PH67775: ON-DEMAND DEV AND TEST ENVIRONMENT 1.X: EXTRACTION FAILS WITH AN ABEND AND ERROR CODE 31324

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• Test Accelerator for Z (TAZ): On-demand Dev and Test environment
  for z/OS 1.x
  
  After using OMPROUTE config to replace static TCP/IP BEGINROUTES
  
  definitions, Create Component process (i.e. extraction) fails
  with the
  following Abend error in the UI:
  
  Attention required
  
  An ABEND occurred on the IBM Z mainframe with the following
  output.
  .
  .
  Code: 31324
  
  The content of the ABEND shows SYSTEM COMPLETION CODE=0C4:
  
  /ABCDEF/usr/lpp/IBM/odtz > sfeuauth="AAAAA.BBBB.CCCCCCCC"
  _BPXK_JOBLOG=STDERR /usr/lpp/IBM/odtz/feuc jvollist
  10.15.12 STC29361  IEA995I SYMPTOM DUMP OUTPUT  841
  841             SYSTEM COMPLETION CODE=0C4  REASON CODE=00000011
  
  841              TIME=10.15.11  SEQ=00109  CPU=0000  ASID=019B
  841              PSW AT TIME OF ERROR  078D0000   C1D4C188  ILC
  6  INTC 11
  841                ACTIVE MODULE
  ADDRESS=00000000_41D4C000  OFFSET=00000188
  841                NAME=FEUSI002
  841                DATA AT PSW  41D4C182 - D2007010  5008D20F
  70145020
  841                AR/GR 0: 00000000/00000048   1:
  00000000/41E03EF8
  841                      2: 00000000/41D55000   3:
  00000000/41D421D8
  841                      4: 01FF000A/41D55040   5:
  00000000/41E03FF0
  841                      6: 00000000/FFFFDD01   7:
  00000000/41E03EF8
  841                      8: 00000000/00000024   9:
  00000000/00000001
  841                      A: 00000000/00000003   B:
  00000000/000101D8
  841                      C: 00000000/C1D4C000   D:
  00000000/41D420D0
  841                      E: 00000000/0000030B   F:
  00000000/00000000
  841              END OF SYMPTOM DUMP
  10.15.12 STC29361  BPXP018I THREAD 47AC300000000000, IN PROCESS
  67111741, ENDED  843
  843             WITHOUT BEING UNDUBBED WITH COMPLETION CODE
  940C4000
  843             , AND REASON CODE 00000011.
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: Customers creating components from a         *
  *                 Extracted type z/OS source system            *
  ****************************************************************
  * PROBLEM DESCRIPTION: OMPROUTE config causing ABEND 0C4       *
  ****************************************************************
  z/OS Extraction Utilities: Creating a component will fail with
  ABEND 0C4 if the user uses OMPROUTE config to replace static
  TCP/IP BEGINROUTES definitions
  

Problem conclusion

• Creating component should be proceeding successfully
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UO04612

Modules/Macros

• FEU1SMPE FEU2RCVE FEU3ALOC FEU4ZFS  FEU5MKD  FEU6DDEF FEU7APLY
  FEU8ACPT FEUBLDT  FEUC     FEUCLI   FEUCLINF FEUCSTUB FEUCUTIL
  FEUCVOLI FEUCVPRM FEUDCAT  FEUDSL01 FEUDSL02 FEUDSS   FEUDSS1D
  FEUGSFTP FEUMKDIR FEUMOUNT FEURXDPJ FEURXDPL FEURXEXT FEUSI001
  FEUSI002 FEUVIMG  FEUXDDLP FEUXLOAD FEUXRDDL FEUXSQLP FEUXTBDT
  FEUXUNLD FEUXVERS FEUZCPT  FEUZLDFL FEUZSFTP
  

Fix information

• Fixed component name

  Z/OS EXT UTILIT

• Fixed component ID

  5725G3923

Applicable component levels

• RF10 PSY UO04612

     UP25/08/30 P F508

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.