PH28624: GIM61901W LMOD CJE9BA01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE CJE9BA01 IS NOT IN THE TARGET ZONE

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• EYULPMOD applies USERMOD EYUUM01 to move local MAS modules from
  SEYULOAD to SEYULPA.
  
  But the ++MOVE statements provided in EYU$UM01 member of
  SEYUSAMP still reference modules CJE* that are not provided any
  more in CPSM 5.6.
  
  This produces the following statements in EYULPMOD job:
  
  GIM61901W LMOD CJE9BA01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9BA01 IS NOT IN THE TZONE ZONE.
  GIM61901W LMOD CJE9CM01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9CM01 IS NOT IN THE TZONE ZONE.
  GIM61901W LMOD CJE9MN01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9MN01 IS NOT IN THE TZONE ZONE.
  GIM61901W LMOD CJE9NA01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9NA01 IS NOT IN THE TZONE ZONE.
  GIM61901W LMOD CJE9PS01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9PS01 IS NOT IN THE TZONE ZONE.
  GIM61901W LMOD CJE9TS01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9TS01 IS NOT IN THE TZONE ZONE.
  GIM61901W LMOD CJE9WM01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9WM01 IS NOT IN THE TZONE ZONE.
  GIM61901W LMOD CJE9XC01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9XC01 IS NOT IN THE TZONE ZONE.
  GIM61901W LMOD CJE9XD01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9XD01 IS NOT IN THE TZONE ZONE.
  GIM61901W LMOD CJE9XL01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9XL01 IS NOT IN THE TZONE ZONE.
  GIM61901W LMOD CJE9XM01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9XM01 IS NOT IN THE TZONE ZONE.
  GIM61901W LMOD CJE9XQ01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9XQ01 IS NOT IN THE TZONE ZONE.
  GIM61901W LMOD CJE9XS01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9XS01 IS NOT IN THE TZONE ZONE.
  GIM61901W LMOD CJE9XZ01 WAS NOT MOVED BY SYSMOD EYUUM01 BECAUSE
  CJE9XZ01 IS NOT IN THE TZONE ZONE.
  GIM22701I APPLY PROCESSING WAS SUCCESSFUL FOR SYSMOD EYUUM01.
  GIM20501I APPLY PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE
  WAS 04.
  

Local fix

Problem summary

• ****************************************************************
  * USERS AFFECTED: All CICSPlex SM V5R6M0 Users.                *
  ****************************************************************
  * PROBLEM DESCRIPTION: EYU$UM01 attempts to move CJE9xx01      *
  *                      modules to the LPA but these modules    *
  *                      are not built for CICSPlex SM V5.6.     *
  ****************************************************************
  EYU$UM01 is a pre-supplied SMP/E USERMOD which can be used
  to move LPA eligible modules into the SEYULPA library.
  The EYU$UM01 USERMOD contains references to modules not shipped
  with CPSM V5.6.
  These cause message GIM61901W to be issued by SMPE, accompanied
  by return code 4.
  
  
  In a secondary issue, data set member EYU$M720 was omitted
  from the SEYUSAMP library.
  
  Additional Keywords: msgGIM61901W RC4 EYUUM01
  CJE9BA01 CJE9CM01 CJE9MN01 CJE9NA01 CJE9PS01 CJE9TS01 CJE9WM01
  CJE9XC01 CJE9XD01 CJE9XL01 CJE9XM01 CJE9XQ01 CJE9XS01 CJE9XZ01
  

Problem conclusion

• EYU$UM01 has been corrected so that the ++MOVE statements for
  CJE9xx01 modules have been removed.
  To achieve this the content of the usermod has been shifted
  right one character. Users wishing to apply usermod EYUUM01
  must first edit EYU$UM01 and move the content back one place
  to the left.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  010PC2Ÿ UI71683

Modules/Macros

• EYU$M720 EYU$UM01
  

Fix information

• Fixed component name

  CICS TS Z/OS V5

• Fixed component ID

  5655Y0400

Applicable component levels

• R30M PSY UI71683

     UP20/09/25 P F009

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.