APAR status
Closed as program error.
Error description
z/OS Debugger service for IBM Developer for z Systems Enterprise Edition 14.1.5 IBM Developer for z Systems 14.1.5 IBM Debug for z Systems 14.1.5 IBM Z Open Development 1.0.0 --- Service --- -EQAXOPT CCPROGSELECTDSN,'&&USERID.DBGTOOL.CCPRGSEL' is not resolved to the user id associated with the DB2 stored procedure, but to the WLM STC user id. (PI92966 at 13.1) -ABENDS0C4 EQA0YCUS+'16F8'x- Remote Debug Enterprise PLI side file reset during termination. (PI97595 at 13.1) -Message EQAZ182W is not correct because the region had abended in IMS Transaction Isolation. (PI98127 at 13.1) -Abend at CEEEV006.DFH3QSS+'02AE'x when CICS starts up. Caused by bad ALET in AR3 from DIAG TRAP IEAINITREGSTASK. (PI98733 at 13.1) -ABENDS0C1 in IMS Control Region while user was in IMS DEBUG session. (PH00372 at 13.1) -IMS Transaction Isolation job card generation not including the department. The job card generator should consider any preferred job card parameters from DTU option 0. (PH00425 at 13.1) -When using DTU panel 4.6 to reserve more classes for IMS Transaction Isolation, the selected classes are not reserved for IMS Transaction Isolation. (PH01553 at 13.1) -IMS Transaction Isolation EQANIPSB deregister ALL doesn't work. (PH01787 at 14.1) -When IMS Transaction Isolation is run on multiple IMS systems on an LPAR, and those systems are also running an IBM Tools product called Workload Router, various IMS system abends can occur because of serialization issues. Among these are U0705, U0768 and U0780. (PH02157 at 13.1) -In IMS delay debug, the IOPCB is updated by z/OS Debugger. (PH02115 at 14.1) -EQA4020E message (LLA) issued for Language Environment callable service routines such as CEEGTST. For instance, when debugging you see the following messages in the log: EQA1334I The operating system generated the following message: EQA1335I EQA4020E Load module information could not be retrieved for module CEELOCT because the loading service (provider) that loaded the module loaded it from LLA and no matching copy was found in either EQALOAD or STEPLIB. The load module cannot be debugged. (PH01874 at 13.1) -z/OS Debugger v14.1.3 - APAR PI94994 PTF UI56228. After applying above maintenance users may experience ABENDS0C4 in Fault Analyzer when user attempts to debug an IMS transaction: IDI0047S IBM Fault Analyzer internal ABENDS0C4. Users performing a delayed debug of an IMS transaction. Abend occurs if debug session is exited prior to completion of the program. If user does a delayed debug and runs a program to completion, i.e. F9 prior to exiting debug then there is no abend. If the user stops debugging before program completion and does a QQ or PF3 etc. then FA shows an internal ABENDS0C4. (PH02798 at 14.1) --- End Service ---
Local fix
Problem summary
**************************************************************** * USERS AFFECTED: * * z/OS Debugger 14.1 users who have the problems described in * * the Problem Description. * **************************************************************** * PROBLEM DESCRIPTION: * * z/OS Debugger service for * * IBM Developer for z Systems * * Enterprise Edition 14.1.5 * * IBM Developer for z Systems 14.1.5 * * IBM Debug for z Systems 14.1.5 * * IBM Z Open Development 1.0.0 * * * * * * --- Service --- * * * * * * -EQAXOPT * * CCPROGSELECTDSN, * * '&&USERID.DBGTOOL.CCPRGSEL' * * is not resolved to the user id * * associated with the DB2 stored * * procedure, but to the WLM STC user * * id. * * (PI92966 at 13.1) * * * * -ABENDS0C4 EQA0YCUS+'16F8'x- Remote Debug Enterprise PLI * * side * * file reset during termination. * * (PI97595 at 13.1) * * * * -Message EQAZ182W is not correct because the region had * * abended * * in IMS Transaction Isolation. * * (PI98127 at 13.1) * * * * -Abend at CEEEV006.DFH3QSS+'02AE'x when CICS starts up. * * Caused * * by bad ALET in AR3 from DIAG TRAP IEAINITREGSTASK. * * (PI98733 at 13.1) * * * * -ABENDS0C1 in IMS Control Region while user was in IMS DEBUG * * session. * * (PH00372 at 13.1) * * * * -IMS Transaction Isolation job card generation not including * * the department. The job card generator should consider any * * preferred job card parameters from DTU option 0. * * (PH00425 at 13.1) * * * * -When using DTU panel 4.6 to reserve more classes for IMS * * Transaction Isolation, the selected classes are not * * reserved * * for IMS Transaction Isolation. * * (PH01553 at 13.1) * * * * -IMS Transaction Isolation EQANIPSB deregister ALL doesn't * * work. * * (PH01787 at 14.1) * * * * -When IMS Transaction Isolation is run on multiple IMS * * systems * * on an LPAR, and those systems are also running an IBM Tools * * product called Workload Router, various IMS system abends * * can * * occur because of serialization issues. Among these are * * U0705, * * U0768 and U0780. * * (PH02157 at 13.1) * * * * -In IMS delay debug, the IOPCB is updated by z/OS Debugger. * * (PH02115 at 14.1) * * * * -EQA4020E message (LLA) issued for Language Environment * * callable service routines such as CEEGTST. * * For instance, when debugging you see the following messages * * in * * the log: * * EQA1334I The operating system generated the following * * message: * * EQA1335I EQA4020E Load module information could not be * * retrieved for module CEELOCT because the loading * * service (provider) that loaded the module loaded * * it * * from LLA and no matching copy was found in * * either * * EQALOAD or STEPLIB. The load module cannot be * * debugged. * * (PH01874 at 13.1) * * * * -z/OS Debugger v14.1.3 - APAR PI94994 PTF UI56228. * * After applying above maintenance users may experience * * ABENDS0C4 in Fault Analyzer when user attempts to debug an * * IMS * * transaction: * * IDI0047S IBM Fault Analyzer internal ABENDS0C4. * * Users performing a delayed debug of an IMS transaction. * * Abend * * occurs if debug session is exited prior to completion of * * the * * program. * * If user does a delayed debug and runs a program to * * completion, * * i.e. F9 prior to exiting debug then there is no abend. * * If the user stops debugging before program completion and * * does * * a QQ or PF3 etc. then FA shows an internal ABENDS0C4. * * (PH02798 at 14.1) * * * * --- End Service --- * **************************************************************** * RECOMMENDATION: * * Installations that need these fixes should install this * * service. * **************************************************************** Miscellaneous service.
