE1000S z/OS INTERNAL ABEND. ABCODE * * = 4088 REASON = 0000006F * * * * EQA_DBG_DBRM environment variable * * specifies a list of data sets. When * * parsing the list, Debugger does not * * expect to find brackets in data set * * names. The output is invalid when a * * member name is specified along with * * the PDS name. Usually, a PDS name * * alone is sufficient because debugger * * then will use the program's name as * * the name of a member to read. * * * * (PH68928 at 16.0) * * * * * * -When macro EQAMODIN is in use, the * * debugger marks incorrect lines as * * self modifying in Assembler source * * with multiple CSECTs. * * * * (PH69710 at 17.0) * * * * * * -EQAJCL displays steps in the * * selection panel which can not be * * executed. It should only display * * executable steps. * * * * JCL contains : * * //CYBGB01E JOB 5655-Q10, * * MSGLEVEL=(1,1),MSGCLASS=A, * * NOTIFY=&SYSUID * * //S1 EXEC PGM=IEFBR14 * * // * * //S2 EXEC PGM=IEFBR14 * * * * EQAJCL is displaying S2 too,but if * * you submit the JCL S2 will not be * * executed. * * * * (PH69712 at 17.0) * * * * * * RDS/CC fixes marked against 5724T0700 * * * * -Display problems in Code Coverage * * report in PDF format for programs * * containing Japanese characters. * * * * 2 problems have been reported: * * * * 1) layout misalignment for lines * * containing Japanese text * * * * 2) some Japanese characters are * * replaced by the hash symbol (#) * * * * (PH69409 at 17.0) * * * * * * For COBOL V5 and V6: * * FIXCAT KEYWORD: COB0501T/K COB0502T/K * * COB0601T/K COB0602T/K * * COB0603T/K COB0604T/K * * COB0605T/K * * * * For z/OS Debugger: * * FIXCAT KEYWORD: DEBUGGER/K * * * * --- End Service --- * **************************************************************** * RECOMMENDATION: Installations that need these problem fixes * * should install this service. * **************************************************************** Miscellaneous service.
Problem conclusion
Service available.
Temporary fix
Comments
APAR Information
APAR number
PH70010
Reported component name
ZOS DEBUGGER
Reported component ID
5724T0713
Reported release
H00
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2026-02-05
Closed date
2026-02-24
Last modified date
2026-03-02
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UO06929
Modules/Macros
BZU2CLCT BZU2TABL BZUACMPR BZUACNFG BZUADCMP BZUAFREE BZUAGAID BZUAGETM BZUAMOUT BZUAMSGS BZUAPARM BZUARGID BZUASTMG BZUATABL BZUAWREC BZUCDEFN BZUCINFO BZUDCLCT BZUDCP BZUDCPPX BZUDDFLT BZUDTABL BZUEDFLT BZUF0208 BZUF2020 BZUF2404 BZUF5212 BZUF5214 BZUF5412 BZUF7832 BZUF7834 BZUFC412 BZUFCLCT BZUFFNCT BZUFTABL BZUHCLCT BZUHTABL BZUJCLCT BZUJTABL BZUKCLCT BZUKTABL BZULCLCT BZULINK BZULTABL BZUMSGEN BZURMSGS BZURUN BZUUCLCT BZUUTABL BZUVCLCT BZUVTABL BZUWCLCT BZUWTABL BZUX0202 BZUX0204 BZUX0206 BZUX020A BZUX06XX BZUX0C02 BZUX0C04 BZUX0E02 BZUX0E06 BZUX0E08 BZUX0E0A BZUXCLCT BZUXCOPY BZUXDFLT BZUXNARG BZUXNUMB BZUXPAID BZUXTABL BZUXVLTH BZUZCLCT BZUZTABL EQA00A64 EQA00ABE EQA00AEH EQA00AEI EQA00AIO EQA00ALO EQA00AMD EQA00ANC EQA00ANL EQA00BKP EQA00BLD EQA00BLK EQA00BND EQA00BPP EQA00C00 EQA00C53 EQA00C62 EQA00C63 EQA00C64 EQA00C65 EQA00C66 EQA00C67 EQA00C68 EQA00C69 EQA00C70 EQA00C71 EQA00C72 EQA00C73 EQA00C74 EQA00C75 EQA00C76 EQA00CCV EQA00CCX EQA00CEC EQA00CEE EQA00CEM EQA00CEX EQA00CHG EQA00CIC EQA00CND EQA00CTX EQA00CUS EQA00CV EQA00CVC EQA00CVT EQA00DBG EQA00DBH EQA00DBI EQA00DBJ EQA00DCL EQA00DEH EQA00DEI EQA00DLD EQA00DMM EQA00DSF EQA00DTA EQA00DTC EQA00DTL EQA00DU EQA00E40 EQA00E41 EQA00E53 EQA00E62 EQA00E63 EQA00E64 EQA00E65 EQA00E66 EQA00E67 EQA00E68 EQA00E69 EQA00E70 EQA00E71 EQA00E72 EQA00E73 EQA00E74 EQA00E75 EQA00E76 EQA00EH2 EQA00EHB EQA00EHI EQA00EMG EQA00ENV EQA00ER0 EQA00ER1 EQA00EVH EQA00EXE EQA00FA EQA00FIN EQA00FRE EQA00GCC EQA00GDD EQA00GDF EQA00GDG EQA00GDP EQA00GDV EQA00GFU EQA00GFV EQA00GIV EQA00GLV EQA00GPA EQA00GSV EQA00GTO EQA00HFS EQA00HKN EQA00HKS EQA00INT EQA00IPD EQA00KBM EQA00LAM EQA00LBL EQA00LCM EQA00LDD EQA00LDR EQA00LDU EQA00LDW EQA00LDX EQA00LDY EQA00LIS EQA00LLC EQA00LLF EQA00LLH EQA00LLT EQA00LMS EQA00LNG EQA00LNK EQA00LRC EQA00LSE EQA00LST EQA00MDP EQA00MEM EQA00NAM EQA00NML EQA00NMU EQA00NTC EQA00OEH EQA00OEI EQA00OHB EQA00OHC EQA00OHD EQA00OHE EQA00OHH EQA00OHI EQA00OHL EQA00OHT EQA00OHV EQA00OSX EQA00PBK EQA00PDM EQA00POP EQA00PST EQA00QCS EQA00QFY EQA00QNS EQA00QRY EQA00QSS EQA00REG EQA00RES EQA00RPB EQA00RSV EQA00RUN EQA00RWD EQA00SBM EQA00SET EQA00SRT EQA00STO EQA00STR EQA00STT EQA00STU EQA00SVC EQA00TMM EQA00TMX
Fix information
Fixed component name
ZOS DEBUGGER
Fixed component ID
5724T0713
Applicable component levels
RH00 PSY UO06929
UP26/02/28 P F602
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU029","label":"Software"},"Product":{"code":"SSVSZX","label":"IBM Debug for z Systems"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"H00"}]
Document Information
Modified date:
02 March 2026