PH63906: PRODUCT QUALITY IMPROVEMENTS

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• 1. Customer is performing COMPARE of two EXTRACT files on TAPE.
  There is an error allocating a temporary disk data set needed
  for processing of TAPE EXTRACT files. The following System Error
  may be displayed:
  
  IBM InfoSphere Optim System Error Structure - ErrCB
  ErrCB.ID      : ZZZERRCBZZ
  SysRel        : 11.7.0
  DB2Rel        : 1215(NFM)
  ErrCB.Type    : SYSTEM_ERROR
  ErrCB.AuxInfo : rc=-31
  ErrCB.Code    : -1
  ErrCB.U.Msg   : Unexpected rc from XFM_Open on Source 1
  Number of Function Entries=  4
    ErrCB.N(0).Src=     FOPCMMAI 20241024 PH62918
    ErrCB.N(0).Func=    (000851) CFMOpen
    ErrCB.N(1).Src=     FOPUCMD  20241024 PH62918
    ErrCB.N(1).Func=    (012285) CompareStatement
    ErrCB.N(2).Src=     FOPUMAIN 20241024 PH62918
    ErrCB.N(2).Func=    (000920) FOPMMUTL_dynamn
    ErrCB.N(3).Src=     FOPMMAIN 20240912 PH62584
    ErrCB.N(3).Func=    (001097) Main
  
  2. Customer is performing EXTRACT+CONVERT processing. They do
  not specify a dedicated data set name for the CONVERTed file.
  While the process completes successfully, the following message
  may appear in the PROCESS REPORT:
  
  *** INFO *** CONVERTED_FILE DSNAME WAS SAME AS THE EXTRACT_FILE
  DSNAME. CONVERTED_FILE KEYWORD, OR DSN FROM DDNAME, WAS IGNORED.
  
  3. Customer is performing CONVERT process and specified input
  EXTRACT or ARCHIVE data set is located on TAPE. They do not
  specify a designated converted data set, or the specified data
  set is the same as the input data set. Optim does not diagnose
  such scenario as an error which it should.
  
  4. Customer performs INSERT processing using an EXTRACT of a
  Legacy Table (LT) located on TAPE.
  They specify the (same) destination table, which is an LT. When
  the destination LT has not been defined to
  Optim, an ABEND S0C4 may occur:
  
  CEE3204S The system detected a protection exception (System
  Completion Code=0C4).
  Location:
    Program Unit: //'UNIBUILD.FOPB70.PH62584D.FOPC(FOPGADMN)'
    Entry:        ApplyTableMappings
    Statement:    2028 Offset: +000069B8
    Traceback:
    DSA   Entry       E  Offset  Statement   Load Mod Program Unit
    1     CEEHDSP     +00004B12              CEEPLPKA CEEHDSP
    2     ApplyTableMappings
                      +000069B8  2028        FOPMDDDL FOPGADMN
    3     ddpproc     +000009B0  394         FOPMDDDL FOPGADMN
    4     ProcessInsCmds
                      +0000EC10  2757        FOPMMJBS FOPJINM
    5     dmjssins    +00004E74  610         FOPMMJBS FOPJINM
    6     dmjsmain    +00000F6E  519         FOPMMJBS FOPJINI
    7     mngojsb     +00001206  1749        FOPMMUNU FOPMCALL
    8     PromptDM    +00002ACE  1800        FOPMMUNU FOPMMENU
  
  When the LT has been defined to Optim, the "Associate Legacy
  Tables with Data Destinations" panel, presented during the
  INSERT setup under ISPF, will incorrectly show the "Source
  Dataset" as "DB2 Table".
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: 1. Optim users performing COMPARE            *
  *                 processing.                                  *
  *                 2. Optim users performing EXTRACT+CONVERT    *
  *                 processing.                                  *
  *                 3. Optim users performing CONVERT            *
  *                 processing.                                  *
  *                 4. Optim users performing INSERT processing  *
  *                 of LT EXTRACTs located on TAPE.              *
  ****************************************************************
  1. Optim is incorrectly diagnosing potential errors during
  COMPARE of tape data sets.
  2. Optim logic is flawed when attempting to determine if
  the same data set name has been specified for an EXTRACT
  with CONVERT process.
  3. Optim logic is flawed when attempting to determine if  the
  same data set name has been specified for the input and
  converted files.
  4. Optim logic is flawed when processing EXTRACTs of Legacy
  Tables from TAPE.
  

Problem conclusion

• Optim code will be corrected.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

• FOP1OSFN FOP2RRSQ FOP9APIM FOPAM00  FOPCFPMN FOPCUST  FOPCXLIB
  FOPDARCH FOPDARCJ FOPDCDB2 FOPDMDB3 FOPHSTM  FOPI4706 FOPIBDPK
  FOPINS0  FOPINS2  FOPK02   FOPK11   FOPK12   FOPMAIN  FOPMAMAI
  FOPMARCN FOPMCMAI FOPMCOLA FOPMCOLP FOPMDDDL FOPMECMN FOPMMCMR
  FOPMMJBS FOPMMUNU FOPMMUTL FOPOMN   FOPPEX1L FOPPEX1R FOPPEXDW
  FOPPEXRH FOPPEXRJ FOPPSMEX FOPRS10  FOPRS9   FOPT22H  FOPT4706
  FOPTBIPK FOPTC710 FOPTC720 FOPTCV10 FOPTCVT  FOPTCVT1 FOPTXBPK
  FOPZFMMN FOPZMAIN FOPZSUB
  

Fix information

• Fixed component name

  OPTIM MOVE FOR

• Fixed component ID

  5655V0700

Applicable component levels

• RB70 PSY UI99106

     UP24/11/20 P F411

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.