Problem conclusion
Service available.
Temporary fix
Comments
APAR Information
APAR number
PH04803
Reported component name
ZOS DEBUGGER
Reported component ID
5724T0713
Reported release
E10
Status
CLOSED PER
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2018-11-01
Closed date
2018-11-29
Last modified date
2019-02-06
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
Modules/Macros
EQA10XSC EQA00POP EQA00CEE EQAS0OHH EQACSINT EQANCDTX EQA00EHI EQAS0DU EQAS0DBH EQAS0OHC EQAS0DBJ EQAS0DBG EQA00TVT EQA01TSR EQA00STU EQASPDBI EQA00XML EQA10PRC EQA05CUS EQA0SMSU EQA00EHB EQAS0BND EQANCEST EQAS0HKS EQADCDEL EQA10OSM EQA00QSS EQA0CFUN EQAS0OHT EQA0SCLU EQAS0OHV EQANCXHA EQANCDBG EQAS0MVS EQA0AIP2 EQA0AIP1 EQAAFSPS EQADCMGR EQAS0DTL EQAS0EVH EQAS0ANC EQA00SVC EQA00SET EQAYBGID EQA00ABE EQAS0EH2 EQA00AEI EQAS0FIN EQA0SDTL EQAS0DEI EQANMDBG EQA0CTRU EQAEV006 EQA00CIC EQA0SRQ1 EQA00EMG EQA01SVC EQA0SRQ2 EQA0SRQ4 EQA00AEH EQA00FA EQAS0EHI EQA01SV2 EQAS0EHB EQA00LIS EQA00NMU EQANCFTC EQANMEST EQA00QCS EQA00CHG EQASAIP1 EQAS0POP EQAS0M99 EQA0CPLT EQAS0CEE EQASAIP2 EQA00LMS EQA00TMM EQANIAFE EQA0SUTI EQA00DU EQA0CINF EQANCFRM EQANCXEI EQANIPSB EQAS0SET EQAS0ABE EQA50VAT EQA00DLD EQA00CV EQA00A64 EQADCCXR EQADCREP EQA0SRP1 EQAYLIST EQA0SRP2 EQA0SRP4 EQACSSIF EQADCCN1 EQADCVSA EQA00BKP EQADCCN0 EQADFHNO EQAXMSGT EQA00OEI EQA00GDV EQA00LNG EQAS0QCS EQA00NAM EQAS0NMU EQA00TMX EQATIEDT EQA10XIF EQANCHAB EQATIEXT EQA0XCUS EQA0OIP1 EQA0PDBI EQA0OIP2 EQAXTIMS EQASG006 EQANISET EQAS0EMG EQANCRTO EQATIEX2 EQANCRET EQA10MVS EQANCREL EQANCXAB EQAS0A64 EQA00CND EQA10DTL EQA0SDU EQA03CUS EQA50XIO EQA0SDLD EQA10M99 EQASXCUS EQA00LST EQANICTL EQAS0OSM EQA00HKS EQADCTSQ EQA00DTA EQA00TSR EQA00OHT EQAPMPSL EQANBSWT EQA00OHV EQA00E53 EQAYASSC EQACMDRV EQA00DBG EQANCABE EQA00DBH EQA00OHC EQA00DBJ EQA00OHE EQA00OHH EQA00OHI EQA0SQFY EQAS0LNG EQA00OHL EQA00BND EQAS0NAM EQA0SCHG EQAS0LMS EQA00DEI EQA00FIN EQA00EH2 EQAIIRMG EQAYVTAM EQA00EXE EQA0SCL2 EQA0SCL1 EQADCXXT EQANCCSE EQANICRT EQA00E70 EQAS0GDV EQA00E71 EQAD3XXT EQANXPOP EQANCLDE EQAYBCNM EQAYSMMN EQA00E66 EQA00E67 EQA00E68 EQA00E69 EQAXFOR EQANCTER EQA00MEM EQA00EVH EQA00DTL EQALMA EQANMPOP EQA0STKH EQAS0CND EQA50VIO EQAYFGID EQA00E62 EQA00BPP EQA00E63 EQA00E64 EQA00E65
Fix information
Fixed component name
ZOS DEBUGGER
Fixed component ID
5724T0713
Applicable component levels
[{"Business Unit":{"code":"BU029","label":"Software"},"Product":{"code":"SSJK49","label":"IBM Developer for z Systems"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"E10"}]
Document Information
Modified date:
24 June 2022