PH00860: DISPLAY ZPARMS ADB2Z2Z IBM0537S ONCODE 8097 ONCODE8097 DATA EXCEPTION TRANSSPRM 0C7 ADB2ZZ 18/07/26 PTF PECHANGE

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• After applying APAR PI92385/ PTF UI56984, selecting option 1
  ("Display Parameters/Generate DSNZPARM source") on panel
  ADB2Z2Z may result in the following error:
   IBM0537S ONCODE=8097  Data exception
            From entry point TRANSSPRM at statement 3342 at
  compile unit offset >offset< at entry offset >offset< at
        address >address<
   Abend 0C7000 hex occurred processing command 'ADB2ZZ  '.
  Note: Statement numbers are approximate, and may vary somewhat,
  depending on release or other maintenance applied.
  

Local fix

• N/A
  

Problem summary

• ****************************************************************
  * USERS AFFECTED: Users of the DB2 Administration Tool for     *
  *                 z/OS.                                        *
  ****************************************************************
  * PROBLEM DESCRIPTION: This APAR addresses two issues:         *
  *                                                              *
  *                      1. After applying APAR PI92385 /        *
  *                      PTF UI56984 (zparms for DB2 V12         *
  *                      support), it is possible to receive     *
  *                      error IBM0537S ONCODE=8097              *
  *                      Data exception.                         *
  *                                                              *
  *                      2. ZPARM RLFERRDSTC is not              *
  *                      displayed.                              *
  ****************************************************************
  * RECOMMENDATION:                                              *
  ****************************************************************
  1. After applying APAR PI92385/ PTF UI56984, selecting
  option 1 ("Display Parameters/Generate DSNZPARM
  source") on panel ADB2Z2Z may result in the following
  error:
  
  IBM0537S ONCODE=8097 Data exception
  From entry point TRANSSPRM at statement 3342 at
  compile unit offset >offset< at entry offset >offset< at
  address >address<
  Abend 0C7000 hex occurred processing command 'ADB2ZZ '.
  
  Note: Statement numbers are approximate, and may vary somewhat,
  depending on release or other maintenance applied.
  
  The reason for this error is that the value of
  QUERY_ACCEL_WAITFORDATA is not in the expected
  format. This APAR adds data format validation for
  QUERY_ACCEL_WAITFORDATA.
  
  2. ZPARM RLFERRDSTC is not displayed. This APAR adds the
  missing support for this ZPARM.
  

Problem conclusion

• Problem has been resolved.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UI58144

Modules/Macros

•    ADBHZ2Z0 ADBHZ2Z1 ADBHZ2Z2 ADB2ZZ   ADB2ZZAL
  ADB2ZZAP ADB2ZZMN ADB2ZZOT ADB2ZZST ADB2ZZUT ADB2ZZVB ADB2ZZVC
  ADB2Z2Z  ADB41    H0IHC10
  

Fix information

• Fixed component name

  DB2 ADMIN TOOL

• Fixed component ID

  568851500

Applicable component levels

• RC10 PSY UI58144

     UP18/09/07 P F809 Ø

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.