IBM Support

OA62274: Check for enabled slip PER traps

A fix is available

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as new function.

Error description

  • New Function
    

Local fix

Problem summary

  • ****************************************************************
    * USERS AFFECTED:                                              *
    * All users of z/OS Runtime Diagnostics   for HBB77B0, HBB77C0 *
    * and HBB77D0.                                                 *
    *                                                              *
    *                                                              *
    ****************************************************************
    * PROBLEM DESCRIPTION:                                         *
    * A new event in Runtime Diagnostics will be created to detect *
    * if a                                                         *
    * SLIP PER trap is active.                                     *
    * New Function (NF).                                           *
    ****************************************************************
    * RECOMMENDATION:                                              *
    ****************************************************************
    A new event in Runtime Diagnostics will be created to detect if
    a SLIP PER trap is active.
    New Function (NF).
    

Problem conclusion

  • If an active PER trap is found, Runtime Diagnostics will display
    
    the new event PERTRAP. PERTRAP event details will display
    PER trap ID and the date/time it was enabled under HZR0200I
    message.
    
    DOC hold for
    z/OS Problem Management
    SC23-6844-xx
    
    The new event PERTRAP details will be added under
    Specific Runtime Diagnostics event reports as follows.
    
    PERTRAP
    Runtime Diagnostics looks for an active PER slip trap set on
    a system.  If an active PER slip trap is found, runtime
    Diagnostics will report PERTRAP event.  The details of event
    will display the PER slip trap id and the date/time it was
    enabled.  This new event will be able to be invoked from the
    MODIFY HZR, ANALYZE command and the internal API.
    PER trap may affect performance of a system.  The PERTRAP
    event reminds the trap on a system and its knowledge can
    be used to troubleshoot system performance problems.
    
    | HZR0200I RUNTIME DIAGNOSTICS RESULT
    | SUMMARY: SUCCESS
    | REQ: 1 TARGET SYSTEM: SY1 HOME: SY1 2021/10/08 14:44:32
    | INTERVAL: 60 MINUTES
    | EVENTS FOUND: 1
    | PRIORITIES: HIGH:0 MED:1 LOW:0
    | TYPES: PERTRAP:1
    |
    | ACTION: Disabling the PER trap with SLIP MOD,DISABLE,ID=0002
    | ACTION: may help improve system performance.
    |
    ---------------------------------------------------------------
    | EVENT 1: MED :PERTRAP          SYSTEM: SY1      2021/10/08
    14:4
    | A SLIP PER trap with ID: 0002 was ENABLED on 10/08/2021 at
    14:4
    | If you are experiencing a loss in system performance a PER
    trap
    | may be a contributing factor.
    |
    | ACTION: Disabling the PER trap with SLIP MOD,DISABLE,ID=0002
    | ACTION: may help improve system performance.
    |
    ---------------------------------------------------------------
    | Figure nn. HZR event for PERTRAP
    |
    | Add the following Under 'Syntax and parameters' for the
    | MODIFY HZR command (all Releases)
    | - PERTRAP|NOPERTRAP will be added to the list of DEBUG=
    |   parameters for MODIFY HZR, ANALYZE.
    | - PERTRAP will be included when DEBUG=ALL specified.
    |
    | For HBB77D0 only:
    | - PERTRAP will be added to the list of EVENTS= parameter for
    |   modify HZR, ANALYZE.
    | - PERTRAP will be included when EVENTS=ALL specified.
    |
    | z/OS MVS System Messages Volume 6 (GOS - IEA)
    | SA38-0673-xx
    | For message HZR0200I, following will be added under  TYPES:
    | TYPES:
    | PERTRAP:nn
    | PERTRAP event diagnosed.
    |
    | ACTION: Disabling the PER trap with SLIP MOD,DISABLE,ID=0002
    | ACTION: may help improve system performance.
    

Temporary fix

Comments

APAR Information

  • APAR number

    OA62274

  • Reported component name

    RUN TIME DIAGNO

  • Reported component ID

    5752SCRTD

  • Reported release

    7C0

  • Status

    CLOSED UR1

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    NoSpecatt / Xsystem

  • Submitted date

    2021-10-08

  • Closed date

    2022-02-04

  • Last modified date

    2023-11-10

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

    UJ07726 UJ07727 UJ07728

Modules/Macros

  • HZRRSTRM HZRINIT  HZRPOBEN HZRRSMIS HZROCKWD HZRMIREC HZROEVNT
    HZRINKWD HZRIMAIN HZROMANP HZRRSSRV HZRODISP HZRPCONT HZROCSRV
    HZRRSRQV HZROCEVT HZROCLXA HZRRSPRS HZRRSRQD HZRINLXA HZRMIMST
    HZRWXSRV HZRINPVT HZRPSTAN HZRMAPIP HZRAJES2 HZROCPAR HZRINMTR
    HZRWXEXT HZRPSTCR HZRMIDMP HZRINCRE HZROCPMG HZRPWTOR HZRASRHT
    HZRINPMG HZRAASID HZRINCR2 HZRRSEOM HZROCACT HZRINACT HZROCPRC
    HZRWXCOM HZRMMTAB HZRMJES2 HZROCMC  HZRPCRTR HZRTMSGC HZRPZOPJ
    HZRRSCRE HZRPSLIP
    

Publications Referenced
SC236844xxSA380673xx   

Fix information

  • Fixed component name

    RUN TIME DIAGNO

  • Fixed component ID

    5752SCRTD

Applicable component levels

  • R7D0 PSY UJ07728

       UP22/02/18 P F202

  • R7B0 PSY UJ07726

       UP22/02/18 P F202

  • R7C0 PSY UJ07727

       UP22/02/18 P F202

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.

[{"Business Unit":{"code":"BU011","label":"Systems - zSystems software"},"Product":{"code":"SG19O"},"Platform":[{"code":"PF054","label":"z Systems"}],"Version":"7C0"}]

Document Information

Modified date:
10 November 2023